Tender For For The Work Of 11 Kv R.M.U. (Ring Main Unit) In Buisness Plan (Part-2) On Semi Turn-Key Basis Un ... in India

Work Detail

For The Work Of 11 Kv R.M.U. (Ring Main Unit) In Buisness Plan (Part-2) On Semi Turn-Key Basis Under Edd-2 Agra. - Part-A (Supply of Material)11 KV Cross Arm Holding clamp with Nut Bolt 2 11 KV Disc Insulator With Fitting 3 Holding Clamps with Nut & Bolt for STP Pole 4 Part-B (Erection work)Cartiage of11 KV XLPE 3x185 sqmmfrom store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.) 5 Cartiage of 11 KVJointing Kit 3x185 sqmm indoor/outdoorfrom store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.) 6 Cartiage ofST Pole 11 Mtr from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.) 7 Cartiage of11 KV RMU Set 02 Way (11kV Ring Main units with 2nos. load break switches and 1 No. circuitbreaker) from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.) 8 Cartiage of11 KV RMU Set 03 Way (11kV Ring Main units with 03nos. load break switches and 2 No. circuitbreaker) from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50Kms.) 9 Cartiage of Line Material from Store Center Agra to work of site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-50Kms.)Line material viz. Aerial bunch conductor/Weasal conductor/Dog/ Rabbit, G.I. earth wire,Top Channel, cross arm, angle, channel, insulators,clamps, Dist. Box, and other line material, if required in Estimate/Package. 10 Erection and grouting in 1:2:4 ratio (cement, sand and bricks balast) on Double Pole 11 Mtr. long ST poles including fixing ofall accessories for 11 KV line as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost. 11 Filling of 11KV 3x185 sqmm Indoor/Outdoor Jointing Kit and making connection as per direction of supervising engineer. 12 Installation Testing & Commissoning of 11 KV RMU 02 WAY(11kV Ring Main units with 2nos. load break switches and 1 No. circuit breaker) including fixing of all accessories, T&P and Labour as per RESPO Norms and direction by supervising Engineer. 13 Installation Testing & Commissoning of 11 KV RMU 03 WAY(11kV Ring Main units with 3nos. load break switches and 2 No. circuit breaker) including fixing of all accessories, T&P and Labour as per RESPO Norms and direction by supervising Engineer. 14 for the work of Chemical Earthing for 11 KV RMU as per RESPO Manual.(All material provided by the contractor at his own cost) 15 Construction of plinth of size 6 *6 * 4 above ground level one ft below the ground level of 9 After Exavation of 4 earth brick ballast shall be provided and rammering willbe done properly After ballast shall be provided and rammering will be done properly After that a retaining wall 9width by fist class brick in ratio 1:4 of cement & sand shall be made . The earth shall be filled up to one ft.below the top of the plinth After this brick ballast shall be provided upto 6from the earth level and proper rammering shall be done one No. jall of 12 mm MS tor shall be fixed in the hollow of plinth and one ft. thick RCC in ratio of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand. .(All material provided by the contractor at his own cost) 16 Net Fencing Shall be 1150*1200 mm made of 35*35 mm MS Angle covered by expended netal 14 SWG up to full Height 1200 mm duly steftened by MS flat by an 8 SWG dia bolt & nut ..(All material provided by the contractor at his own cost) 17 Laying and dressing of 11 KV under ground cable of size 3x185 sq mm in the trench 450 mm fine sand cushion beneath and 150 mm fine sand cushion above the cable. The cable shall be duly protected by 1 class brick two on either side and third on top of the cables. Laid in series one after the other. The work includes supplying of fine sand & bricks refilling and ramming of the left out soil closing the trench and leveling Spare cable shall be left and buried in the trench in the shape of rings at both ends. Cables laying work includes unroling cutting / megaring & sealing both ends of the cable. 18 Laying of 11 KV 3x185sqmm XLPE cable in trenchwith making loop (at a distance of approx. 4 mtr.) laying of bricks (18 nos. in one meter), filling of sand in trench then laying earth and its levelling and rammuring etc., complete work as RESPO norms.

Contact Information