Request For Quotation Cleaning Equipment For Cleaning And Disinfection Of Premises in Kazakhstan

Work Detail

Durable Aluminum Handle With Ergonomic Handle For Holders And Drives. • The Length Of The Handle Is Not More Than 150 Cm • Composition: Handle – Polypropylene Handle - Welded Aluminum, Outer Diameter No More Than 22 Mm, Inner Diameter 20 Mm • Zone For Holding At Least 18.5 Cm • Weight No More Than 300 G • Withstands At Least 40 Cycles Of Treatment In A Steam Sterilizer At T° 121С (Duration 20 Min) Without Changing The Appearance And Loss Of Consumer Properties • In The Lower Part Of The Handle There Are 2 Upper And 2 Lower Holes Intended For The €-Shaped Retainer Of The Attachment Holder. Hole Diameter Up To 7 Mm. • Suitable For Use With A Simple Trapezoidal Holder For Washing Nozzles 50 Cm, Available From The Customer., Handle Holder 50 Cm Composition: Polypropylene, Galvanized Steel, Synthetic Rubber • The Handle Holder Holds Objects With A Diameter Of 0 To 50 Mm And A Weight Of Up To 10 Kg • Allows Easy And Quick Attachment And Removal Of Accessories With One Hand • The Handle Holder Can Be Used Separately, Without A Wall Frame • The Number Of Handle Fasteners Can Be Determined Individually, Based On Needs (Maximum Number Of Fasteners On One Frame - 6 Pcs.)., Nozzle/Mop For Cleaning The Floor In Common Areas And Ward Departments. It Should Be A Long-Pile Microfiber Washing Nozzle With Two Loops On The Edges For Putting On And Removing From The Holder. It Should Have One Working Surface With Twisted Pile Length In The Range Of No Less Than 5 To 8 Cm. Over The Entire Area Of ​​The Washing Surface For Processing Is Not Less Than 25 Sq.M. Floor Surface, With A Pocket Along The Entire Length Of The Nozzle For Fixing The Cleaning Nozzles On The Holder. At Least 6 Color Indicators Must Be Sewn Into The Field Of View From The Side Of The Lining. Material Of The Washing Surface: Microfiber Polyester Not Less Than 60%, Polyester Not More Than 40%. . Lining And Pocket Material: 100% Polyester. Must Withstand At Least 40 Cycles Of Processing In A Steam Sterilizer In The T°121С, 20 Min Mode, At Least 1000 Washing Cycles In A Washing Machine With A Thermal Disinfection Mode Of At Least 95°С; Must Retain Its Shape Without Deformation, Shrinkage And Shortening Of The Pile, Changes In Longitudinal And Transverse Dimensions And The Initial Volume Of Absorption. Technical Characteristics Of The Nozzle For Washing The Floor: Length 50±1 Cm., Width 12.5±1 Cm.; Dry Weight No More Than 190 G; The Volume Of Absorption Is Not Less Than 500 Ml.; The Free Edges Of The Fabric And Lining Must Be Thermally Treated (Soldered). Information About The Name Of The Nozzle, Washing And Care Rules, Which Should Not Be Erased Until The End Of The Operational Period, Must Be Placed On The Lining Of Each Nozzle; Must Withstand Prolonged Exposure To Detergents And Disinfectants With A Ph In The Range (From 1 To 10)*; It Must Be Approved For Use For Current And Final Disinfection With Therapeutic And Preventive Measures Established On The Basis Of The Instructions For Use. It Must Be Compatible With The Holder Available To The Customer., Napkin With Antibacterial Effect Yellow 38*40 Surfaces In Rooms With An Average Degree Of Pollution. Manipulation, Procedural, Postpartum Wards, Bandages, Newborn Wards, Etc. - Non-Woven Fabric For Wiping And Disinfecting Surfaces Made Of Endless 100% Bicomponent Microfiber. Microfiber - 73% Polyester From Recycled Materials With Silver Nanoparticles Deposited On Silicon Dioxide Nanospheres (Nanomaterial With A Stable Aggregate Structure And Primary Nanoparticles), 27% Polyamide. Intended For Current And General Cleaning In Lpu. Material: Not Less Than 70% Polyester From Recycled Materials With Silver Nanoparticles, Not More Than 30% Polyamide. The Size Of The Napkin Is Not Less Than 35X40 Cm. The Volume Of Absorption Is Not Less