|
Tender For Special Repair To Bldg No 35,36,37 And 42 In Tech Area At Airforce Station Kalaikundaunder Ge (Af) Kalaikunda.; 1 Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr-in-Charge 2 Demolition of cement concrete of any description and in any position not otherwise specially privided for (unreinforced) complete all as specified and as directed by Engr-in-Charge 3 M&L for 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in sub-floors, sub-bases, floors, pavings etc complete all as specified and as directed by Engr-in-Charge 4 M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engr-in-Charge 5 M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade pointed with grey cement and pigment complete all as specified and as directed by Engr-in-Charge 6 M&L for Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match 1:2:4 type B1 using 20mm graded stone aggregates complete all as specified and as directed by Engr-in-Charge 7 M&L for 4 mm thick non asbestos fibre cement building boards fixed or laid / inserted to Anodisedaluminium snap grid frame work size of grid 605x605 mm frame work for false ceillingHangerswith6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including Dismantling of existing unserviceable ceilling boards any thickness, including cover fillets complete allas directed by Engr-in-Charge 8 Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-in-Charge 9 Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work, roof trusses etc complete all as specified and as directed by Engr-in-Charge 10 M&L for Second class hard-wood in scantlings, clean sawed timber framed and fixed complete all as specified and as directed by Engr-in-Charge 11 M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed by Engr-in-Charge 12 S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge 13 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge 14 S&F Curved Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engr-in-Charge 15 Dismanting of wrought iron or mild steel work af any description not otherwise provided for complete all as specified and as directed by Engineer-in-charge 16 S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe 410 W Gde 250 E Quality A complete all as specified and as directed by Engr-in-Charge 17 S&F rolled mild steel work confriming to Fe490 Gde E-250 Quality A as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engr-in-Charge 18 M&L for preparation of new or previously untreated steel or iron surfaces of any description over 10cm in girth or width not otherwise described and applying one coat of red oxide , zinc chrome primer and two coats of synthetic enamel paint complete all as specified and as directed by Engr-in-Charge 19 Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing downwith water etc complete all as specified and as directed by Engr-in-Charge 20 M & L for screed or bedding layer 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed by Engr-in-Charge 21 M & L for Rendering 10mm thick in cement mortar 1:3 finished even and fair on vertical surfaces on walls for fixing of dado / skirting tiles complete all as specified and as directed by Engr-in-Charge 22 M&L for Light Shade Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge 23 M&L for Light Shade Virified Ceramic tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge 24 M&L Non - skid Ceramic coloured joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge 25 M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engr-in-Charge 26 Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and as directed. 27 Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and as directed. 28 S & Ftubes 15mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. 29 S & F tubes 20mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors (concealed) complete all as specified and as directed. 30 S&F in repairs Vitreous Chinaware Urinal with fixing accessories of make Jaquar Model No. URS-WHT-132530 size 370x315x620mm or equivalent make complete all as specified and as directed by Engr-in-Charge 31 S&F in repairs 8mm thick glass urinal partition of make Jaquar model No. JSE-CHR-810UC450X height 900mm, width 450mm or equivalent make complete all as specified and as directed by Engr-in-Charge 32 S&F in repairs Vitreous Chinaware Table Top Wash Hand Basin og make Jaquar Model No. JDS-WHT-25907N thin rim table top basin of rectangular shape size 252x415x140mm complete all as specified and as directed by Engr-in-Charge 33 S&F in repairs Chrome Plated bottle trap 32mm size of make Jaquar Model No. ALD-769L250x190 of 32mm size with 300mm & 190mm long wall connection pipes and wall flange or equivalent make complete all as specified and as directed by Engr-in-Charge 34 S&F in repairs Chrome Plated wall mounted mixer for wash