|
Cpos/Cdhu 02.02.150 - Lease Of Deposit Type Container - Minimum Area Of 13.80 M², Orse 11703 - Open Shed To Support Production (Carpentry, Armature Center, Workshop, Etc.) With Scissors, 4Mm Tile, Floor In Unpolluted Concrete, Orse 4656 - Container Rental - Bathroom With Showers And Vases - 4.30 , For 1 Meter - Supply And Installation (Exclusive Hydrometer). Af_03/2024, Sinapi 95673 - Hydrometer Dn 1/2, 1.5 M3/H - Supply And Installation. Af_03/2024, Sinapi 101509 - Electricity Input, Overhead, Three-Phase, With Embedded Box, 10 Mm2 Cable And Din 50A Circuit Breaker (Concrete Post Not Included). Af_07/2020_Ps, Sinapi 103689 - Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Cpos/Cdhu 05.07.040 - Removal Of Separated Construction Debris Using A Metal Bucket - Earth, Masonry, Concrete, Mortar, Wood, Paper, Plastic Or Metal, Sinapi 98459 - Siding With Metal Tile. Af_03/2024, Sinapi 93565 - Junior Construction Civil Engineer With Additional Charges, Own Cpu 2287 - Mobilization And Demobilization Of Work In Urban Center Or Bordering Region With A Value Between 1,000,000.01 And 3,000,000.00 (0.30% ), Own Cpu 1926 - Rental Of Facade Type Metal Scaffolding, Pieces Approximately 1.20 M Wide And 2.0 M High, Including Diagonals In X, Connection Bars, Shoes And Other Items Required For Assembly, Including Assembly And Disassembly, Sinapi 99059 - Rental Conventional Construction, Using Jig Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Sinapi 90100 - Mechanized Trench Excavation With Prof. Up To 1.5 M (Average Upstream And Downstream/One Composition Per Section), Backexcavation. (0.26 M3), Width. From 0.8 M To 1.5 M, On 1St Category Soil, In Locations With A High Level Of Interference. Af_02/2021, Sinapi 93358 - Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.30 M. Af_02/2021, Sinapi 100324 - Ballast With Granular Material (Crushed Stone N.1 And Crushed Stone N.2), Applied On Floors Or Slabs On Ground, Thickness Of *10 Cm*. Af_01/2024, Sinapi 96534 - Manufacture, Assembly And Disassembly Of Formwork For Crowning Block, In Sawn Wood, E=25 Mm, 4 Uses. Af_01/2024, Sinapi 96543 - Block Frame Using 5 Mm Ca-60 Steel - Assembly. Af_01/2024, Sinapi 96544 - Block Frame Using 6.3 Mm Ca-50 Steel - Assembly. Af_01/2024, Sinapi 96545 - Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Sinapi 96546 - Block Frame Using 10 Mm Ca-50 Steel - Assembly. Af_01/2024, Sinapi 104920 - Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Sinapi 104921 - Block Frame, Baldrame Beam And Running Shoe Using 16 Mm Ca-50 Steel - Assembly. Af_01/2024, Sinapi 96557 - Concreting Of Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using A Pump - Laying, Thinning And Finishing. Af_01/2024, Sinapi 100574 - Spreading Material With Crawler Tractor. Af_11/2019, Sinapi 93382 - Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Sinapi 98557 - Surface Waterproofing With Asphalt Emulsion, 2 Coats Af_09/2023, Sbc 128 - Technological Control Of Concretes, Sinapi 92423 - Assembly And Disassembly
|
