Tender For Reasons For Conversion Of Office In New Upmantri Residence No-9 Situated At Vikramaditya Marg Inc ... in India

Work Detail

Tender for Reasons for conversion of office in new Upmantri residence No-9 situated at Vikramaditya Marg include re-plastering of Shatigrast plastering place in the residence, making Shatigrast kitchen modular, repairing/renovating Shatigrast bathroom/toilet in the residence and servant quarter, installing PVC wall panels in the drawing room, guest room and the room adjacent to the kitchen of the residence, making wardrobe-almari and making arrangements for attached bathroom, painting the outer part of the residence and other necessary various repairs. - Dismantling Tile work in Floor and roof laid in cement mortar including stacking material within 50 meters lead. Forthickness of tiles 10 mm to 25 mm. DAR.N0-15.23.1 2 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.40) 3 Providing and laying Floor/wall tiles Sizes -300X600 mm(thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement Mortar 1:4 (1 cement 4 Coarse Sand) jointings with Grey Cement Slurry @3.3 kg/Sqm including Grouting the joints with white Cement and matching Pigment etc. Complete, as per direction of Engineer-in-charge.(Kajaria/Johnson/RAK Premium quality) 4 Providing and laying Vitrified floor Size of Tile 600x600 mm in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved Make, in all colours & shades, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey Cement Slurry @ 3.3 kg/Sqm including grouting the joint with white cement and matching Pigments etc. Complete.. (DAR-11.41.2) 5 Dismantling Old Plaster or SkirtingRacking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. DAR No-15.56, 6 Earth work in Surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan lncluding getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. (All kinds of soil)( DAR.No-2.1.1, 7 Providing and laying in Position Cement Concrete of l 1:5:10 (1 cement, 5 Coarse sand (Zone-lll) Derived from natural Sources : 10 graded Stone aggregate 40 mm nomical size Derived from natural Sources ) DAR N0-4.1.10, 8 Brick work with Common burnt clay F.P.S.(Non Modular ) bricks of Class- designation 7.5 in foundation and plinth in 1:4 Cement and Coarse sand of Mortar in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.1.1, 9 Provoding and Laying Damp Proof Course 40 mm thickwith Cement concrete 1:2:4, ( 1 Cement, 2 Coarse Sand (Zone-lll) Derived from natural Sources : 4 graded Stone aggregate 12.5 mm nomical size Derived from natural Sources ) DAR N0-4.10, 10 Brick work with Common burnt clay F.P.S. (Non Modular ) bricks of Class designation 7.5 in Superstructure above plinth level up to floor V level in all shapes and size in Cement Mortar 1:4 Cement and Coarse sand in including Supply of all materials labour T& etc required for proper completion of work as per DAR.No-6.4.1, 11 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources. DAR N0-5.3, (Lintels, Columns, Pillars, Slab) 12 Steel reinforcement for R.C.C. workincluding Straightening, Cutting, Bending, Placing in position and binding all Complete upto Plinth Level. Themo-Mechanicaily Trated Bars of grade Fe-500D or more.DAR-5.22C.1, 13 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DAR-13.4.1, 14 DismantlingDoors, windows and clerestory window (Steel or Wood) shutterincluding chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. DAR.No-15.12.1, 15 Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws.DAR N0-9.21.2, (Rs-1715.85) 16 Providing and fixing ISI marked flush door Shutters Conforming to IS : 2202 (Part I) decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt Hinges with Necessary Screws. DAR N0-9.20.1, 17 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. 