hand basin including exposed part kit of single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, wall flange, nipple & spout ARI-39233NK with and including concealed body for single lever basin mixer wall mounted ALD-233N of make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 35 S&F in repairs Single peace concealed cistern body (front or top actuation) with floor mounting frame, installation kit and P-type drain pipe connection set for wall hung wc (without flush control plate) complete all as specified and as directed by Engr-in-Charge 36 S&F in repairs CP Concealed cistern control plate model No. JCP-CHR-352415 Control Plate Kubix of make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 37 S&F in repairs Vitreous chinawate wall hung commode rimless, blind installation type Model No. KUS-WHM-35953BIUFSM size 360x500x335mm with UF soft close slim seat cover, hinges, accessories set of make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 38 S&F in repairs Hand Shower Chrome Plated with 1meter long tube Model No. ALD-579 Hand Shower (Health Faucet) with 1 meter long easy flex tube in chrome finish and wall hook with NRV of Make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 39 S&F Chrome Plated Toilet Roll Holder of Model AKP-35751P of Make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 40 S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement dia of outlet 75mm complete all as specified and as directed by Engr-in-Charge 41 S&F Chrome Plated Towel rack 600mm long Model No. CAN-1181S of Make Jaquar or equivalent complete all as specified and as directed by Engr-in-Charge 42 S & F in repairs coloured vitreous China wash basin, white, flat back, size 550 x 400mm including pedestal, waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed andbrackets including cutting for and pinning in ends of brackets or erecting stand etc. all as specifiedand directed. 43 S & Fin repairs 15mm bore fancy type CP Pillar taps fancy type screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed foriron pipe and fixed complete all as specified and as directed. 44 S&F 600mm x 450mm bevelled edge mirror of selected quality glass of 5.5mm thick, mounted on 6mm thick AC building board and fixed to wall with wooden plugs with & including chromium plated brass screws and cup washers complete all as specified & as directed. 45 S & Fin repairs Vitreous China wash down water closet pan (pedestal pattern), white/coloured (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. 46 S & F in repair Plastic water closet seat,(white colour), closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicefor pedestal pan complete all as specified and as directed. 47 S & F in repairs Vitreous China Urinal, Half stall type, white/coloured (excluding flushing cistern, flush pipe and waste pipe)including providing fixing plugs bedding urinal against wall etc all as specified and directed . 48 S & F grating doom 125 mm dia of PTMT (minimum weight 25gms ) complete all as specified and directed. 49 S & F in repairsPVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalvefloat and handle including brackets complete all a specified and as directed. 50 S & Fin repairsCP fancy type bip taps 15mm screw down for iron pipe or for brass ferrule complete all as specified and as directed. 51 S & Fin repairs fancy type CP stop cock/angle cock (concealed type)15mm screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and as directed. 52 S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min. weight 60gms) complete all as specified and as directed by Engr-in-Charge 53 S & Fin repairs PVC connections 15mm size withPTMT nuts of length 450mm complete all as specified and as directed. 54 S & F in repairs high density polyethylene pipe(HDPE), 32 mm dia for WHB or sink complete all as specified and as directed. 55 S&F PVC (SWR) pipes 100mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge 56 S&F PVC (SWR) bends any radius 100mm dia complete all as specified and as directed by Engr-in-Charge 57 S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engr-in-Charge 58 S&F PVC (SWR) bends any radius 75mm dia complete all as specified and as directed by Engr-in-Charge 59 M & L 10mm thick rendering in cement mortor 1:6 on fair faces of brick work and finishing surface even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge 60 M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces with cement mortar 1:4 mixed with liquid water proofing compound @ 0.25% by weight of cement or as per manufacturer instruction and finishing the surface even & smooth without using extra cement complete all as specified and as directed.Note:- Liquid water proofing comound shall be measured & paid separately complete all as specified and as directed by Engr-in-Charge 61 Material and labour for applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of primer to new plastered of wall (including chajja, facia & ceiling surface) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed. 62 Material and labour for complete removal of existing treatment and applying two coat of 100% acrylic exterior emulsion paint in camouflage pattern (Three colour as approve by GE) over and including a coat of primer to old plastered or unplastered sufaces of wall (including chajja, facia) including preparation of surface of any height including all necessary scaffolding complete all as specified and as directed. 