|
Tender For Provision Of Toilets In Firing Rg At 3 Mtr Margao Goa.; 1 Excavation in trenches not exceeding 1.5m wide & not exceeding 1.5m in depth for foundation etc.and getting out in soft disintegrated rock complete all as specified and directed. 2 Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation laying of pipe line etc and getting out in hard/dense soil complete all as specified and as directed. 3 Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for laying of cables and gettingout complete all as specified and as directed. 4 Returning filling in including spreading levelling watering and well ramming in layer not exceeding 25cm complete all as specified and directed. 5 Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting pointcomplete all as specified and directed. 6 Material and Labour for PCC 1:4:8 (type D2) using 40mm graded aggregate as in foundation complete all as specified and directed. 7 Material and Labour For Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in C M 1:4 complete all as specified and directed. 8 Material and Labour for brick work with fly ash bricks straight or covered on plan to any radius in half brickwalls in built in CM 1:4 complete all as specified and directed. 9 Material and Labour for PCC 1:2:4 type B1 (20 mm gradedaggregate) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto1.5m clear span,cills,steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering,slightly rounded or chamfered angles and throating complete all as specified and directed. 10 Material and Labour rendering 15 mm thickon stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:6without using extra cement complete all as specified and directed. 11 Material and Labour rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 without using extra cement with using water proofing compound complete all as specified and directed.Note :- Water proofing compound will be measered separately. 12 Supply only integral waterproofing compound complete all as specified and directed. 13 Material and Labour for two coat of oil bound distemper over 3 mm thick wall care puttyon plastered surfaces ofwalls including prepartion of new/old surfaces complete all as specified and directed. 14 Material and Labour for preparation of new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489-2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over 3mm wall care putty on new surface completeall as specified and directed. 15 Material and Labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs etc. not exceeding 200mm thick rough finished surfaces of finished concrete complete all as specified and directed. 16 Material and labour for RCC 1:2:4 typeB-I using 20 mm graded stone aggregate as in slabs, supported on walls, landings, balconies,shelves and the like complete all as specified and directed. 17 Supply and fix TMT bars 10 mm dia and over, cut to length, bend to shape including cranking, hooping etc. and binding with ms wire (annealed) not less than 0.9 mm dia complete all as specified and directed. 18 All as per above Item No but for6 mm to 8 mm dia. 19 Material and Labour Moorum/red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. 20 Material and Labour Hard core of guage not exceeding 63 mm , deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface of broken stone or boulders complete all as specified and directed. 21 Material and Labour 75mm thick PCC 1:4:8 type D-2(using 40 mm graded aggregate) as in sub base under flooring complete all as specified and directed. 22 Material and Labour for 50mm thick PCC 1:3:6 type C-1 as in plinth protection complete all as specified and directed. 23 Material and Labour coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cementslurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM 1:6 complete all as specified and directed. 24 Material and Labour glazed ceramic coloured designer pattern tiles 450mmx 300mmx7mm thick on vertical surface such as skirt, Dado etc set and jointed in white colour cement including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed. 25 Material and Labour cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc. complete all as specified and directed. 26 Material and Labour Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:6 cement mortar complete all as specified and directed. 27 Supply and fix solid PVC door frames of size 50mm x 47 mm made out of 5 mm thick plain/printed coloured PVC sheet reinforced with MS square tube complete all as specified and directed. 28 Factory made solid PVC moulded Door shutter, 28 to 30 mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded coloured PVC sheet on front face & 2mm plane colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with particle board core. 29 Supply and fix 125 mm aluminium handles,cast type anodised complete all as specified and directed. 30 Supply and fix 100mm butt hinges for windows medium weight,cold rolled mild steel and fixed complete all as specified and directed. 31 Supply and fixAluminium anodised barrel tower bolts150mm for door of extruded section and fixed complete all as specified and directed. 32 Supply and fix for Power coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 33 Supply and fix Power coated aluminium window and ventilator shutters fixed, openable or sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. 34 Supply and fix Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples as repair complete all as specified and directed. 35 Supply and fix Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automaticshing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. 