Than 90 Ml. It Must Withstand At Least 250 Washing Cycles. It Must Not Discolor, It Must Not Stain Treated Surfaces During The Entire Period Of Operation. It Should Have An Antibacterial Effect Due To The Content Of Silver Nanoparticles. Silver Nanoparticles Must Be Included In The Composition Of The Polymer Deposited On Silicon Dioxide Nanospheres. Should Not Leave Divorces. It Should Be Resistant To Solutions Of Detergents And Disinfectants With A Ph In The Range (From 1 To 10)* During Prolonged Exposure. It Must Have Developed Instructions For Use, Packed In Hermetic Transparent Polymer Bags Of At Least 5 Pcs. In The Package Must Be Aware Of The Customers Cleaning System, Napkin With An Antibacterial Effect Blue 38*40 For Surfaces With The Least Degree Of Biological Contamination. Premises Of Common/Entrance Areas, Wards, Corridors, Offices Of General Functional Purpose - Non-Woven Fabric For Wiping And Disinfecting Surfaces Made Of Endless 100% Bicomponent Microfiber. Microfiber - 73% Polyester From Recycled Materials With Silver Nanoparticles Deposited On Silicon Dioxide Nanospheres (Nanomaterial With Stable Aggregate Structure And Primary Nanoparticles), 27% Polyamide. Intended For Current And General Cleaning In Lpu. Material: Not Less Than 70% Polyester From Recycled Materials With Silver Nanoparticles, Not More Than 30% Polyamide. The Size Of The Napkin Is Not Less Than 35X40 Cm. The Volume Of Absorption Is Not Less Than 90 Ml. It Must Withstand At Least 250 Washing Cycles. It Must Not Discolor, It Must Not Stain Treated Surfaces During The Entire Period Of Operation. It Should Have An Antibacterial Effect Due To The Content Of Silver Nanoparticles. Silver Nanoparticles Must Be Included In The Composition Of The Polymer Deposited On Silicon Dioxide Nanospheres. Should Not Leave Divorces. It Should Be Resistant To Solutions Of Detergents And Disinfectants With A Ph In The Range (From 1 To 10)* During Prolonged Exposure. It Must Have Developed Instructions For Use, Packed In Hermetic Transparent Polymer Bags Of At Least 5 Pcs. In The Package Must Be Aware Of The Customers Cleaning System, Harvesting Trolley. Characteristics At Least: It Allows To Clean Up To 600M2 Before A New Load Of Mops. Composition: Polypropylene, Galvanized Steel. Weight And Dimensions: Approximate Weight Of The Trolley - No More Than 14.85 Kg. , Width Not Less Than 51 Cm. Front Wheels: Diameter At Least 100 Mm On A Hinged Anchor, With Rubber Coating To Reduce The Noise Level. Rear Wheels: Diameter No More Than 185 Mm With A Pedal With A Rubber Coating. Complete Set: 2 Buckets For 6 Liters. Shelf-Holder For A Container And Detergents. 3 Containers For Mops With Color Coding. 3 Lids For Containers For Mops. A Set Of Hooks Of 3 Types, 2 Pcs Each. Cover 70 L For A Garbage Bag. The Ability To Divide The Case Into Two Sections For Collecting Mops And Garbage At The Same Time. A Shelf With 2 Compartments For Small Equipment And Consumables. Cover For A Case. Frame-Holder For The Cleaning Plan. The Area Of ​​The Lower Base Is Not Less Than 0.5 Square Meters. And No More Than 0.55 Square Meters. There Are Mop Holders On The Lower Base., The Lid For The Container For Mops The Lid Is Equipped With Latches Of The Open Position: The Lid Remains Open And Fixed On The Container While The Employee Has Free Access To The Contents. Length No More Than 26±0.5 Cm, Width 21 ±0.5 Cm, Height No More Than 3 Cm. The Lid In The Closed Position Does Not Cover The Color Coding Clip. The Lid Is Attached To The Container By Means Of 2 Plastic Fasteners Located On The Sides. Each Container Requires 2 Lids., The Nozzle For Washing And Disinfecting Floors Should Be A Short-Pile Microfiber Washing Nozzle Of White Color With One Working Surface Consisting Of Two Layers Of Fabric (The Washing Part With Abrasive Inserts And The Lining), For Treatment Of At Least 15 Square Meters. Surfaces