63 Material and labour for preparation of newly plastered/putty wall surfaces and applying two coats of acrylic distemper 1st quality over a coat of wall care putty (1.5 mm thick) complete all as specified and as directed. 64 M&L for complete removal of existing treatment on wall surfaces and applying two coats of distemper oil emulsion over a coat of alkaline resistant primer including Providing and applying 1.5 mm thick white wall care putty over plastered surface to prepare the surface even and smooth, complete all as specified and as directed 65 Taking down chowkat or frames exc 1.5 sqm but n exc 4.0 sqm each with shutter (without taking off shutters from the frame) complete all as specified and as directed by Engr-in-Charge 66 Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed by Engr-in-Charge 67 S&F Anodised aluminium Powder Coated (minimum thickness of powder coating 50 micron)frame for doors, windows andventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. 68 S&F Anodised aluminium frame for doors, windows andventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engr-in-Charge 69 S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and as directed by Engr-in-Charge 70 S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engr-in-Charge 71 S&F Powder Coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodisedaluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge 72 S&F (Sliding Shutters) Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and as directed by Engr-in-Charge 73 S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but n.exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge 74 S&F brass 4-levers mortice lock, vertical type , size 100mmcomplete all as specified and as directed by Engr-in-Charge 75 S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty. complete all as specified and as directed by Engr-in-Charge 76 S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-in-Charge 77 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed by Engr-in-Charge 78 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engr-in-Charge 79 S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge 80 S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engr-in-Charge 81 S&F 100mm long stainless steel butt hinges complete all as specified and as directed by Engr-in-Charge 82 S&F 150mm long Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all as specified and as directed by Engr-in-Charge 83 M & L for 50mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate), as in plinth protection etc , finished even and smooth w/o using extra cement complete all as specified and as directed by Engr-in-Charge 84 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 85 M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 13014 complete all as specified and as directed by Engr-in-Charge 86 S&F 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and as directed by Engr-in-Charge 87 S&F 30 mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed by Engr-in-Charge 88 S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr-in-Charge 89 S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section. complete all as specified and as directed by Engr-in-Charge 90 Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer complete all as specified and as directed by Engr-in-Charge 91 S&F MS Openable Single Rebate Windows with shutters and grill with following specifications:i. Window Frame and Leaves : Made of Skin Pass Galvanized Iron Sheet (as per IS 513*D* Quality, Galvanized as per IS 277 with Hot Zinc Casting of 120 grams /Sqm and thickness of 0.0006m). With section made of Sheet Thickness 0.008m (22 SWG) of size 0.08m x 0.045mii. Window Shutter : Made of 0.0005m (24 SQG) thick Skin Pass Galvanized Iron Sheet including 4.8mm thick toughened glassiii. Mullion : Made of 0.008m (22SWG) thick skin pass Galvanized Iron Sheet og Size 0.08m x 0.06miv. Finish :Coated with Zinc Phosphate Primer or Thermosetting Polyurethane Paint of Aliphatic Grade providing high levels of scratch resistance and durabilityv. MS Grill : Made of 0.01m square MS bright barsvi. Accessories : SS Pin type Hinges - 1 Set; Polyperopylene Handle - 1 per leaf ; Friction Stay Powder Coated - 1 per leaf; MS powder coated tower bolt - 1 per leaf; (Ethyl Propylene Diamine Monomer (EPDM) used all around glass in shutter for fixing of glass; corner brackets - 4 (made of polypropylene each per shutter and frame)vii. Assembly and installation by the manufacturer.Make : Tata Pravesh (Oyster Windows) / Equivalent 92 Taking down existing roof felt including plaster of any description carefully from existing roof /parapet without disturbing wall surface and removing the same at a distance exc 1.5 Km complete all as specified and as directed. 