|
Tender For Providing Laying And Jointing Of Hdpe Pipeline For Developing Dma Of Sector 09 Malviya Nagar For 24X7 Water Supply Including Interconnection Under City Sub Division Vi South Jagatpura Jaipur Under Jurisdiction Of City Division Iii South Phed Jaipur , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means In Trenches Of Required Width And Gradient For Laying And Jointing Of Pipe Line Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, Depth Up To 1.5 Mtr. Including Taking Out The Excavated Soil, And Then Returning The Soil As Required In Layers Not Exceeding 20Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering Etc. And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 Mtr. Including Required All Safety Provisions Etc.: All Kinds Of Soil , Dismantling Of Flexible Pavement For Pipe Line Line And Chambers By Mechanical Means Using Pneumatic Tools, Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1000 Meters. Measurement For Dismantled Trench To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shall Be Made Be Made For Trench Width More Than Specified, Re-Handling Of Material/Earth To Complete The Tasks Per Technical Specification And Scope Of Work , Bituminous Courses , Granular Courses , Sitc Of Bulk Flow Meter With Removable Mechanism Class "B" Confirming To Iso:4064:2005/ Is: 2373 Of Approved Make Of Following Dia Sized Pipelines And Specifications Complete: Media : Water (Clear ), Temp. 50 Deg., Pr. Rating: Pn16, Protection Type: Ip- 68, Body Material : Is-210 Gr. Fg-200, Accuracy Class :Class B (±2 % @ Nominal Flow Rate), Magnetic Drive, Dry Dial, Epoxy Powder Coated, Pulse Out Put Option, Anti-Magnetic Protection Including All Materials And Making Connection With Existing Pipeline Required For Bulk Flow Meter Including Cutting The Existing Pipeline Etc. Complete In All Respect As Per Technical Specification And As Per Direction Of Engineer In- Charge. Note: Rates Are Exclusive Of Tail Piece / Dismantling Joints And Earth Work , Bfm 150 Mm , Providing And Fixing Of Reinforced Ferro-Cement Drain Covers Designed For Aa Class Loading Duly Marked On Cover With Adequate Steel Reinforcement Having Thickness 75Mm To 150Mm Anti Corrosive Bitumen Painted M.S. Plate , Rim And M.S. Lifting Hooks, Admixtures Like Plasticizer, Bond Improving Compound, Shrinkage, Resistance Compound, Abrasion Resistant Complete As Per Approved Design Etc. , Standard Size 600X800mm (75Mm Thick) For Span 300 To 450Mm , Repairs To Plaster Of Thickness 12Mm To 20Mm In Patches Of Area 2.5 Sq. Metres And Under Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing And Plastering The Surface Of The Walls Complete Including Disposal Of Rubbish To The Dumping Ground Within 50 M Lead With Cement Mortar 1 :4 ( 1 Cement : 4 Coarse Sand) , Providing, Lowering, Laying And Jointing In Trenches,Standard Lengths Hdpeisi Marked Pipes As Per Is-4984: 1995 (Amended Up To Date)With Necessary Jointing Material Like Mechanical Connectors, I.E. Thread/ Insert Joint/ Quick Release Coupler Joint/ Compression Fitting Joint Or Flanged Joint And Specials Jointing Pipe Byelectro Fusion Welding Method, Including All Taxes , Transportation And Freight Charges, Inspection Charges, Loading/ Unloading Charges, Stacking Of Pipes, Including Cost Of Labour And Material, Specials (Tee, Bend Etc.), Satisfactory Hydraulic Testing, Disinfection, Commissioning Etc. Complete As Per Technical Specifications And Direction Of Engineer-In-Charge Of Following Class And Diameter. (Excluding Earth Work) . Note : Providing And Fixing Of All Requisite Specials As Per Drawing, Design And Layout Are Inclusive In Rm Measurement Of The Item And Shall Not Be Paid Separately. Supply May Be In Coil Or Straight Length In 6 M/12 M. , Hdpe Pe-100 Pn-06 , 110 Mm , Providing And Fixing Of Flanged/ Plain Ended Ms Specials Made From Ms Sheet Strips Of Relevant Is Specification Of Approved Thickness By Welding,Lowering,Laying,Aligning,Fixinginpositionatalllevel/ Depths In Trenches Complete Includingall Taxes, Material,Labour, Inside Lining, Outside Coating, Testingandcommissioning Alongwithpipelineaspertechnicalspecifications Anddirection Of Engineer-In-Charge. , Ms Pipespecialsup To600mmdia (Withminimum5mmthickness Sheet) , Providing, Lowering, Aligning, Fixing In Position In Pipe Line, Ci D/F Sluice Valves Straight And Pocket Less Body Passage Of Approved Make Of Following Pressure Rating & Dia Complete, Confirming To Is:14846 (Amended Up To Date) And Of Following Specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand Wheel Of Grey Cast Iron Of Is:210/ Fg200 Stem - Aisi- 410 ,Body Seat Ring, Wedge Facing Ring & Bushes - Ltb2/ Ss , Face To Face Dimensions As Per Is 14846/2000 (Amended Up To Date) ,Epoxy ( Non-Toxic- Suitable For Drinking Water) Applied Inside And Outside, Flanges Drilled As Per Is 1538. Nut-Bolt Confirming To Is:1363 And Is: 1367/ Cs/ Galvanised Steel Insertion Rubber Of Black Epdm 6Mm Thick .Sluice Valves Including All Jointing & Jointing Material, Labour, Testing And Commissioning Along With Pipe Line As Per Technical Specifications And As Per Direction Of Engineer-In-Charge.Note: Rates Are Exclusive Of Tail Piece/ Dismantling Joints And Earth Work. , Manually Operated Ci Sluice Valve Of Class Pn-1.0 , 100 Mm Hw , Work Of Lnter Connection In Di/Ci/Hdpe Pipe Line Including Dismantling Of Bt Road/ Cc Road/ Excavation Of Soil, Cutting Of Existing Pipeline, Jointing Of Tee (Complete) And Other Specials Excluding Sluice Valve, Dewatering, Transportation From Je Store And Providing Adequate Safety Of Site & Testing For Water Proof Interconnection Using His Own T&P, Labour & Dewatering Pump Etc. Required To Complete The Job. (Material Such As Tee/ Tee Clamp/ Rubber Sheet/Cid Joints Required For Lnter Connection Shall Be Provided By The Department Free Of Cost). , In Bituminous Road , 80-100 Mm Ci/Di/Ms , 125-150 Mm Ci/Di/Ms , Dismantling Of Cement Concrete Pavement For Pipe Line Line And Chambers By Mechanical Means Using Pneumatic Tools, Cutting The Peripheral Edge By Cc Cutter, Breaking To Pieces Not Exceeding 0.02 Cum In Volume And Stock Piling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1000 Meters. Measurement For Dismantled Trench To Be Madeas Per Standard Trench Width Specified In Tender Document And No Extra Payment Shall Be Made Be Made For Trench Width More Than Specified, Re-Handling Of Material/Earth To Complete The Tasks As Per Technical Specification And Scope Of Work.
|
