|
Construction work till the marriage hall near Shankar ji's temple in village Mahuari - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil (D.S.R 2.6.1) 2 Providin of Laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). (D.S.R 4.1.8) 3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.1.2) 4 Same as above in item No 3 but forbeam,roofs, lintel band & etc above plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (D.S.R.5.2.2) 5 Same as above in item No 4 but for Column as per 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)(D.S.R.5.2.2) 6 Steel Reinforcement for R.C.C work includingcutting,straightening, bending, binding and placing in position & including complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. (D.S.R.5.22.6) 7 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) (D.S.R.6.1.2) 8 Same as above in item No 10 but in super structure for wall of one brick thickness Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)(D.S.R.6.4.2) 9 12 mm thick plaster with 1:6 cement and coarse sand morter on brick work including ranking and joint washing and cleaning and including supply of allmaterials labour and T&P etc. required for proper completion of work. (D.S.R.13.4.2) 10 Same as above in item No 12 but for plaster on rough face .(D.S.R.13.5.2) 11 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete (D.S.R.10.25.1) 12 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (D.S.R.9.21) 13 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift.(D.S.R.2.25) 14 Supplying and filling in plinth withsand under floors, including watering, ramming, consolidating and dressing complete.(D.S.R.2.27) 15 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm As per (D.S.R 11.41.2) 16 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade.New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (D.S.R.13.47.1) 17 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than50 gram/litre (D.S.R.13.41.1) 18 Finishing with Deluxe Multi Surface Paint .for interiarior or exterior using primer as per manufactures specification. Painting wood work with deluxe multi Multi Surface Paint required shade. to ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (D.S.R.13.48.2) 19 Supply and fixing of sign board made of M.S angle iron including supply and cost of all material, labour T&P required templet as directed by the Engineer Incharge. 20 Wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq.mmFRLSPVCinsulatedcopperconductorsinglecorecablein surface/recessedmediumclassPVCconduit,withmodularswitch, modularplate, suitable GI box and earthing the point with1.5 sq.mm FRLSPVCinsulatedcopperconductorsinglecorecableetc.as required. 21 Wiringforlight/powerplugwith2X4sq.mmFRLSPVCinsulated copper conductor single core cable in surface/ recessed medium class PVCconduitalongwith1No.4sq.mmFRLSPVCinsulatedcopper conductor single core cable for loop earthing as required. Power plug wiring in PVC conduit (4x4 sq.mm.) DSR NO. 1.12 22 Wiring for circuit/ submain wiring alongwith earth wire with the following sizesofFRLSPVCinsulatedcopperconductor,singlecorecablein surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire DSR NO. 1.14.1 23 Wiring for circuit/ submain wiring alongwith earth wire with the following sizesofFRLSPVCinsulatedcopperconductor,singlecorecablein surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR NO. 1.14.2 24 Supplyingandfixingfollowingmodularswitch/socketontheexisting modular plate & switch box including connections but excluding modularplate etc. as required. 5/6 A switch DSR NO. 1.24.1 25 Supplyingandfixingfollowingmodularswitch/socketontheexisting modular plate & switch box including connections but excluding modularplate etc. as required.15/16 A switch DSR NO. 1.24.3 26 Supplying and fixing two module stepped type electronic fan regulator ontheexistingmodularplateswitchboxincludingconnectionsbut excluding modular plate etc. as required. DSR NO. 1.25 27 Installation, testingandcommissioningofceilingfan,includingwiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing andfixingphenoliclaminatedsheetcoveronthefanboxetc.as required. DSR NO. 1.25 28 Supplyingandfixingof followingwayssurface/recessmounting, vertical type, 415 V, TPN MCB distribution boardofsheetsteel, dust protected,duly powderpainted,inclusiveof200A tinnedcopperbus bar,commonneutrallink,earthbar,dinbarformountingMCBs(but withoutMCBsandincomer)as required.(Note:Verticaltype MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door. DSR NO. 2.5.1 29 SupplyandCeilingfanwithfanmotorofACpermanentinsulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 and also complywithIS:1709/1984withlatestamendment.Theratedvoltage 220/240 volt 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball breaing system. DSR NO. 19.1 30 GST @ 18%
|
