|
Adapter In Blue Color With Female Thread In Polypropylene For Connecting Polyethylene Pipes With Threaded Components Of 20 ( 1/2 ) 9052, Or Polypropylene, Manufactured In Accordance With Nbr 9798, With A Mechanical Joint Pouch For Pe Polyethylene Pipes, Manufactured In Accordance With Nbr 8417, And A Threaded Tip In Accordance With Nbr Nm Iso 7-1, For Joining Threaded Components, For The Execution Or Maintenance Of Building Water Connections., Adapter In Blue C / Male Thread In Polypropylene For Connecting Polyethylene Pipes With Threaded Components Of 20 (1/2) X Dnr 20 ( 3/4 ) Adapter With Female Pvc Thread, Blue Manufactured According To Nbr 9052, Short S/R Pvc Adapter 25Mmx3/4( 0.60 / 1.00 Mpa ) Injected Short Pvc Adapter With Weldable Bag And Threaded Tip, Thread In Accordance With Nbr Nm Iso 7-1, Manufactured In Accordance With Nbr 5648, For Interconnecting Weldable Pvc Pipes With Threaded Plastic Components, For Cold Water Building Installations., Short S/R Pvc Adapter 50Mmx1.1/2( 0, Short S/R Pvc Adapter 60Mmx2( 0, 16/12 /2024, Short S/R Pvc Adapter 75Mm X 2.1/2 In Aluminum For 20Mm Hdpe, Pvc Pba Cap. Dn 110Mm (0.60/ 1.00 Mpa) Injected Pvc Cap, With Elastic Gasket Bag, Manufactured According To Nbr 5647-1, Supplied With Corresponding Rubber Rings, For Cold Water Installations, Pvc Pba Cap. Dn 60Mm (0.60/ 1, Pvc Pba Cap. Dn 85Mm (0.60/ 1, Pvc Welded Cap. Dn 85Mm (0.60/ 1, Collar Socket Ff/Fc 125Mm Ductile Ff Socket Collar For Fiber Cement Pipes 6, 3(1Mpa)Dn 125Mm Fully Coated With Anticorrosive Enamel, Adhesive, Non-Sticky Or Epoxy Powder Coating, Supplied With A Set Of Two Hex Head Screws, Two Hex Nuts And Four Steel Washers, Fire Galv In Accordance With Astm A153 Class C, And With A (1) Rubber Gasket (Ring) For Branch Seal, For Applications Under Nominal Pressure 0, 70 Mpa And Maximum Service Pressure 1 Mpa, For Execution Of Building Connection In Potable Water Distribution Networks, With Fc 6, 3 Pipes Manufactured In Accordance With Nbr 5647-1/2. The Outlet Collars Must Present , In High Relief, The Following Markings: Name And/Or Identification Mark Of The Manufacturer, Pipe Number, Derivation Dn, Indication Of Application In Pvc., Ff/Pvc Socket Collar 60Mm Ductile Ff Socket Collar For Pvc Pipes 6, 3(1Mpa) Dn 60Mm Pvc Pipes 6, 3(1Mpa)Of 60Mm (Dn 50Mm) 4)Ductile Ff Socket Paste, Cutter In Aluminum For Hdpe 20 To 32Mm, Cast Iron Crosshead For Pvc Pipes Dn 60Mm, To Be Used In Cold Water Hydraulic Installations, According To Nbr 6943, Supplied With Corresponding Rings, Cast Iron Crosshead For Pvc Pipes Dn 75Mm, Crosshead In Cast Iron For Pvc Pipes Dn 85Mm, Device Supression (Ob-Bullet) 18Mm Hexagonal Nut Male Thread, For Cutting Water Supply On ¾” Trestle, Choke For 20Mm Hdpe,
|
