|
Tender For Special Repair To Bldg No P-116A (Cook House) At Mil Stn Ahmedabad Under Ge (A) Ahmedabad; 1 Excavating in trenches in Hard / dense / soft soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation of poles, trenches for laying of cable, etc. and getting out complete all as specified and directed. 2 Removing excavated material to a distance not exceeding 50 Mtr and deposting where directed at a level not exc. 1.5 mtr above the starting point. 3 Returing filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each all as required and directed. 4 Taking down chowkats or frame with shutters ( without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed. 5 Taking down chowkats or frame with shutters(without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed. 6 Supply & Fixingfactory made 35 mm flush shutter, solid coare construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. 7 Supply & Fixing factory made35 mm thick2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash members, any numbers and mited beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20(a) supplied and fitted to chowkats 8 Supply & Fixing mild steel angle iron work as in doors frames, conforming to Fe-410-0 also testing and complete. 9 Supply & Fixing for Powder coatedaluminium ventilator having frame of Section 57x52 ,Series -B 20535 andshutters, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 no.).complete all as specifiedcomplete all as specified and as directed. 10 Supply & Fixing Stainless steel wire cloth 0.36mm normal dia of wire and average width of aparture 1.40mm and fixed with tinned tacks or galvanised wire stapples complete all as specified and directed. 11 Supply & Fixing butt hinges medium weight 100mm long complete all as specified and directed. 12 Supply & Fixing 100mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black 13 Material & Labour for 150mm long extructed aluminium handle fabricated type complete all as specified and directed. 14 Supply & Fixing Aluminium anodised barrel tower bolt of extruded section 200 mm sizecomplete all as specified and directed. 15 Supply & Fixing aluminium alloy 300mm anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed. 16 Material & Labour Preparation of Newsurfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying Twocoat of synthetic enamel paint,incl one coatPrimer complete all as specified and directed. 17 Demolition of plaincement concrete unreinforced in ground floor and paving above or below any thickness etc complete all as directed. 18 Material & Labour PCC type C-2 Mix 1:3:6 (40mm graded stone aggregate), 75mm thick in plinth protection/path finishing the surface even and smooth without using extra cement with joints filled with bitumen grade 85/ 25 and sand in equal proportionsby weight complete all as specified and directed. 19 Demoltionwall and ceiling boards any thickness including cover fillets etc. complete all as specified and directed. 20 Supply & Fixing anodise aluminumsnap grid frame work 605mm x 605mm consists of Main Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 605mm centre to centre to form a grid of 605mm x 605mm and wall angle 25mm x 25mm x 2mm fixed to wall perimetrs at 450mm centres and shall confirm to IS 733, IS 1285 with and including hangers of 3mm dia. G.I. (upto 1200mm length and 1200mm centres) adjusting level fixed to roof steel members by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long etc complete all as directed. 21 Material & Labour for 4mm thick non asbestos fibre cement decorative building boards of approved design laid/ inserted to Aluminium framework etc complete all as directed. 22 Dismantling asbestos cement(corrugated or semi corrugated, etc) sheets in roof covering complete all as specified. 23 Supply & Fixing prepainted galvalume aluminium zinc coating GI base corrugated steel sheet 0.60 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as specified and directed.(Note : Corrugation shape and colour of sheet shall be approvedby GE) 24 Supply & Fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.60mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified as specified 25 Dismantling wrought iron or mild steel work of any description not oth-erwise provided for. 26 Material & LabourRolled steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connectiong plates complete including cutting, grinding, welding etcFe-290 (Gde E-165) as required complete all as specified.and directed. 27 Material & Labour for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 28 Material & Labour Preparation of old or previously treated steel surfaces of any description not other wise described, over 10cm width or girth and applying one coat ofsynthetic enamel paint, complete all as specified. 29 Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar. 30 Material & Labour machine cut Kota stone slab 18 to 20 mm thick as in flooring or trades of step incl half round moulding over and including screed bed 15 mm thick in CM (1:6) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified. 31 Material & Labour machine cut Kota stone slab 18 to 20 mm thick as in riser to step/skirting including 10 mm thick rendringin CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified. 32 Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 33 Material & Labour for Non Skid ceramic colouredtiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.06 Sqm but n. exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 all as specified. 34 Material & Labour for Glazed ceramic tiles coloured (300x450mm) x 7mm thick, on wall dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified 35 Material & Labour for 25mm thick PCC (1:2:4) type B0using 12.5mm graded stone agg as in levelling course finished even and fair complete all as specified and directed. 36 Demolition ofBrick work or stone/boulder masonry, built in cementmortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. 