|
Beautification and improvement work of Adonis Nimbu Park situated at Nazul - Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 2 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 3 Synthetic Acrylic Surface , 8 Layer cushion System 4 Supplying and Fixing of Frog Bin - FRP outdoor playing equipmentincluding necessaryfittings, T&P etc all complete in direction of engineer in charge.(Model No.FPDB11, Make Fun Play/ Kompain/ Arihant) PSR 5 Supplying and Fixing of Imperial Bench 4" outdoor playing equipmentincluding necessaryfittings, T&P etc all complete in direction of engineer in charge.(Model No. FPGD11, Make Fun Play/ Kompain/ Arihant) PSR 6 Supplying and Fixing of Turbo Tower outdoor playing equipment including necessaryfittings, T&P etc all complete in direction of engineer in charge.(Model No.FPCL35 , Make Fun Play/ Kompain/ Arihant) PSR 7 structural steel work riveted, bolted or welded in built up sections, trussses and framed work including cutting, including cutting, hoisting, fixing in position and applying a priming coat of approve steel primer all complete DSR 10.2 8 Providing and fixing bolts including nuts and washers complete.DSR 10.20 9 Applying priming coat:With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works DSR 13.50.2 10 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer"s specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work DSR13.52.1 11 Aqua soft RO Plant250 LPH 12 Surise water cooler 200 LTR FSS 13 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.DSR 2023 / 18.48A 14 Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides removal and disposal of surplus earth as directed by the engineer in charge up to a distance of 30m from the doundation trenches including all T&P phowarah and basket etc. complete. 15 Cement Concrete with 40 mm gauge approvedStone ballast ,Coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST 16 Same as item no Above For lintel in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Graded stone aggregate 20 mm nominal size (Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks) 17 Same as item no Above For lighter beams in 1:1.5:3(1 cement : 1.5 Coarse sand :3 Graded stone aggregate 20 mm nominal size 18 Same as item no Above For slabs in 1:1.5:3(1 cement : 1.5 Coarse sand :3Graded stone aggregate 20 mm nominal size 19 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers 20 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform 21 Mild steel or iron work in plain work such as in R.C.C. or R.B. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 22 Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 23 P/F MS grills of required pattern in frames of windows fixed to opening/wooden frames with rawl plugs screws etc. 24 Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 25 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation .50 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 26 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation .50 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) 27 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) 28 Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. 29 Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutters. 30 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Teak wood 31 Providing & fixing glass panes with putty and glazing clips in steel / Wooden doors, windows, clerestory windows, all complete with : 5 mm thick glass panes 32 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm 33 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 200x10 mm 34 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 200x10 mm 35 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) 36 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) 37 Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster 38 Add for plaster drip course/groove in plaster the all or in ceiling vertically or horizontally as required. 39 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 40 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab over 0.50 sqm 41 Finishing walls with Premium Acrylic Smooth exterior paint with Siliconeadditives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 42 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 43 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 44 Painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & two coats of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t & p etc. required for proper completion of work. paint to be used should confirm to the IsI no. 103 1950. 45 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand)admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surfacewith trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm 46 8.2, Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 8.20.1, Red sand stone - 30mm thick gang saw cut stone 47 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).DSR Horticulture 2020; 2.25 48 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge DSR Horticulture 2020; 2.9 49 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). DSR Horticulture 2020; 2.8 50 Hedge Plant 2.57.3 (Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) DSR Horticulture 2020; 2.57) 51 Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. DSR Horticulture 2020; 6.7 52 Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. DSR Horticulture 2020; 5.3 53 Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy infull bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.,DSR Horticulture 2020; 5.12 54 Providing and Displaying Cycus revoluta specimen , having 45 to 50 freshand healthy, leaves having 30cm to 35cm circumfrance of base stem welldeveloped in 40 cm challi, as per direction of the officer-in-charge.DSR Horticulture 2020;5.15 55 Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge.DSR Horticulture 2020; 6.25 56 Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cmht., with fresh and healthy Golden colour foliage in 35cm Cement Pot asper direction of the officer-in-charge.DSR Horticulture 2020; 5.18 57 Providing and Displaying Ficus Retusa topiary well developed with fresh &healthy 5 to 6 big ball specific size and shape 180 to 210cm ht in 40 cmCement Pot as per direction of the officer-in-charge. DSR Horticulture 2020; 5.24 58 Providing and Displaying Foxtail palm well developed with fresh & healthyfoliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of theofficer-in-charge.DSR Horticulture 2020, 5.30 59 Providing and Displaying Furcaria Variegated hybrid well developed withfresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Potas per direction of the officer-in-charge. DSR Horticulture 20205.32 60 Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. s per direction of the officer-in-charge.DSR Horticulture 2020 8.14 61 Providing and stacking of Murraya exotica of height 45-60 cm. in poly bagsof