|
Tender For Furniture For 50 Bedded Hospital - 1 Revolving Chair Seat & back made of 12mm thick hot-pressed plywood, with fabric Finish with moulded polyurethane foam with PVC lapping all around. The back foam is designed with contoured lumber support for extra comfort. Back size 480(W) x690(H)+/- 10mm. seat size 480(W)x 450(D) +/- 10mm. The one-piece armrest made of black integral skin polyurethane with 75-85 shore hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant. The armrests are fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. HR steel. The M.S. sheet adjustable tilting mechanism is designed with swivel max. Tilt. It is also provided with the upright lock facility to provide needed support. Mechanism to prevent the backrest from hitting the user when the lock is released. A full of 360-degree swivel mechanism allows fluid lateral movement. The gas lift is of 90-100 mm. The Telescopic bellow assay:- The bellow is 3 piece telescopic type and injection moulded in black polypropylene .The pedestal is injection moulded in black 30% glass filled Nylon. The pedestal shall be 690 mm +/- 10mm pitch dia. (740 mm +/- 10mm dia with castors). The twin wheel casters are made of nylon. Revolving chair with all necessary hardware & fittings etc. Overall Dimensions of Chair Width & Depth of Chair as measured from pedestal - Width-740mm and Depth-740mm. +/- 10mm.The entire M.S. sheet cutting should have through numerical control sheet metal cutting machine and the entire sheet metal banding should have through computerised numerical control sheet metal bending machine. All the metal parts have free from the dent, burrs and sharp edges. Removing of grease, rust should be done before Powder coating. The metal parts material is then oven baked with a controlled temperature of 180 deg. C to 200 Deg. minimum thickness of powder coated should be 40-50 microns. The manufacturing unit should be ISO 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, certified. all ISO certificates should be issued by national accreditation board for certification bodies (NABCB)/ quality council of India (QCI) (An autonomous body set up by ministry of commerce and industry) authorized agency. 90 2 Chair with Cushion Chair Type With Armrest Type of Seat and Backrest Padded with Polyurethane Foam Frame Type Cantilever 300 50 Baded TENDER DOCUMENT FURNITURE.docxF:\ALL TENDERS 2024-25\50 Baded Tender\50 Baded TENDER DOCUMENT FURNITURE.docx - 30 - Castors Without Material of Fabric Back Cover polyester Thickness of Plywood used in Backrest Frame Material CRCA ERW round pipe Material of Fabric of Seat Cover fabric Thickness of Plywood used in Seat 11(mm) 12 mm GSM/Thickness of Fabric +5 (Gram per Sq Meter) 220 Gram per Sq Meter Am Material CRCA pipe Thickness of Polyurethane Foam Used in Backrest IN MM (+/-3 mm) 50 mm Thickness of Polyurethane Foam Used in Seat IN MM (+/- 3 mm) 50 mm Size of Material (mm) 14 SWG 25 mm round pipe Chair Height (+5mm) 935 mm Seat Depth (+5mm) 450 mm Seat Width (+5mm) 500 mm Seat Height from floor surface (+5mm) 475 Backrest Width (+5mm) 490 mm Backrest Height from seat = (+5mm) 460 mm Arm Length (+5mm) 350 mm Arm Width (+2mm) 50 mm Paint Type - Chrome paint & paint color Black Warranty period in number of years1 3 Steel Almirah Small Product Size: 765mm (W) x 440mm (D) x 1270mm (H) excluding levellers. Construction & Material Welded construction. 0.8 mm thick CRCA for Shelf & 0.8 mm thick CRCA for all other components. It should have multi bend construction with interlocking design and full length over lapping doors and sides. The entire MS sheet cutting should have through NC sheet metal cutting machine and the entire sheet metal banding should have through CNC sheet metal bending machine. It should have three way bolting mechanism. The two doors should have hinge mounted on frame. The doors have one handle and lever locking mechanism with 6- Six lever Mazak Zinc Plated Lock. Shelving: Height wise Adjustable Shelves 3 Nos. Uniformly Distributed Load Capacity per full shelf is 80 Kg maximum. Leveler M10 Screw type leveler with hex plastic base. (add 10mm to unit height and additional 10mm for adjustment.). Lock and key. