Bids Are Invited For Acquisition, On An Emergency Basis, Of The Motor Pump System For The Water Supply Of Ho ... in Brazil

Work Detail

Motor Pump Moto Pump - Three-Phase Drinking Water Supply Pumps Must Meet The Minimum Specifications Below: - Minimum Power Of 10 Hp; - Three-Phase Voltage Of 380 V; - 2 Inch Inlet Suction; - Output Pressure Of 1.5 Inches; - Minimum Flow Of 25 M³/H. - Minimum Warranty Of One Year., Motor Pump Motor Motor - Three-Phase Hot Water Recirculation Pumps Must Meet The Minimum Specifications Below: - Minimum Power 1Cv;- Three-Phase Voltage Of 380 V;- Input Suction Of 1.5 Inches (Bsp Thread);- 1 Inch Outlet Pressure (Bsp Thread); - Minimum Flow Of 1 M³/H; - Minimum One Year Warranty., Electronic Electric Cable Electronic Electric Cable - Type: Flexible Electric Hepr Diameter: 35 Mm² Color: Black Class: 5 Voltage: 1Kv, Electronic Electric Cable Electronic Electric Cable - Type: Flexible Electric Diameter: 10 Mm² Color : Blue Class: 4 -Bwf-B Voltage: 750V, Electronic Electrical Cable Electronic Electrical Cable - Type: Flexible Electrical Hepr Diameter: 35 Mm² Color: Green Class: 5 Voltage: 1Kv, 12/19/2024, Control Panel Minimum Technical Specifications.- 01 (One) Control Panel Steel Control With Gray Electrostatic Painting With Door With Two Locks, The Frame Sheet Must Be Made Of Steel With Orange Electrostatic Paint. - 01(One) Three-Phase General Circuit Breaker Of 63A Curve C- 02(Two) Three-Phase Motor Circuit Breaker Of 18A Curve C- 02(Two) Softstarter For Three-Phase 10Hp Motor (Reference Model Ssw07-Weg)- 04(Four) Contactors 25A Three-Phase With At Least 1 Auxiliary Contact Na E 1 Auxiliary Contact Nf- 01(One) 6A Monopolar Circuit Breaker Curve C- 01(One) Din Rail Auxiliary Socket For Electrical Panel- 01(One) 22Mm Emergency Button With Retention With One Nf And One Na- 02( Two) 22Mm 3-Position Toggle Switches With At Least 2 Contact Blocks Na- 04 (Four) 22Mm Led 220Vac Green Signals Must Be Capable Of Fixing 4Mm² Cables And They Must Be Of The Spring Type. The Output Terminals Of The Float Must Be Capable Of Fixing Cables With 2.5 Mm² And Must Be Of The Spring Type. Spring Type. At Least 6 Terminals Capable Of Fixing Cables With 2.5Mm² Spare Internal Cables Of The Board Must Be Stored In Channels With Covers. All Cables And Components Must Be Identified With Labels And The Electrical Project Must Be Made Available Next To The Board. Labels Must Be Attached To The Front Cover That Signal At Least: 3 Position Switches: B1 Off B2 B3 Off B4 Signals: B1 Onb2 Onb3 Onb4 On Soft Error B1 B2soft Error B3 B4emergency Activated. - Minimum One Year Warranty.

Contact Information