36 Supply and fix 4 mm thick plain sheet glass ordinary quality fix with bead in squaresnot exceeding 0.5 Sqm in each pane complete all as specified and directed. 37 Supply and fix rolled mild steel Fe 410-W (Gde-E-250 quality A) in joist, channel, angle, or tee sections, fixed independently as in rafter and purlins without connecting plates, etc. complete all as specified and directed. 38 Material and Labour for preparation of new steel Surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on surfaces of any description, over 10cm in width or girth complete all as specified and directed. 39 Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. 40 Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. 41 Supply and fix viterous china squatting pan of Orissa pattern size 580x440mm white with integral foot rest(excluding flushing cistern) and flush pipe complete all as specified and directed. 42 Supply and fix in repais vitreous china(Pedestal pattern), of size 580mmx440mm white with integral foot rest with and including"P" or "S" trap, connection to trap and to flushing pipe, trap set in and including provision of lime concrete bedding and taking out old WC and connections etc complete all as specified and as directed 43 Supply and fixPVC valveless, syphonic action type flush tank in repair, white, 10 litre capacity with inlet ball valve, float & handle including brackets complete high level, flush pipes of PVC 32 mm dia, rubber cones, PVC connection 15 mm size with PTMT nut of length 600 mm etc complete all as specified and directed. 44 Supply and fixvitreous chaina wash hand basin white flat back of size 550mm X 400mm, fixed with a set of cast iron brackets including cutting and pinning in ends of brackets to wall, provision of 15mm size pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter "Hot or cold"" with long scrwed shanks and fly nuts, 32mm dia brass chromium plated waste fittings 450mm long PVC connection of 15mm size with PTMT nuts and 40mm dia waste pipe complete all as specified and directed. 45 Supply and fixing of soap dish vitreous china coloured approximate size (160mmx160mmx90mm) fixed in repairs complete all as specified and directed. 46 Supply and fix Tubular towel rail 20mm dia(d) type 60cm long between flanges aluminium anodised complete all as specified and directed. 47 Supply and fix 600x450mm be velled edge mirror of selected quality glass mounted on 6mm thick AC building baord or comercial plywood and fixed to wooden plugs with chromium plated brass screws and cup waste washer complete all as specified and directed. 48 Supply and fix in repairs stop/angle valve cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union & fixed , of bore of pipe 20 mm complete all as specified and directed. 49 Supply and fix bib tap fancy type Chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule & fixed bore of pipe 15 mm complete all as specified and directed. 50 Supply and fixing in repairs Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and directed. 51 Supply and fix 1000 Ltr capacity Rotational moulded polythene water storage tanks(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. 52 Supply and fix ball valves, high pressure,with polythene float and flynut complete ,25mm bore complete all as specified and directed. 53 Supply and fix 110mm PVC(SWR) bends complete all as specified and directed. 54 Material and Labour for 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/walls as soil pipe complete all as specified and directed. 55 Supply and fix 110X75mm PVC(SWR) reducer complete all as specified and directed. 56 Supply and fix for 110mmPVC (SWR) junction single (single T) equle or unequle with access door complete all as specified and directed. 57 Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 58 Supply and fix 75mm PVC (SWR) vent cowl complete all as specified and directed. 59 Supply and fix PVC (SWR) floor trap with grating 75 mm dia, plain with CPgrating including jointing with solvent cement complete all as specified and directed. 60 Supply and fix PVC connection 15mm bore size with PTMT nuts of length 45cm complete all as specified and directed. 61 Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. 62 All as per Item No 61 above but for 25mm bore. 63 Supply and fixing in CPVC 20mm Brass Elbow (3/4 x 1/2) complete all as specified and directed. 64 Supply and fixing in CPVC 20mm Brass Tee complete all as specified and directed. 65 Supply and fixing in CPVC 20mm Male Brass Threaded Adaptor (MTA/ MBTA) complete all as specified and directed. 66 Supply and fixing in CPVC 20mm Female Brass Threaded Adaptor (FTA/ FBTA) complete all as specified and directed. 67 Material and labour for point wiring for one light point controlled by one way switch complete with 1100Volts grade 1.50 Sqmm PVC insulated unsheathed multistranded FRLSH grade copper conductor cable fixed/ drawn through and including white/ ivory colour heavy duty PVC casing/ capping with accessories and fixing on wall/ ceiling including PVC board with cover (ISI marked)for mounting switches, sockets, regulators etc and providing one run of 1.5 sqmm PVC insulated unsheathed multistranded FRLSH grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of paris/ putty complete all as specified and directed. 68 (a) One light point controlled by one way switch. 69 (b) One exaust fan point controlled by one way switch 70 Material and Labour for switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified and directed. 71 Supply and fix ceiling rose, surface backlite, 65 x 20 mm three terminal complete all as specified and directed. 