size 15 cm as per direction of the officer-in-charge.DSR Horticulture 2020, 8.46 62 Providing and stacking of Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pots of size 25 cm as per direction of theofficer-in-charge.DSR Horticulture 2020, 8.48 63 Providing and stacking of Plumbego capensis well developed with freshand healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Potas per direction of the officer-in-charge..DSR Horticulture 2020, 8.55 64 Providing and stacking of Tabernaemontana coronaria (chandni variegated) of height 45-60 cm. with 3-4 branches earthen pots of size 20 cm as per direction of the officer-in-charge.DSR Horticulture 2020, 8.61 65 Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm.in big poly bags of size 25 cm as per direction of the officer-in-charge.DSR Horticulture 2020, 7.16 66 Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.1 67 , Providing and stacking of Bignonia venusta (Golden shower) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.9.3 68 Providing and stacking of Ipomoea purpurea (Morning glory) of height30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.7 69 Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.12 70 Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.14 71 Providing and stacking of Petra volubilis of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge., 9.11 72 Trenching and Back Filling. Sanctioned Rate. 73 Supplying Testing & Installation of Garden Spike Light 12W WWMake Philips/ Wipro/ Lusteretc all complete of direction of engineer in charge. 74 Supply and fixing of decorative16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect. Alluminium make approx 2 feet height 75 Supply, Installation, Testing and Commissioning of LED RGB/RGBWfloodlighting luminaire for facade lighting with Die-cast aluminiumhousing, powder-coated finish, of following wattage. Luminaireshall be capable of producing dynamic color changing light for with16 million colors by DMX/Ethernet based control. The beam angleof the fitting shall be narrow, medium, wide or asymmetric as perthe requirement. Luminaire shall be complete with driver andcapable of operating at line voltage without any separate powersupply from 100-270 V AC, 50 Hz with power factor > 0.9 . Fixtureshall be suitable to operate at an ambient temperature range of -10°C to +50°C and shall be IP 65 and IK 06 rated. Lifetime shall be atleast L70:50000 burning hours at 50°C. Luminaire shall beconforming to BIS (IS 10322) and shall be complete with allnecessary accessories required for proper working of fixtureincluding weather proof connection cables, water proof connectorsetc. as required. 250 W 1.3 76 6.00 Sqmm 4 Core (Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ) 77 25.00 Sqmm 3.5 Core (Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ) 78 70.00 Sqmm 3.5 Core (Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. ) 79 63 mm dia (OD-63 mm & ID-51 mm nominal) Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 80 90 mm dia (OD-90 mm & ID-76 mm nominal) Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 81 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince) 82 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince) 83 50 mm dia. (Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Finolex / Prince)) 84 P-Trap type Floor Trap 110 x 75 mm(Providing & fixing UPVC Floor trap of self cleansing designwith CP Jalicomplete in all respects. (Make : Supreme / Finolex / Prince)) 85 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 86 Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including50 mm dia. C.P. waste jali complete as required. 87 Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in heavy gauge rigid steel conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 14 S.W.Gcopper earth continuity wire&piano typeswitchetc. complete in all respects. 88 Same as in item no. 1 but for fan. and light duty exhaust fan 89 Same as in item no. 1butfor 5ampplug point with piano type switch & socket etc. 90 Add for light / fan points with modular type switches in place of piano type switches 91 Add for plug point with modular switch & socket in place of piano type switch & socket 92 Supply & fixing of power plugwith20amp 250 volts flush type modular switchand 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work 93 2 x 4 sq. mm.In 20 mm dia conduit. Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. 94 2 x 10 sq. mm.In 25 mm dia conduit. Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. 95 12 WAYS CAT-B (S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge.) 96 Supply & fixingof 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) 97 S/F of 40 Amp DP MCB (10 KA)(Legrand Lexic) 98 S/F of sheet steelenclosure for DP / TP / FP MCB with neutral link and earth terminal. CAT-B 99 Supply&burryingof 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnelforwatering and one earthing lead ofno. 8SWGG.I. wirein 15 mm dia. GI pipe uptoswitch board (from apron to switch boardthecost of GI pipe & GI wire willbeextra)300mm square C.I. box with hinged cover,masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . 100 Supplying & Laying of one number 8 SWG G. I. wirein 15 mm. dia. G. I.pipefor earthing, laidin groundor inwall duly concealedincludingthecostofcement, sand, labour, T&Pandothermaterial required for proper completion ofthework as directed at site. 101 10 sqmm 2core (Supply andlayingofISI marked aluminiumconductor PVC / XLPE insulated armoured,served,sheathed cable 1100volts gradeat 750mmbelow ground level overacushion of 75 mm thick sand around & protected with brick onsides & top on surfacethecablerunshallbe fixed on M.S. clamps etc. of suitablesize completeinallrespect. The armouring of the cable shall be properlyconnectedwith the earth conductor by clamps etc.) 102 10 sq.mm. Supplyfixing of plam orpintypecopper tin plated cable socket (lug) tothecable leads, insulating with tapeand making connections etc. complete in all respects as per direction of Engineer-in-charge. 103 10 sqmm 2core (Supply andfixing brass nickle plated compression glandsfor PVC insulated armoured,served,sheathed cable including rubber ring etc.completeinallrespect. The armouring of the cable shall be properlyconnectedwith the earth conductor.) 104 Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. 105 Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. 106 Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. 107 Supply & fixing ofLED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA 108 Supply & fixing of recess/ surface mounting round 24 watt to 32 watt LED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. 109 300 mm sweep 110 300 mm sweep 900 rpm ((Make : Bajaj / Crompton / Havells) Supply of AC230/250 volts, 50 HZ exhaust fansincluding providingnuts, bolts, mounting frame and other accessories etc.complete )
|
