|
(Id109007) Fixed Chair, Model: Trapezoidal Base With Medium Back; Seat And Back With Injected Polyurethane Foam, Composed Of An Injected Polypropylene Core (Thickness 12 Mm), With A Density Of 55 To 60 Kg/M, Anatomically Molded With A Thickness Of 40 To 46 Mm, Protective Cover And Injected Finish In Textured Polypropylene, High Mechanical Resistance Against Impacts And Resistant To Products Chemicals; Seat With Minimum Capacity 120Kg; Structure: Composed Of 2 Trapezoidal-Shaped Bent Tubes Made Of 1.5Mm Ø22.2Mm Steel, Welded Perpendicularly To 2 Parallel Seat Support Crossbars, Made Of 1.9Mm Ø22 Steel, Receives 4 Trapezoidal-Shaped Shoes Made Of Polypropylene, Fitted And Fixed To The Base Rivet Beams; Dimensions (±30Mm): Seat: 480Mm Wide And 470Mm Deep, Backrest: 420Mm Wide And 490Mm High; Covering: Material (Courvin, Vinyl Or Polyester) And Color According To The Requesting Body; With Report Issued By A Laboratory Credited By Inmetro., (Id110131) Emergency Car, Material: Laminated Steel Sheet, With Anti-Rust Treatment And Textured Electrostatic Painting, Composition: Upper Fixed Tray With Side Handles, Lower Fixed Tray With 04 Wheel Movement Castors 360 Degrees And Braking On Two Wheels; 03 Drawers, 01 Drawer With 16 Dividers For Storing Medicines, 01 Closed Compartment With Sliding Lid; Equipped With A Power Cable Of At Least 3 Meters And A Socket Rail With A Capacity Of 4 Points (2P+T). Includes: Oxygen Support, Iv Support With Adjustable Height, Support For Defibrillator, Monitor, Cardioverter With Adjustable Height; Acrylic Cardiac Massage Board. Approximate Dimensions: 1150Mm Height X 570Mm Width X 520Mm Depth., (Id116773) Laser Printer, Type: Monochrome; Speed: 42Ppm Or Higher (Letter); Resolution (Black/Optimal): 1200 X 1200Dpi; Monthly Work Cycle: 100,000 Pages Or Higher; Processor: 600Mhz Or Higher; Memory: 256Mb, Expandable Up To 512Mb; Compatible Operating Systems: Windows, Mac, Citrix, Novell, Linux And Unix; Interface: 2X Usb 2.0 (1 Front) And Ethernet 10/100/1000 Basetx; Power: 115127V (±10%)., (Id117100) Rectangular Table, Type: Linear; With 2 Drawers; Top: Linear Surface; Dimensions (Lxw): 1200X600mm; Material: Mdp, 18Mm Thick; Comes With 02 Injected Polystyrene Cable Grommets, 01 Horizontal Wiring Rail Made Of Steel Sheet, For The Passage Of Electrical And Logical/Telephony Wiring; Pvc Drawers, With Telescopic Steel Slides; Front Lock, With Simultaneous Locking Of The Drawers; With Handle Of Approx.128Mm; Panel: Structural; Material: Mdp, 15Mm Thick, Suspended From The Floor And Attached To The Structural Columns; Structure: Composed Of 02 Metal Columns With Stabilizing Feet; Dimensions (A): 740Mm; It Has An Internal Part In The Shape Of A “U“, Allowing The Separation Of Electrical, Logical And Telephone Wires And A Removable Cover For Passing The Cables; Material: Steel Or Extruded Aluminum; Feet With Leveling Shoes In High-Impact Injected Polystyrene; All Mdp Material Must Be Covered, On Both Sides, With Textured Melamine Laminate; Side, Front And Back Edges Finished In Pvc Tape In The Same Color As The Laminate; All Metallic Parts Of The Set Must Be Finished In Anti-Corrosive Paint In Epoxy Resin Or Similar., (Id142347) Microcomputer, Type: Desktop (Sff); Ram Memory: Minimum Ddr42933mhz,
|
