|
Tender For Purchase Of Dr System For X-Ray Machine And Imaging Cassettes For Cr System , A. Dr System For X Ray Machine , Technical Specification: Flat Panel Detector , The Detector Should Be Both Wired And Wireless For Data Communication. , The Detector Should Be A Flat Panel Detector With Cesium Iodide Scintillator , The Size Of The Detector Should Be 35 Cm X 43Cm (14”X17”) Or More: Total -4 , Should Have Spatial Resolution Of 3 Lines Pair / Millimeter Or Better , Pixel Pitch Should Be 150 Micron Or Less , Detector Quantum Efficiency (Dqe) Should Be 70% Or More @ Zero Lines Pairs (Near Zero) & Mtf Minimum 80% At 1 Cycle , The Detector Should Be Water And Humidity Resistant With Minimum Ipx3 Standard. , The Active-Matrix Size Should Be 2.3K X2.3K Or More , Should Have A Minimum Grey Scale Of 16 Bits/ Pixel , Image Pre-Viewing Should Be Available In About Less Than 5 Sec After Exposure And The Cycle Time Should Be Less Than 10 Seconds. , Aid Of 16 Bit Or Better. , Detectors Should Be Supplied With Two External Batteries And The Supplied Charger Should Be Able To Charge Two Batteries At A Time. Detector With Inbuilt Battery Should Not Be Quoted. , The Detector Should Be Able To Work Without The Battery Also Under Wired Mode. , Detector Should Be Light Weight (< 3Kg) , Detector Should Have Software Which Corrects The Effect Of Scatter Radiation On Acquired Image By Processing, Without The Need Of Physical Grid. It Should Be Quoted As Optional. , Withstand Load: Point Load – 100 Kg Or More, Surface Load – 300 Kg Or More , Acquisition Workstation And Console , Should Have A High Resolution Tft/Lcd Monitor Of Minimum 17” Size Or More: Total- 2 , The Console And Acquisition Workstation Pc To Be Supplied Should Be Of Latest Generation With At Least I3 Processor, 4 Gb Ram & 500 Gb Hdd. , Operating Console Should Have Facility For Patient Identity Entry, Viewing And Processing Images. , Operating Work Station Should Have Facility Forviewing ,Postprocessing & Printing Of Images. , Window Level Adjustment Should Be Available I.E. Exam, Process, View & Print, Level Window. , Post Processing Ww/Wl, Rotate, Zoom, Flip, Invert, Annotation, Measurement, Zoom, Image Cropping Are Should Be Available. , Dicom Modality Work List, Dicom Print, Dicom Mpps, And Dlcom Storage Services Should Be Offered Standard With Valid And Genuine Licenses. , Dry Imager: , Two Tray Dry Laser Imager Of 508 Dpi Or More To Be Supplied. , Detector, Acquisition Software And Laser Printer Should Be Of Same Brand. , Gray Scale Resolution :14 Bits Or Mote , Processing Capacity Should Be Minimum 80 Films/Hr For The Largest Size (14"X 17") & 100 Films/Hr For 10”X14”. , Acceptable Film Size :14”X 17”, 10”X14”/11”X 14”, 10 X 12” & 8 X 10” Etc , Output Time For First Image Of 14”X17” Testing Purpose: Min.100 Sec Or More. , Capable Of Printing Images In Dicom 3.0 Format Or Latest Version. , Quality Certificate , European Ce For Fpd& Printer , Company Should Have Iso 9001:2015, Iso 13485:2016 Certificate. , Manufacturer Didn’T Have Blacklisted /Debar From Any State Govt/ Psu/Central Govt Institute In Past Two Years. No Stay Order And Pending Debar Case Is Pending In Indian Penal Court. , Fpd Not From Made In China Is Accepted , B. Imaging Cassette For Cr System (Ip Cassette Type Cc) , For Fuji Make Dry Imager(Suitable In Prima T Fujifilm Digitalcr , 14" X 17" (35.4 X 43.2 Cm) , 14" X 14" (35.4 X 35.4 Cm) , 10" X 12" (25.7 X 30.5 Cm) , 8" X 10" (20.3 X 25.4 Cm)
|