93 M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in filling in frames, coping, benching at junction of roof and parapet wall finished fair and even complete all as specified and as directed. 94 M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding concrete to maintain slope complete all as specified and as directed. 95 M&L for rendering 15mm thick cement plaster in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturer instruction complete all as specified and as directed. Note:- WPC shall be measured and paid separately under relevant item complete all as specified and as directed by Engr-in-Charge 96 M&L for cleaning of plastered roof surfaces and applying one coat of Cold Bituminous primer for use in waterproofing and damp-proofing treatments @ 0.25 Lit/Sqm confirming to IS:3384-1986 complete all as specified and as directed by Engr-in-Charge 97 Providing and laying APP based polymeric membrane with mineral top finish weighing not less than 3.5 kg/sqm and minimum 3.0 mm thick reinforced with polyester non woven febric( weight not less than 160 gms/sqm) laid by torch application method over bituminous surface & overlap shall be minimum 75mm on longitudinal direction and 100mm on transverse direction complete all as specified and as directed by Engr-in-Charge 98 Supply only Liquid Waterproofing Compound complete all as specified and as directed by Engr-in-Charge 99 M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed by Engr-in-Charge 100 M&L for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed by Engr-in-Charge 101 M&L for Post Construction Anti Termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floorscomplete all as specified and as directed by Engr-in-Charge 102 M&L for Post Construction Anti Termite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron 103 Supply only Metallic floor hardener @5Kg per Sqm of Levelling Course complete all as specified and as directed by Engr-in-Charge 104 M&L for 100 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as IN SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC complete all as specified and as directed by Engr-in-Charge 105 M&L for Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) 40mm thick as in CEMENT CONCRETE IN SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC (Mixed with metallic hardener Note: Metallic Hardener will be measured and paid in relevant item) complete all as specified and as directed by Engr-in-Charge 106 S&F 38mm width Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design complete all as specified and as directed by Engr-in-Charge 107 Dismantling steel rolling shutters complete including shutter, ball bearing, canopy, side guides, locking arrangement etc, height shall be measured from the bottom of the lintel to the finished floor cill level, width shall be measured inclusive of width of the guide rails complete all as specified and as directed by Engr-in-Charge 108 S&F Steel rolling shutters 1.25mm thick , with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:gear operated type with bevel gear box and crank handle 109 S&F Sheet glass 4.8 mm thick, ordinary quality & glazing with oil putty in square but exc 0.5 sq.m in each pane complete all as specified and as directed by Engr-in-Charge 110 Supply only Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engr-in-Charge 111 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soilcomplete all as specified and as directed by Engr-in-Charge 112 M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregates as in Cement concrete in foundations, filling and massconcrete complete all as specified and as directed by Engr-in-Charge 113 Surface dressing n exc 15 cm deep in soft / loose soil complete all as specified and as directed by Engr-in-Charge 114 M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface (broken stone/boulders) complete all as specified and as directed by Engr-in-Charge 115 M&L for 100 mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub-floors, sub-bases, floors, pavings etc complete all as specified and as directed by Engr-in-Charge 116 M&L for 100mm thick Cement concrete type B- 1, 