Of Walls And Ceilings With A Pocket Along The Entire Length Of The Nozzle For Attaching To The Holder Of Washing Nozzles Available At The Customer (Must Be Compatible). It Must Be Equipped With A Loop For Attaching And Removing Nozzles From The Holder. Material Of The Washing Surface: Not Less Than 90% Polyester Microfiber With Particles Of Silver Ions, Not More Than 10% Polyamide. It Must Withstand At Least 40 Cycles Of Treatment In A Steam Sterilizer At T° Of At Least 121С For A Duration Of At Least 20 Minutes, At Least 1000 Cycles Of Washing In A Washing Machine, It Must Retain Antibacterial Properties, Shape Without Deformation, Shrinkage And Shortening Of Fabric And Pile, And The Initial Volume Of Absorption. Lining Material: 100% Polypropylene. Must Withstand At Least 40 Cycles Of Processing In A Steam Sterilizer At T° Not Less Than 121С For A Duration Of Not Less Than 20 Minutes, Not Less Than 1000 Cycles Of Washing In A Washing Machine Will Retain Their Shape Without Deformation, Shrinkage And Changes In Longitudinal And Transverse Dimensions. • Length No More Than 50 Cm, Width No More Than 15 Cm; • Weight No More Than 90 G. The Maximum Absorption Volume Is Not Less Than 300 Ml; • It Must Have Antibacterial Properties, • 6 Color Indicators Must Be Placed In The Field Of Vision On The Side Of The Lining To Determine The Cleaning Zone • It Must Withstand The Effects Of Detergents And Disinfectants With A Ph Indicator From 1.0 To 10.0;• On The Lining Of Each Nozzle - Information About The Name Of The Nozzle, Washing Rules, Etc Care, Which Should Not Wear Off Until The End Of The Operational Period;• Must Have Developed Instructions For Use, Separator For The Container, An Insert In The Container For Separate Preparation Of Mops And Napkins For Cleaning By The Svep Preliminary Preparation Method, As Well As For Organizing The Storage Of Cleaning Equipment. Must Be Compatible With The Container Available At The Customer., Color-Coded Clips For Buckets And Containers (Yellow) They Are Intended For Fixation On An Aluminum Handle For Cleaning Premises. The Clips Are Color-Coded To Distinguish Cleaning Zones Clips Have The Form Of An Open Ring In The Form Of A Cylinder With Double-Sided Grooves For Fastening To An Aluminum Handle; Clip Material – Polypropylene; The Width Of The Ring Is 23 Mm; Upper Edge Ø 30 Mm; Lower Edge Ø 28 Mm;, Container For Mops With Color Coding Plastic Container Made Of 100% Polypropylene For Storing And Soaking Cleaning Nozzles. Length No More Than 55±0.5 Cm, Width 24 ±0.5 Cm, Height No More Than 21 Cm. The Volume Is Not More Than 25 Liters. Weight No More Than 960G. On The Narrow Side Of The Container From Above There Is A Recess With Grooves For Clips Color-Coded By Cleaning Zones, Only 1 Recess On Each Side. It Is Compatible With The Internal Guides Of The Complex Harvesting Cart Available At The Customer. The Shape Of The Container Makes It Possible To Store Them Without Lids Both Side By Side (Empty) And Side By Side (Full) Without Contact Of The Outer Surfaces Of One Container With The Contents Of The Second Container. On The Inner Side Of The Outer Walls Of The Container (Both For The Convenience Of Work) A Measuring Scale With A Step Of 1 L Is Applied For Accurate Dosing Of Water And Detergents/Disinfectants. Each Container Is Marked With The Brand Name. The Container Has 2 Plastic Handles For Carrying. You Can Prepare Nozzles In The Container: 35-50 Cm - 10 Pcs Or 75 Cm - 8 Pcs., Color-Coded Clips For Buckets And Containers (Red) They Are Intended For Fixation On An Aluminum Handle For Cleaning Premises. The Clips Are Color-Coded To Distinguish Cleaning Zones Clips Have The Form Of An Open Ring In The Form Of A Cylinder With Double-Sided Grooves For Fastening To An Aluminum Handle; Clip Material – Polypropylene; The Width Of The Ring Is 23 Mm; Upper Edge Ø 30 Mm; Lower Edge Ø 28 Mm;, Long-Pile Microfiber