Tenders Are Invited For Construction Of A Pedestrian Road Along The District Road No. 2338C Żnin - Gąsawa - ... in Poland

Work Detail

The Scope Of The Task Includes The Construction Of A Pedestrian Road Along The District Road No. 2338C Żnin - Gąsawa - Ryszewo And No. 2342C Wenecja - Dąbrowa In The Town Of Wenecja. The Investment In Question Is Located In The Kuyavian-Pomeranian Voivodeship, In The Żnin Poviat, In The Town Of Wenecja And Will Be Implemented In As Part Of The Reconstruction Of District Roads No. 2338C And No. 2342C In The Existing Ones Demarcation Linesthe Investment Task Includes:• Construction Of A Pedestrian Road With A Concrete Pavement Surface,• Reconstruction And Construction Of Exits,• Desilting Of Ditches And Cleaning Of Existing Drainage Devices,• Renovation Of The 1.0 M Wide Surface At The Curbpedestrian Roads Along The District Road No. 2338C Żnin - Gąsawa - Ryszewothe Pedestrian Road Will Be Located On The Right Side Of The District Road From Km 4+137.00 (Working 0+000) To Km 4+351.39 (Km 0+214.39) In The City Of Venice. The Pedestrian Route Will Be 1.8 M Wide And Will Be Made Of Phased Concrete Cubes With Dimensions. 10X20 Cm And Thickness 6 Cm On A Cement-Sand Ballast (1:4) Thick. 5 Cm And A Cutting Layer Of Thickness. 15 Cm After Compaction With C1.5/2.0 Stabilization. Along The Designed Pedestrian Road, A 2% Transverse Slope Was Used Towards The Road, And The Longitudinal Slope Was Adjusted To The Condition Of The Existing District Road. The Technical Design Assumes Framing The Pedestrian Road From The Road With A Concrete Curb With Dimensions. 15X30x100 Cm Protruding 12 Cm Above The Road, Placed On A Concrete Footing With C12/15 Concrete Support And On The Side Of The Roadside With A Concrete Edge Of Dimensions. 8X25x100 Placed On A Concrete Bench With C12/15 Concrete Support. Concrete Cubes Should Be Mostly Gray In Color, Only Along The Entire Length. (At The Curb) The Project Assumes Laying Red Concrete Cubes On A Width Of 20 Cm (Two Rows). Situational Solutions In The Design Documentation Take Into Account The Existing Development Of The Road Lane (Property Boundaries), Minimizing The Scope Earthworks. Accessibility Of Adjacent Properties To The District Road Was Maintained Through Existing Exits And Newly Designed Individual Exits (Usually). The Widths Of The Exits And Their Location Were Adapted To The Existing Gates. The Newly Designed Exits Should Be Made Of Phased Concrete Cubes With Dimensions. 10X20 Cm And Thickness 8 Cm Of Red Color, Placed On A Cement-Sand Ballast (1: 4) Thick. 5 Cm, On A Concrete Base Made Of C12/15 Concrete, Thickness. 15 Cm And A Cutting Layer Of C1.5/2.0 Stabilization And Thickness. 10 Cm After Compaction. The Designed Exits Should Be Framed With A Concrete Retainer With Dimensions Of 12X25x100 Cm Placed On A Concrete Bench With C12/15 Concrete Support And A Curb (On The Road Side) With Dimensions. 15X22x100 Cm Placed On A Concrete Bench With C12/15 Concrete Support, Protruding 2 Cm Above The Road Surface. At The Exits, A Longitudinal Slope Of 2% Was Assumed On The Width Of The Sidewalk, And The Remaining Section

Contact Information