1:2:4 (20mm graded aggregate) finished fair and even without using extra cement as in sub-floors, sub-bases, floors, pavings etc complete all as specified and as directed by Engr-in-Charge 117 M&L Forming Contraction (Dummy) joints 75mm deep x 10mm wide, filled with sealing compound complete all as specified and as directed by Engr-in-Charge 118 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and as directed by Engr-in-Charge 119 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point (soil) complete all as specified and as directed by Engr-in-Charge 120 M&L for brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed by Engr-in-Charge 121 Taking down carefully aluminum/ copper point wiring (light, fan, socket or power) complete (including sunken box) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittingsetc and segregatingserviceable fittings & set aside for reuse in the work and making good to disturbed surfaces of walls, floors, ceilings etc. complete all as specified and as directed. 122 Material & labour for point wiring with 1.5 sq mm (nominal area) FRLS PVC insulated and unseathed 1100 V grade multistanded copper conductor single core cable drawn through and including PVC conduit (medium grade) of adequate size for one light/ fan point controlled by one way switch with all fittings and accessories concealed in walls/floors slabs including PVC insulated and unsheathed single core stranded copper conductor cable green in colour of size 1.5 sq mm green in colour as earth continuity conductor to flush modular metal boxes readily available covers with outer plates/ inner plates etc as per requirement, colour coding as per IE rules complete all as specified and directed for the following :-(a) One light point controlled by one way switch.(Note : Rate of Cutting chasses, making good disturbed surface shall be included in the items.) 123 Supply & fixing Modular metel flush box 4 module including taking down old complete all as specified and directed. 124 Supply & fixing Modular white cover plate with frame 4 module including taking down old complete all as specified and directed. 125 Supply & fixing in repair Modular switch 1 way 6A, 1 module including taking down old complete all as specified and directed. 126 Supply & fixing Ceiling rose 3 Terminal/PVC/ Polycarbonate, isolated body complete all as specified and directed. 127 Material & Labour Sub main wiring with 4 Sqmm (Nominal area) with two runsof single core, PVC insulated, multistranded, unsheathed, copper conductor cables 1100 V grade drawn through PVC conduit in concealed wiring including 1x4 sqmm (nominal area) single core, PVC insulated, multistranded,unsheathed, copper conductoras earth wire and duly connected to earth point complete as specified and directed.(Note : Rate of Cutting chasses, making good disturbed surface shall be included in the items.) 128 Supply & fixing DB Box, in sheet metal enclosure VT DB TPN, MCCB DB TPN 4 way, double door with 160 Amp, 16 KA,TP MCCB as incomer (Vertical type double door, 160 Amps, TP, 16 kAMCCB rate inclusive) and suitable for SP/TP DB in outgoing, enclosure made up of CRCA sheet steel, RAL 9003 powder coated, IP 43, IK 09, As Per IEC 61439-3, with 250 Amp copper bus bar for each phase, with 2 Neutralbar, 2 Earth bar and cable ties for cable management, with fully insulated busbar and shrouded neutral bar, reversible door provision, with colour coded interconnecting wire set, including flushing and fixing DB box in neaty in wall complete all as specified and directed by Engr-in-charge. Make-Legrand Cat Part No. 507745 Model: (Ekinox-3) , MCCB 160 Amp , Model : DPX -3or equivalent inSeimens/ Schinder/ L&TNote : (i) MCCB and DB box shall be of same make. 129 Supply & fixing sheet metal enclosure for MCB, DB, TPN, 415 Volts, 100 amps rated busbar, 4 way Double door enclosure made up of CRCA sheet steel,powder coated, IP 43, including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing withall as specified and directed by Engr-in-charge. 130 Supply & fixing sheet metal enclosure for MCB, DB, SPN, 240 Volts, 100 amps rated busbar, 8 way Double door enclosure made up of CRCA sheet steel, powder coated, IP 43 including fixing the DB box flush in wall of any type and making good the distrubed surface to match asthe existing withall as specified and directed by Engr-in-charge. 131 Material and Labour sheet metal enclosure for double door DBs using MCB 4 way with 200 Amp rated busbar complete all as directed and specified. 132 Supply & fixing MCB TPN/FP63Amps, 10 KA CCurve breaking capacity,including connection with suitable size copper lugs complete all as specified and directed by Engr-In-Charge. 133 Supply and fixing MCB SPN 40 Amps 230 Volt C Curve, 10 KAcomplete all as specified and directed. 