Washing Nozzle With A Loop For Putting On And Removing From The Holder. It Must Have One Working Surface For Treatment Of At Least 20 Square Meters, With A Pocket Along The Entire Length Of The Nozzle For Fixing The Washing Nozzles On The Holder (Must Be Compatible). On The Side Of The Lining, 6 Color Indicators Should Be Sewn Into The Field Of Vision To Separate The Cleaning Zones. Material Of The Washing Surface: Not Less Than 70% Polyester (Microfiber), Not More Than 30% Polyamide. Must Withstand At Least 40 Cycles Of Processing In A Steam Sterilizer At T° Not Less Than 121С For A Duration Of Not Less Than 20 Minutes, Not Less Than 2000 Cycles Of Washing In A Washing Machine; Must Retain Antibacterial Properties, Shape Without Deformation, Shrinkage And Shortening Of The Pile, And The Original Volume Of Absorption. Lining And Pocket Material: 100% Polypropylene. It Must Withstand At Least 40 Cycles Of Processing In A Steam Sterilizer At A Temperature Of At Least 121С For A Duration Of At Least 20 Minutes, At Least 2000 Cycles Of Washing In A Washing Machine With A Thermal Disinfection Mode Of At Least 95°С, Retain Their Shape Without Deformation, Shrinkage Of The Fabric And Changes In Longitudinal And Transverse Dimensions. Must Be Compatible With The Holder Available At The Customer. Technical Characteristics: • Length Not Less Than 48 Cm, Width Not Less Than 12 Cm; • Dry Weight No More Than 190 G; • The Volume Of Absorption Is Not Less Than 360 Ml; • Must Have Antibacterial Properties • On The Lining Of The Nozzle - Information About The Name Of The Nozzle, Rules For Washing And Care, Which Should Not Be Erased Until The End Of The Operational Period; • Must Withstand Long-Term Exposure To Detergents And Disinfectants With A Ph Of 1.0 To 10.0;, Napkin With Antibacterial Effect Red 38*40 For Surfaces In Rooms, Sanitary Areas, Bathrooms, Bathrooms, Showers - Non-Woven Cloth For Wiping And Disinfecting Surfaces Made Of Endless 100% Bicomponent Microfiber. Microfiber - 73% Polyester From Recycled Materials With Silver Nanoparticles Deposited On Nanospheres Of Silicon Dioxide (A Nanomaterial With A Stable Aggregate Structure And Primary Nanoparticles), 27% Polyamide. Intended For Current And General Cleaning In Lpu. Material: Not Less Than 70% Polyester From Recycled Materials With Silver Nanoparticles, Not More Than 30% Polyamide. The Size Of The Napkin Is Not Less Than 35X40 Cm. The Volume Of Absorption Is Not Less Than 90 Ml. It Must Withstand At Least 250 Washing Cycles. It Must Not Discolor, It Must Not Stain Treated Surfaces During The Entire Period Of Operation. It Should Have An Antibacterial Effect Due To The Content Of Silver Nanoparticles. Silver Nanoparticles Must Be Included In The Composition Of The Polymer Deposited On Silicon Dioxide Nanospheres. Should Not Leave Divorces. It Should Be Resistant To Solutions Of Detergents And Disinfectants With A Ph In The Range (From 1 To 10)* During Prolonged Exposure. It Must Have Developed Instructions For Use, Packed In Hermetic Transparent Polymer Bags Of At Least 5 Pcs. In The Package Must Be Aware Of The Customers Cleaning System, Measuring Cup For Moistening Mops And Napkins, 2 L, Rubber Screed For Removing Mixed Soiled From Hard Floor Coverings • Composition: Handle – Polypropylene Handle - Anodized Aluminum Blade - Thermoplastic Elastomer • Weight No More Than 295 G • Height Not Less Than 90 Cm • The Length Of The Rubber Blade Is No More Than 36 Cm, The Width Is No More Than 4 Cm • Color: Gray-Blue • The Rubber Blade Does Not Raise Dust And Free Particles Into The Air • The Rubber Blade Protrudes Beyond The Edges Of The Metal Frame To Prevent Damage To Furniture, Walls • The Rubber Blade Is Replaceable And Withstands Processing In A Steam Sterilizer • Must Be Compatible With A Scoop For Collecting Large Dry Garbage By Attaching It To The Scoop Handle, The Holder For