37 Material & Labour for brick work with sub class B bricks built in CM (1:6) straight orcurved on plan & exc 6 m mean radius with old size bricks complete all as specified and directed. 38 Material & Labour brick work with sub class Bbrick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1.4 exc 6m mean radius completeall as specified and directed. 39 Taking up or downof 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. 40 Taking up or down of 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and directed. 41 Supply & Fixing 15mm bore tubes, `medium grade, galvanised, with all fittings and fixed complete concealedto walls and ceilings or laid in floors complete all as specified and directed. 42 Supply & Fixing 20mm bore tubes, `medium grade, galvanised, with all fittings and fixed complete concealed to walls and ceilings or laid in floors complete all as specified and directed. 43 Cutting chase, pinning in making good to facing where required and pointing in CM 1:3 to end or edges of landing steps, cills, sunshades, shelves, lintels etc. and cutting chase for conceled water pipe etc. and making good cutting not exc 10Cm girth on Brick walls. 44 Dismantling of water tanks exc 500 & n exc 1000 ltr capacity & removing to store all as directed by the Engr-in-Charge. 45 Supply & Fixing rotational moulded PVC water storage tank cylinderical, vertical with closed top of 1000 ltrs capacity, hoisted and fixed in position with and including PTMT float valve 20mm dia and making connections for inlet and outlet complete all as specified and directed. 46 Supply & Fixing in repairstop cock 15mm cast copper alloy,screwed down,withchromium plated fancy typehigh pressure screwed both ends for iron pipe or for union complete all as specified and directed. 47 Supply & Fixing in repairstop cock 15mm (Concealed type) cast copper alloy,screwed down,withchromium plated fancy typehigh pressure screwed both ends for iron pipe or for union complete all as specified and directed. 48 Supply & Fixing in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. 49 Supply & Fixing in repair Pillar taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed. 50 Supply & Fixing in repair vitreous china wash basin, white flat back screwed down for iron pipewaste pipe, brackets and cutting for and pinning in ends of brackets or errecting stand but excl taps, chain and plug complete all as specified and directed. 51 Supply & Fixing 40mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm 45gms/40mm-60 gms including nut washer cup bracket complete all as specified and directed 52 Supply & Fixing in repair PVC connection 600mm long of dia 15mm complete complete all as specified and directed. 53 Supply & Fixing in repair 650mmX400mm size bevelled edge mirror of selected quality glass 5mm to 5.5mm thick mounted on 6mm AC building board or commercial ply wood and plastic framing fixed to plugs with CP brass screws and cup wahsers complete all as specified and directed. 54 Material & Labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement 55 Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed . 56 Material & labourfor 15mm thick rendering on than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement. 57 Material & labourfor 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with water proofing compound.( Note-Water proofing compound should bemesured and paid separately ) 58 Material & Labour for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smoothwithout using extra cement. 59 Supply only water proofing compound etc. all as specified and directed. 60 Material & Labour newlyplastered or un plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying cement based wall care putty 1.5mm thick to wall surface complete all as specified and directed. 61 Material & Labour for preparation of new plastered surfaces on wallsand applying two coats of cement based paint over alkali resistant primer etc.Complete all as specified and directed. 62 Material & Labour for preparation new surface of ceiling and applying three coat of white wash complete all as specified and directed. 63 Material & Labour for complete removal of existing treatment and applying two coats of oil bound distemper over 1.5mm average thk wall care putty& alkali resistant priming paint walls complete. 64 Material & Labour for complete removal of existing treatment and applying two coats cement based paint on over over alkali resistant primer etc on walls complete all as specified and directed. 65 Material & Labour for complete removal of existing treatment of old decorated surface of ceiling and applying three coat of white wash complete all as specified and directed. 66 Supply & Fixing in repairs 25 mm dia fancy type drapary curtain rods with and including suitable fancy type brackets to both ends as required fixed in repair complete all as spd and directed. 67 Supply and fixed in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed. 68 Taking down of existing un-serviceable water proofing treatment , taking down cement plaster etc, of any description and claening of top surfaces of cement concrete flushing out junction of parapet walls and washing down with water complete all as specified and directed. 69 Material & Labour for water proofing treatment to non accessible RCC roofs by providing 10mm in CM 1:3 using 100% course sand on roof incl WPC 3% by weight of cement & applying one coat of bituminous primer @ 0.4 ltr/sqmand allow to dry applying one coat of hot blown bitumen grade 85/25@ 1.2 kg/Sqm,Supply and laying polymeric water proofing membrane weight not less than 3kg/sqmand and minimum 3mm thick reinforced with polyster non wove fabric(wt not less than 150gms/sqm) land onprimed surface by forced application andapplying a coat of alumunium paint, complete all as specified and directed. 