134 Supply and fixing MCB SP 6 to 32 Amps 230 Volt C Curve, 10 KA complete all as specified and directed. 135 Supply and fixing LED lights fitting mirror type with high output diffuser 2 feet,1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Supply and fixing LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. 136 Supply & fixing Exhaust Fan, steel body 300 mm sweep, single phase, 230 volt, including blades, frame and louvers, fixing on wall by cutting hole on wall and finishingneat and clean with brick and cement plastering work matching with the existing surface complete all as specified as directed. 137 Material & Labour for point wiring complete with cable PVC insulated, unsheathed, 1100V grade conforming to IS for one way SP, 5A with 1.5 Sqmm of cable of nominal area multistranded copper conductor drawn through and including 20mm PVC conduit including accessories on wall/floor/ceiling (on surface) etc with 16G MS pressed steel terminal box with 2.8 mm thick laminated sheet cover for mounting switch, socket outlet etc complete with all accessories/fittings including PVC insulated continuous muli standred copper earth wire (1.5 Sqmm) and connected to common earth dolly complete for the following :-(a) One light point controlled by one way one switch.Note : (i) Contractor has to make the surface good after flushing the sunken box as existing without any extra cost(ii) Length or wiring 20 mtrs from switch board to be considered as one point wiring. 138 Material & labour for Sub main wiringwith two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, FRLS cable drawn in but including PVC casing capping not less than 25 mm ISI marked includingall accessories ofcasing caping as approved by EIC including PVC insulated unsheathed 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.Note : 2 x 6.0 sqmm + 1 x 6.0 Sqmm earth wirein c PVC conduit of not less than 25 mm combine shall be measured as one unit length in RM 139 Material & labour for Sub main wiringwith Four single core (3 phase) PVC insulated unsheathed cable 1100 volts grade, 10 Sqmm size with multistranded copper conductor, FRLS cable drawn in but including PVC casing caping not less than 40 mm ISI marked includingall accessories ofcasing caping as approved by EIC including one run ofPVC insulated unsheathed 10.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete ( 4 x 10.0 sqmm + 1 x 10.0 Sqmm earth wire). Note : 4 x 10.0 sqmm + 1 x 10.0 Sqmm earth wirein casing caping of not less than 40 mm combine shall be measured as one unit length in RM 140 Material and Labour for sub main wiring using two single core PVC insulated, stranded copper conductor (FRLS) cable of size 4 Sq mm unsheathed drawn in and including PVC caping casing including accessories in surface to wall/floor/ceiling etc and 1x4 Sq mm PVC insulated unsheathed copper conductor as continuous earth continuity conductor drawn in complete all as directed and specified. 141 Supply & fixing LED light fittings (600 mm x 600 mm) recess mounting, LED luminaire 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. 142 Supply & fixing Exhaust Fan, steel body 450 mm sweep, heavy duty single phase, 230 volt, including blades, frame and louvers, fixing on wall by cutting hole on wall and finishingneat and clean with brick and cement plastering work matching with the existing surface complete all as specified as directed. 143 Supply & fixing Wall mounted Air circulator Fans, steel body 450 mm sweep, heavy duty single phase, 230 volt, including blades, fixing on wall by fixing arrangementcomplete all as specified as directed. 144 Supply & fixing in repair LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp including necessary electrical connections by PVC sheathed copper conductor wireof 3 core x 1.5 Sqmm all as directed and specified by Engr-in-Charge. 145 Taking down ceiling/exhaust fan and Hanging or Refixing the same in existing position of any size including provision of suitable flexible cable as required from ceiling rose or connector to fan complete all as specified and directed. 146 Material & labour point wiring with 1.5 Sqmm multi stranded copper conductor 1100 V grade, ISI marked , PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping of 25 mm wide, with double locking type, includingall accessories casing caping as approved by EIC, with PVC 1.5 mm multi stranded insulated unsheathed copper wire, ISI marked of green colour for continous earth, including sunken in cast iron/MS/GI terminal box duly painted with aluminium paint inside and anticorrosive paint out side with 2.8 mm thick bakelite hylam sheet cover, ISI marked with CM/L no. for mounting switch & sockets for the following:-Note : (i) Contractor has to make the surface good after flushing the sunken box as existing without any extra cost(ii) Length or wiring 15 mtrs from switch board to be considered as one point wiring.