30 mm thick Pre Laminated PVC door shutters DAR-9.122.2, 18 Supply and fixing of Stenless Steel Door And Window Fittings as Sliding Bolt, Tower Bolt, Handels etc. Complete as Direction of i/c. 19 Providing and Fixing 18 mm thick gang saw cut, Mirror Polished, Premoulded and Prepolished, Machine cut for Kitchen Platform, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20mm thickbase Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. cmplete at all levels. Granite Stone slab of Colour black, cherry/ruby redArea of Slab upto 0.50 sqm. (DAR-8.2.2.1, 20 Providing and Fixing of Kitchen Cabinet 60 cm Depth with Centurey Ply 19mm thick of Superior quality and both side Laminated 1mm thick sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge. 21 Providing and Fixing Kitchen Cup Board 30cm Depth 19 mm thick Century Ply ISI marked Superior quality and Both Side Laminated 1mm thick Texture Sunmica Supirior quality Fixing with Glue and Nails etc and Fixing of Stainless Steel Fittings as Handle, Hinges etc. Complete work as Per Direction of Engineer in Charge. 22 Providing and laying Rectifited Glazed Ceramic floor tiles of Size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, ln colour White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with Grey cement Slurry @3.3kg/Sqm including Grouting the Joints with and matching pigment etc., complete. (DAR-11.39) (Endura Tiles) 23 Providing and laying Interlocking Concrete Block Pavement having thickness 80 mm as per drawings and technical specification Clause 1504,(Exclusive G.S.B) (Ch-25, Sl.N0-34), 24 Providing Reinforced by Organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, mor L hooks, bolts and nuts 8 mm dia. G.l. Plian and bitmen washers or with self drilling fastner and EPDM washers etc. complete (excluding the cost of purling, rafters and trusses) including cutting sheets to size and shape wherever required. DAR-12.8, (Rs-423.73) 25 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, 26 Providing and Fixing 12 mm thick densified tegular edged eco friendly light weight false ceiling tiles (Armstrong Mineral Fiber Acoustical Suspended Ceiling with New Lotus RH 70 Board Tile 600x600x12 mm module) of approved texture spintone/cosmos / Hexa or equivalent in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main "T" runner suitably spaced at joints to get required length and of size 15x45 mm made from 0.30 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross "T" of size 15x45 mm made out of 0.30 mm (Minimum) sheet, 1200 mm long spaced between main"T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T"of length 600 mm and size-15x45 mm made of 0.30 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x19X3000 mm made of 0.27 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 19 mm thick densified edges ceiling tiles of approved texture (Spintone / Cosmos/ hexa) in the grid, including, cutting/ making.opening for services like diffusers, grills,light fittings, fixtures, smoke detectors etc., The False ceiling tile shall have NRC. value of 0.50(Minimum), light reflection > 85%, non - combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity<0.043 w/m 0 KC. The Tile & Grid system used together should carry a 15 year warrantee. 27 Supply and Fixing of PVC wall Panel approved make, including supply of all material & labour and T & P etc. requird for proper completion of work. 28 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen Sink as per IS : 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225 mm. (17.10.1.2) Rs-5936.22 29 Supply and Fixing of Florentine Single Lever Sink Mixer Swinging Spout on Upper Side (Wall mounted Model) with Connecting Legs & Wall Flanges, Jaguar make Code N0-FLR-5165, including supply of all material, labour, T&P etc. Complete. 30 Supply and Fixing of Sink Cock with Regular Swinging Spout (Table mounted Model), Jaguar make Code N0-FLR-5357N, including supply of all material, labour, T&P etc. Complete. (Rs-2419) 31 Supply and Fixing of C.P. Angular Stop Cock with Wall Flange Jaguar Make. Code N0-FLR-5053N, including supply of all material & labour and T & P etc. requird for proper completion of work. 32 Providing and Fixing of 15mm dia Florentine C.P. brass Bib Cock, (Straight line model) with wall Flange Jaguar Make Code N0-FLR-5047N, including supply of all material, labour, T&P etc. complete. 33 Supply and Fixing of 15mm dia Florentine C.P. brass Two way bib cock with Wall Flange Jaguar Make Code N0-FLR-5041N, including supply of all material, labour, T&P etc. complete. 