70 Supply & Fixing powder coated anodised Aluminium door frame of size 100x44x1.98 mm thick with one or more rebates and shutters pull and push type or side gung type (with or without aluminium sash bars) comprising of top & lock rais of section 115x44x1.98 mm thick,botttom rail of section 150x44x1.98mm thcik and stiles of section 85x44x1.98mm thick including necessary jointing cleat,glazin clip,rubber packing anodized alumimium beading,screws,anodized aluminium fitting such as foor spring or hinges 100mm size with hydrolic door closer,hnadles D type 125 mm ,floor door stoppers,tower bolt 200mm ,sliding door bolt 300mm or mortice lock,hydraulic door closer with 5mm tinted glass,prelaminated particle board(Vovapan) panel and making good of wall surface to match existing surface complet all as specified and directed. 71 Supply & Fixing aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track using powder coated aluminium sections or approved make, with or without sash bars, suitable for 4.00 mm thick glazing and stainless steel alloy wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangements, frame of window should be of 1.5 mm thick section & shutter sec like handle/interlocking/top/bottom should be of 1.2 mm thick etc , completeall as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, joining, cleats, glazing clips, aluminium snap beading, locking arrangements, handleetc complete all as specified and directed. 72 Material & Labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3) complete all as specified. 73 Taking down carefully surface aluminium or copper point wiring with PVC casing-caping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfacescomplete. 74 Point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenoliclaminated white sheet cover for mounting switches, sockets, fan regulators complete for the following :- 75 (a) One light point controlled by one switch. 76 (b) One fan point controlled by one switch. 77 (c) One socket outlet 6 amp controlled by one switch on the same board with other switches. 78 (d) One socket outlet 6 amp controlled by one switch on indepdendent board. 79 Point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete. 80 Supply & Fixing switch piano flush button single pole one way 6 amp complete. 81 Supply & Fixing switch piano flush button single pole one way 16 amp complete. 82 Supply & Fixing socket outlet2 in 1, 3 pin 6 & 16 amp flush type complete. 83 Supply & Fixing socket outlet3 pin, 6 amp, flush type complete. 84 Supply & Fixing hum freeelectronic step fan regulator 120 - 280 volts of 100 watt capacity including connecting upcomplete. 85 Supply & Fixing ceiling rose 6 amp, 3 plates polycarbonate body complete. 86 Material & Labour for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green)drawing into andincluding concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories of following nominal sizes:- 87 (a) 2x4 sqmm + 1x4 sqmm earth continuity conductor in 20 mm dia conduit.. 88 (b) 2x6 sqmm + 1x6 sqmm earth continuity conductor in 20 mm dia conduit.. 89 Supply & Fixing LED batten (1.2 m) made of PVC housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 100+ lumens per watt and total power consumption not less than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95complete. Make : Philips cat ref no. ENDURALED BATTEN BN 108C LED 20S PSU CDL WH or any equivalentas approved. 90 Material & Labour for earthing complete with galvanized steel earth plate electrode 60cmX60cmX6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel includingPCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-5 of SSR Part-I. all specified 91 Supply & Fixing MCB distribution board SPN, 240 volts, 8 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. 92 Supply & Fixing LED 20W streetlight made up of pressure die cast housing with prismatic polycarbonate diffuser and individual LEDs with secondary optics and IP65 protection complete with fixing arrangement and connections as directed 93 Supply & Fixing MCB distribution board ETPN, 415 volts, 4 ways powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. 94 Supply & Fixing In repair energy efficient recessed mounted LED luminaries suitable for for 2x2 grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm, warm white ,3000K ,color PVC insulated & sheathed three core flexible multistranded copper conductor cable, complete all as specified and directed. 95 Supply & Fixing distribution board iron clad, double door with IP-43 IK-09 protection suitablefor MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 160 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB, taking downexisting unsvDB and making good the disturbed wall surface all as required at site or directed by Engr-in-Charge 96 Supply & Fixing MCBs as per load requirementC series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of following ratings:- 97 (a) Single pole 6 to 16 amp. Make - Legrand DX3 cat ref no. 408587 to 408592 or equivalent in any other make as approved. 98 (b) Double pole 32 amp. Make - Legrand DX3 cat ref no. 408636 or equivalent in any othe make as approved. 99 (C) Four pole 63 amp. Make-Legrand cat ref no. 408702 or equivalent in Schneider or Hager as approved. 100 Taking down carefully aluminium or copper submain wiring with PVC surface conduit or casing caping and making good disturbed surfaces complete. 101 Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete. 102 Supply & Fixing Power unit for AC or geyser 3.5 KW 4 module including sunken modular GI metal boxes not less than 1.2 mm thick and white modular mounting plates with frame all as approved. 103 Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm4 core. 104 Supply and laying DWC(Double wall corrugated) HDPE pipe,ISI marked,IS 16205(part 24):2017 part 2 of outer dia 50 mm and inner dia 38 mmwith smooth internal and profiled external surface for non pressure underground cable including all connected acceseries like coupler,o-ring etc complete all as specified and directed Make : Rex Polyextrusion/Gemini/Astral/or any equivalent make
|