72 Supply and fix double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires complete all as specified and directed. 73 Supply and fixtesting and commissioning of MCB SP 240 volt 6 Amp to 16 amp 10 KA capacity having C-series connected with suitable lugs complete all as specified and directed. 74 All as per Item No. 71 above but for SPN 6-16 Amps 75 Material and labour for earthingcomplete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25metre deep below natural ground level) with top edge of the plate not less than 1.5metre below normal ground level, connected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel connected to main switch board/ main DB’s/ earth test point with and including necessary excavation and earth work in any type of strata, PCC 1:3:6, type C1 in chamber wall with 50mm thick, RCC cover 1:2:4, type B0 duly reinforced with 6 mm diabar, @100mm both way with suitable lifting handle, charcoal dust and common salt mixed and packed in 150mm thick layer all around the earth plate, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh, GI protection pipe 15mm dia light grade up to 7.5m from electrode and engraving of earth marking on nearby structure/ building with cement motor 1:4 plate of size 200mm x 150mm x 15mm thick and writing of earth results with paint complete all as shown in electrical plate No. 3 of SSR Part-I complete all as specified and as directed. Note: - On testing if desired earth resistance is not obtained, the earthing will be redone at no extra cost. 76 Supply and Fixing LED light fitting 1 x 20 watt 220 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible coper conductor cable of suitable size from ceiling rose complete all as specified and as directed. 77 Supply and fix LED light fitting 1x 9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.complete all as specified and as directed. 78 Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including making suitable hole on wall and making good complete all as specified and as directed. 79 Supply, lay and connect cable XLPE Insulated screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core including taking down old unserviceable service wire/cable of any size complete all as specified and as directed. 80 Supply and Laying DWC HDPE pipe of outer dia of 50mm and inner dia 40mm polyethylene (PE) with smooth internal and profiled external surface for non-pressure for underground cable including bends complete all as specified and as directed. 81 Supply and fixing galvanised pipe light grade of ISI marked 40 mm bore for passing of cable fixed to poles/walls/lay under floor complete with and including fittings as required complete all as specified and as directed. 82 Supply and Laying in trenches galvanised steel water tubing of medium grade with and inclding all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as requierd at site, laid in trenches including dismantiling and taking out old unserviceable pipe line along with fittings from existing connections complete all as specified and as directed.Note:- (i) Excavation and earth work shall be measured and paid separately under relevant item of Sch "A"(ii) The rates quoted inclusive of cutting, jointing and testing of the pipe (iii) All other fittings requierd shall be provided by the contractor at his own cost. 83 (a) Bore of tube 25 mm dia 84 (b) Bore of tube 20 mm dia 85 Supply and fix Gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling of old unserviceable gate valve fixed at any location complete all as specified and as directed. for the following sizes :- 86 (a) 25 mm (1”) dia pipe 87 (b) 20 mm (3/4”) dia pipe 88 Supply and Fix float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repairs for 20 mm dia (minimum weight 210 gms) complete all as specified and as directed. 89 Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil 90 Excavating in trenches, n exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and getting out in soft/loose soil 91 Excavating in trenches, n exc 1.5 m wide and exc 3 m and n.exc. 4.5m in depth; for foundation, etc. Or for shafts, wells, cesspits, manholes, pier holes, etc. N exc 10 sq m on plan and getting out in soft/loose soil 92 M&L for PCC 1:3:6type C-2 using 40mm graded stone aggregate as in foundation, filling in mass concrete complete all as specified and directed by Engr-in-Charge. 93 M&L for Brickwork with fly ash bricks in one brick thick honey-comb walling, built in CM 1:4 complete all as specified and directed by Engr-in-Charge. 94 M&L for rendering 15 mm thick in CM 1:4 on on fair faces of brick work or concretesurface even and smooth using water proofing compound (WPC) & without using extra cement all as specified and as directed by Engr-in-charge. 95 M&L for Aggregate for loose filling, of gauge 80 mm to 150 mm graded all as specified and as directed by Engr-in-charge. 96 M&L for RCC M 15 Type B1 (using 20mm Graded Stone aggregate) as in bands 97 M & L for RCC M25 (Design mix) for slabs supported on walls beams and columns in floors roofs landings balconies canopies deck slabs and in shelves and like complete all as specified and directed. 98 M & L for drain pipes NP-2 pipe of size 150mm laid in trenches and jointed as specified 99 S & F of LLDPE septic tank on site Conventional designed of capacity 2000 lites to carry sewage and sullage water, excavatioin in any type of soil as requried depth, laying of PCC 1:4:8 below foundation, foundation as per manufacture, hounching of Spetic tank, vent shaft, connection and returning filling duly compacted made leveletc, complete. Make as per Engineer-in-charge direction
|
