Tenders Are Invited For Tree Planting Works On Some Streets And Sidewalks in Yemen

Work Detail

Tenders are invited for Afforestation Works in some Streets and Sidewalks in Al-Houta District - Lahj Governorate. Water Tanks 2000L HDPE Supply and installation of 1000L three layers HDPE tank with hinged lid, samples should be provided for material and size checking and approval, the tank shall be installed above the base building by using foundations stone 30 cm, reinforcement concrete 6@8/m two ways thickness 15 cm and automatic concrete block dimension of block (15 * 20 * 40) cm around the tank with 160 cm height as drawings. The item include plastering and painting the walls from inside and outside for inlet and outlet 2 valves with a diameter of 2 and 1 inch, and supplying and installing protection tie well-fixed in the tank and connected with the water agriculture network. All works must be implemented according to drawings, specifications, and instructions of the supervisor engineer. Supply and implementation an irrigation network: Supply and Implementation of Polyethylene Pressure Pipe 10 Bar Qatar 3/4 " HPDE according DIN8074-G5 Counter of origin KSA or same quality is attached to the reservoir and extended below the ground level and shall pass and irrigation every basins of afforestation. the price include all drilling, burials, extensions, connections, distillation points, plugs and includes all connections need from water tank to last point as specifications and instructions of the supervisor engineer. Supply and execution of iron protection net around trees Supply and installation of 30 * 30 * 3mm angle iron with a length of 1.5 meters and it is installed (either by welding after installing a piece of iron inside the vortex or by pinning 30 cm deep with cross work of @ 10 iron and 10 cm long) and the dimension is between the iron and the other with no more than 100-55cm c/c and is installed on the entire perimeter of the forging basin. The flanges are interconnected after the installation of the agricultural mesh with simplified iron (40 * 3 sheets) mm from the bottom and top and the medium is fixed with good welding. On the flanges and in the middle on the agricultural net 3 * 3 dots every 25 cm The insurance includes the supply and implementation of a 5mm thick agricultural mesh with a maximum aperture of 5cm and a height of 1.20 m and is installed with good welding with flanges as well as welding and fixing with simplified iron and in accordance with the instructions and directions of the supervising engineer. The work includes all sanding work and the removal of all appendages, bumps and paints in three layers of Bremer against decay and two layers of paint in the required color (paint does not include agricultural mesh). All necessary in accordance with the instructions of the supervising engineer. The contractor must submit the same materials for approval by the supervising engineer prior to supply The work also includes installation and installation of 1 plates every 4 m-2 m (the plates will be delivered ready to the executing contractor and the contractor price includes only installation and installation as instructed by the supervising engineer) Timeline · The contractor will take 10 days to construct required intervention Work, in the targeted village under the supervision of the projects engineer, local authorities, and the project management team. 5. Deliverables (SFCG) expects the following results from the contracting company/companies: Afforestation and preparing the metal fancy according to the specifications and attached table of quantities, including what contributes to protecting the sound and appearance of the environment. 6. Requirements of contractor / construction company(s) The following requirements and experience are expected: · Companies that have brand agencies or certified agents or have relevant experience in construction. · experience with NGOs in construction. · Registered company and have all licenses and bank account 7. Quality Assurance Search-Yemen highly emphasizes on completion of works in accordance with international standards for quality assurance and according to the specifications attached in the specification tables. During the selection process, priority will be given to quality assurance measures. [Disclaimer: The above text is machine translated. For accurate information kindly refer the original document.] Tender Link : https://yemenhr.com/tenders

Contact Information