Washing Nozzles 50 Cm Simple Should Be Trapezoidal In Shape With A V-Shaped Cutout On The Long Side In The Area Of ​​The Handle Attachment, Allowing The Holder To Be Turned Relative To The Longitudinal Axis At An Angle Of At Least 270 Degrees, With Rectangular Holes At The Edges And With At Least 2 Rubber Latches For Non-Contact Nozzle Changes. The End Faces Must Be Spring-Loaded. Holder Width 10±2. The Length Of The Holder Along The Narrow Part Is 40±2.5 Cm. And 45±2.5 Cm Across The Widest Part. When Putting On The Nozzle, The Size Of The Holder Should Be Reduced Due To The Spring-Loaded Sides By At Least 4 Cm From The Original Size. Weight No More Than 300 G. It Must Withstand At Least 80 Cycles Of Processing In A Steam Sterilizer In The T°134C, 10 Min Mode Without Changing Its Appearance And Losing Its Consumer Properties. Must Be Equipped With A Retainer And A Locking Ring. It Should Be Allowed To Be Used For Current And Final Disinfection With Therapeutic And Preventive Measures Established On The Basis Of The Instructions For Use Issued By The Authorized Body. Must Be Compatible With Telecopier Pen. Available To The Customer., The Telescopic Handle Should Be Designed For Use With A Simple Trapezoidal Holder For Washing Nozzles Available From The Customer. The Length Of The Handle In The Assembled State Is No More Than 100 Cm, In Working Condition No Less Than 180 Cm, The Outer Diameter Is No Less Than 20 Mm. Weight No More Than 500 G. The Length Of The Upper Handle Holding Zone Is Not Less Than 15 Cm, The Middle One Is Not Less Than 40 Cm. Composition: Handle - Thermoplastic Elastomer And Polypropylene, Pipe - Welded Aluminum. The Set Should Include 4 Color Rings. It Must Withstand At Least 80 Cycles Of Processing In A Steam Sterilizer In The T°121С, 20 Min Mode Without Changing Its Appearance And Losing Its Consumer Properties. In The Lower Part Of The Handle, There Should Be 2 Upper And 2 Lower Holes Intended For The Attachment Of The Nozzle Holder. The Hole Diameter Is 7±0.2 Mm. It Must Be Allowed To Be Used For Current And Final Disinfection With Therapeutic And Preventive Measures Established On The Basis Of The Instructions For Use, Color-Coded Clips For Buckets And Containers (Green) They Are Intended For Fixation On An Aluminum Handle For Cleaning Premises. The Clips Are Color-Coded To Distinguish Cleaning Zones Clips Have The Form Of An Open Ring In The Form Of A Cylinder With Double-Sided Grooves For Fastening To An Aluminum Handle; Clip Material – Polypropylene; The Width Of The Ring Is 23 Mm; Upper Edge Ø 30 Mm; Lower Edge Ø 28 Mm;, Color-Coded Clips For Buckets And Containers (Blue) They Are Intended For Fixation On An Aluminum Handle For Cleaning Premises. The Clips Are Color-Coded To Distinguish Cleaning Zones Clips Have The Form Of An Open Ring In The Form Of A Cylinder With Double-Sided Grooves For Fastening To An Aluminum Handle; Clip Material – Polypropylene; The Width Of The Ring Is 23 Mm; Upper Edge Ø 30 Mm; Lower Edge Ø 28 Mm;, Wall Frame 30 Cm• Composition: Aluminum, Synthetic Rubber • The Number Of Handle Retainers Can Be Determined Individually, Based On Needs (Maximum Number Of Fasteners On One Frame - 6 Pcs.). • The Frame Is Attached To The Wall With Two Self-Tapping Screws • The Frame Mounting Height Is Not Less Than 120 Cm From The Floor • Lateral Grooves Are Closed With Red Silicone Pads After Inserting The Required Number Of Handle Retainers, Scoop For Collecting Large Dry Debris • Composition: Handle - Polypropylene, Handle - Aluminum, Base - Stainless Steel • Weight No More Than 710 G • Height No More Than 86 Cm Along The Handle • The Width Of The Scoop Bulb Is Not Less Than 29 Cm • Color: Gray-Blue • Durability: If Necessary, The Scoop Can Be Fixed And Used Outdoors Position • Mobile Hook For Attaching The Scoop To The Cart • Fastening For The Drive Available At The Customer

Contact Information