(iii) Rate of circuit wiring with 3 x 2.5 Sqmmcopper wirefrom DB to switch board is included in unit rate of item. 147 (a) One light/fan/ call bell point controlled by one switch. 148 (b) One 3 pin socket outlet 5 Amps on independent board. 149 (c)One 3 pin socket outlet on same board. 150 All as per Item No. 26 here-in-before but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 2.5 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated,unsheathed onerun multi-stranded copper conductor of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. 151 Material & labour for switch piano flushtype single pole one way 5 Amps complete all as specified and as directed. 152 Material & labour for Switch socket combination 2 in 1, flush type 5/6 Amps complete all as specified and as directed. 153 Material & labour forSwitch socket combined outlet 2 in 1, 3 pin flush type 5 and 15 Amp multi purpose complete all as specified and as directed. 154 Supply and fixing of stepped type electronic fan regulator 100 watt flush type (delux) on the existing hylam laminated sheet etc as required complete all as specified and as directed. 155 Supply & fixing Bell push flush type 5 Amps complete all as specified and directed. Complete all as specified and as directed. 156 Supply and fixing Buzzer, Ding Dong AC 230 volts, single pole complete all as specified and as directed. 157 Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 158 Supply & fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified. 159 Supply & fixing of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified. 160 Supply & fixing LED lamp, AC single phase, 230 volt, 5 Watt complete all as specified. 161 Supply & fixing single pole and neutral enclosure with two pin and earth,plugand socket , suitable for single phase 240 V,complete with one single pole MCB of capacity 20 amps having `C` charactristic, breaking cap 10 KA, including industial plug top, complete all as specified and as directed. 162 Supply, laying, testing and commissioning of LT UG cable, XLPE insulated heavy duty armoured cable of size 35 Sqmm, 3.5 core 1100 V grade, PVC sheathed ,multi stranded aluminiumcable inpipe /trench /cable duct /fixed on wall/truss by proper size shaped GI clamps with nut bolts etc including aluminium lugs at both ends of cable and making good the disturbed surfaces complete all as specified and directed. 163 Supply, laying, testing and commissioning of LT UG cable, XLPE insulated heavy duty armoured cable of size 16 Sqmm, 2 core 1100 V grade, PVC sheathed ,multi stranded aluminiumcable inpipe /trench /cable duct /fixed on wall/truss by proper size shaped GI clamps with nut bolts etc including aluminium lugs at both ends of cable and making good the disturbed surfaces complete all as specified and directed. 164 Excavation in trenches inany type of soil not exceeding 1.5 mtr wide and n.exe 1.5 mtr depth including getting out all as specified and directed. 165 Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soilall as specified and directed. 166 Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting pointall as specified and directed. 167 Material & labour sand filling in-trenches with clean dry sand unwashed including gently pruning around cables complete all as specified and directed by Eng in Charge. Note:-Punned thickness to be measured for payment. 168 Supply & Fixing burnt clay fly ash bricks old size designation 75 (kg/cm2) in trenches on cable as cable protection across the length of the cable (width wise) complete all as specified and as directed. 169 Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised iron lead wire 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15 mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 of size 450 x 450 x 450 mm(with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified and as directed. 170 Supply & fixing in repair Surge protection device Type 1 + 2 maximum dischare current I(max) 50KA, I(imp) 12.5 KA,3P+N (3 Pole & Nuetral) including installation inparallel connection in DBand making all electrical connections with4 x 6.0 Sqmm single core copper wire with copper lugs complete all as specified and directed by Engineer in charge. Make : L&T, Model- AUSP123PN50 or equivalent Make of HAVELLS/ABB. 171 Supply & fixing in repair Surge protection device Type 1 + 2 maximum dischare current I(max) 50KA, I(imp) 12.5 KA,1P+N (1 Pole & Nuetral) including installation inparallel connection in DBand making all electrical connections with4 x 6.0 Sqmm single core copper wire with copper lugs complete all as specified and directed by Engineer in charge. Make : L&T, Model- AUSP121PN50 or equivalent Make of HAVELLS/ABB.
|