34 Supply and Fixing of Florentine C.P. Brass Single Lever Basin Mixer without Pop-Up Waste System with 450 mm long braided hoses, Jaguar Make Code N0-FLR-5001B, including supply of all material, labour T&P etc. complete. (Rs-3668) 35 Supply and Fixing of Florentine C.P. Brass Wall Mixter 3-in-1, System with Provision for both hand shower and overhead shower Complete with 115 mm long Bend Pipe, Connecting Legs & Flange (without Hand & Overhead Shower), Jaguar Make Code N0-FLR-5281N, including supply of all material, labour T&P etc. complete. 36 Supply and fixing of CPhand Shower Ø95mm round shape single flow (ABS body in chrome Plated with Grey Face Plate) with rubit cleaning sysyem of Jaquar make (Code No- HSH -1737) with Flaxible Tube 8 mm dia & 1.5m long with nuts Code no-SHA-549D8 including supply of all material & Labour and T&P etc complete. 37 S/F of Maze Over head Shower Ø300 mm RoundShape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System with Shower Arm Ø20 mm & 600 mm long Round Shape with 90° Bend for wall mounted showers with stainless Steel Flange Jaguar make, Code No-OHS-CHR-1633+SHA-479L600lncluding supply of all material & labour and T & P etc. requird for proper completion of work. 38 S/F 15mm dia C.P. health faucet with 8mm dia 1.20 Metre meter long flexible tube & wall hook, Jaquar make Code N0-ALD-573, including supply of all material, labour, T&P etc. complete. 39 Providing and fixing of Single Piece WC with UF Soft Close Slim Seat Cover Hinges, FixingAccessories Set And Cistern Fittings, Size-360x655x765 mm. P Trap 180 mm Code N0-LYS-WHT-38851P180UFSM, Jaquar make, including Cutting and making good the walls and floors wherever required: 40 Supply and fixing of Aria Wall Hung Basin With Pedestal, Size 570X470x190 mm ARS-WHT-39801+ARS-WHT-39301, Jaquar makewith C.P. jali, PVC waste pipe, Bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours, T & P etc. required for proper completion of the work. 41 S/F of C.P. brass Soap Dish Holder Jaquar Make Code N0-AQN-7731N, including supply of all material, labour, T&P etc. complete. 42 S/F of C.P. brass toilet Roll/Papar Holder with Flap Jaguar make Code N0-AKP-39753PS, including supply of all material, labour, T&P etc. complete. 43 S/F of C.P. Brass Single Towel Rack 600 mm with long hungers Jaguar make Code N0-AKP-35781PS, including supply of all material & labour and T & P etc. requird for proper completion of work. 44 S/F of C.P. brass towel ring Square Jaguar make Code N0-AKP-35721P, including supply of all material & labour and T & P etc. requird for proper completion of work. 45 S/F of C.P. trumbler holder Jaguar Make Code N0-AKP-35741P, including supply of all material & labour and T & P etc. requird for proper completion of work. 46 Supply and Fixing of Glass Shelf 600 mm long Jaquar make Code N0-AKP-35771P, including supply of all material, labour, T&P etc. Complete. 47 Supply and Fixing of Corner Glass Shelf (With Bracket) Jaguar make Code N0-ACN-1173, including supply of all material, labour, T&P etc. Complete. 48 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). 49 Supply and Fixing of S.S. Jali 125 mm dia, 50 Supply and Fixing of PVCNahani Trep, 51 Supply and Fixing of Peacock Storage Solution Kicthen Accesorise- Cup & Saucer Basket-15x20x4"", Rate-2182/1.18= 1849 52 Plate Basket 15x20x6"", Rate-2182/1.18=1849 53 Thali Basket 15x20x8"", Rate-2430/1.18=2059 54 Cutlery wire Basket-15x20x4"", Rate-2830/1.18=2398 55 Cutlery Perforated Basket-15x20x4"", Rate-3478/1.18=2947 56 Partition Basket-15x20x8"", Rate-2754/1.18=2334 57 Vegetable Basket-15x20x6"", Rate-1820/1.18=1542 58 Bottle Basket-15x20x6"", Rate-2830/1.18=2398 59 Wire Glass Tray Plate Tray-28x10x, Rate-2916/1.18=2471 60 Providing and placing on terrace ( at all floor levels ) Polyethylene Water Storage Tank. IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for intel, outlet and overflow pipes but without fittings and the base support for tank. DSR- 18.48) 61 S/F 15mm dia C.P. brass Angle valve of L&K make ( Code- 0077 ) including supply of all material, labour, T&P etc. complete. 62 S/F 15mm dia C.P. brass Pillar Cock Swan Neck with Casted Swinging Spout of L&K make (Code - 0027 ) including supply of all material, labour, T&P etc. complete. 63 Supply and fixing of White Glazed earthen ware wash hand basin with pedestal (Paryware/Cera/ Johnson Topaz make) with PVC waste pipe, bracket, pvc connection pipe 15mm dia 450mm long etc complete including supply of all materials, Labours,T & P etc. required for proper completion of the work (22"X16" size). 64 Providing and Fixing of 15mm dia C.P. brass Bib cock, Short Body, L&K Make (0057) including supply of all material, labour, T&P etc. complete. 65 Providing and Fixing of 15mm dia C.P. brass Bib cock, long Body, (L&K Make-0047) including Supply of all material, labour, T&P etc. complete. 66 Providing and fixingwhite vitreous china water closet Squatting pan Indian type Orissa Pattern W.C. pan of Size 580x440 mm DSR-17.13.2, 67 Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) Conforming to IS : 7231with all fittings and fixtures complete. 10 litre capacity white.(17.18.1). 68 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal outer dia pipe )18.8.2, 69 Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solventcement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal outer dia pipe )18.8.3, 70 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 75mm dia meter. 71 Providing and fixing on Wall Face Unplasticised Rigid PVC rain water Pipes conforming to IS:13592 Type A, including Jointing with Seal ring conforming to IS:5382, Leaving 10mm Gap for thermal expansion, all fittings like two nos bend, one mo Coupler or any other accessories and P/F PVC pipe clips fixed by means of 50X50X50mm hard wood plug, Secrewed with MS Screws of required lenght in wall face including cutting brick work and fixing in cement mortar 1:4 (i) Single Socketed pipes 110mm dia meter. 72 Providing And FixingFly Proof galvanized M.S. wire gauge to windows and Clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. DAR No-9.51.1, 73 Providing and fixing brass Curtain Rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 14.28.2 25 mm diameter. metre 421.75DAR-14.28, 74 Providing and Fixing of Wall to Wall Wooden Almirah with 19mm thick Century Ply Board ISI marked lncluding Laminated Both Side 1 mm thick Sunmica Supirior quality Fixing with Glue and Nails etc S.S.Handle, S.S.Hinges Magnet. Lock etc. Complete work as Per Direction of Engineer in Charge. 75 Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), 76 Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.DSR-13.88, 77 Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), 78 Painting with Synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coatson new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR.N0-13.62.1), 79 Providing and fixing Ist quality Ceramic Glazed Wall tiles Conforming to IS :15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size-300x450 mm, (DAR-8.31), 80 Providing and injecting chemical for post constructional Anti termete treatment with drilling holes and junctions of Floor with walls and pillars the application of chemical shall be as per relevant I.S. code and the rate of application of chemical shall be also be as providing in the I.S. code including quarterly inspection and providing required treatment for one year as per direction of Engineer in charge. 81 Providing and Applying water proofing Treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consising of applying. (A) After surface preparation, frist layer of slurry of cement @ 0.488 kg/Sqm mixed with water propfing cement compound @ 0.253 kg/Sqm, (B) laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints og fibre cloth should not be less than 10 cm., (C) third layer of 1.5 mm thickness consisiting of slurry of cement @ 1.289kg/Sqm mixed with water proofingcement compound @ 0.670 kg/Sqm and coarse sand @ 1.289kg/Sqm this will be allowed to air cure for 4 hours followed by water curing for 48 hours. the entire treatment will be taken upto 30 cm on parapet wall and trucked info groove in parapet all around , (D) fourth and final layer of brick tiling with cement mortar (Which will be paid for separately. For the purpose of measurment the entire trated surface will be measured. DAR-22.6, 82 Disposal of building rubbish /malba /Similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. DAR No-15.60,

Contact Information