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stove enamellings to remove grease, rust, scale and any other foreign element through treated by phosphating process before Powder coating. The metal parts material is then oven baked with a controlled temperature of 180 deg. C to 200 Deg. minimum thickness of powder coated should be 40-50 microns. 120 4 Steel Almirah BIG Product Size: 900mm (W) x 450mm (D) x 1980 mm (H)+/-10 mm. excluding levellers. 0.8 mm thick +/-0.1 mm. M.S sheet for Shelf & all other components. It should have multi bend 90 50 Baded TENDER DOCUMENT FURNITURE.docxF:\ALL TENDERS 2024-25\50 Baded Tender\50 Baded TENDER DOCUMENT FURNITURE.docx - 31 - construction with interlocking design and full length over lapping doors and sides. The entire M.S. sheet cutting should have through numerical control sheet metal cutting machine and the entire sheet metal banding should have through computerised numerical control sheet metal bending machine. and wherever required MIG welding shall be done by robotic MIG welding machine. It should have three-way bolting mechanism. The two doors should have hinge mounted on frame. The door have one handle and lever locking mechanism with 6 lever lock. Shelving: Height wise Adjustable Shelves 4 Nos. Uniformly Distributed Load Capacity per full shelf is 80 Kg maximum. Lock and key. All the metal parts have free from the dent, burrs and sharp edges. Removing of grease, rust should be done before Powder coating. The metal parts material is then oven baked with a controlled temperature of 180 deg. C to 200 Deg. minimum thickness of powder coated should be 40-50 microns. Dimensions tolerance / variations shall be within +/- 10mm. The manufacturing unit should be ISO 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, certified. all ISO certificates should be issued by national accreditation board for certification bodies (NABCB)/ quality council of India (QCI) (An autonomous body set up by ministry of commerce and industry) authorized agency. 5 3 Seater Chair Steel 3 Seater Metal perforated Chair public place seating Chair of mild steel with arm. Material of main frame and Sheet and backrest - mild steel , Material of arms and leg - powder coated high pressure aluminium dye cast. Overall Size: Length - 1840mm x depth 400mm x height 450mm and Seat height from floor - 450mm. Color of powder coating- silver. All the metal parts have free from the dent, burrs and sharp edges, Is have pickled before stove enamellings to remove grease, rust, scale and any other foreign element through treated by phosphating process before Powder coating. 240 6 Big Steel Rack MS Steel Rack Size 2100 (height) X 900 (Width)X450(Depth) mm+/-10 mm. it should have 6 panels made of 1 mm+/-0.1 mm. thick. M.S. Sheet forming 5 compartments M.S. Angle size should be 40mmX40mm+/- 2mm. and 2mm +/-0.1 mm. thick having slot pitch of 23mm +/- 2mm. to accommodate shelves. Suitable corner plates on all and galvanized nut bolts should be used for stability. Entire M.S. sheet cutting should be done through numerical control sheet metal cutting machine for accuracy and entire sheet metal banding should be done though computerized numerical control sheet metal bending machine for accuracy. All metal parts should have no dents. Burrs and sharp edges the manufacturing unit should be ISO 9001:2015, 14001:2015, 45001:2018 and 50001:2018 certified. All ISO certifications should be issued by an agency authorized by the national board for certification (NABCB)/ Quality Council 150 50 Baded TENDER DOCUMENT FURNITURE.docxF:\ALL TENDERS 2024-25\50 Baded Tender\50 Baded TENDER DOCUMENT FURNITURE.docx - 32 - of India(QCI) ( an autonomous body set up by the ministry of commerce and industry) 7 Office Table General Size-1500 (W) X 750 (D) X 750 (H) mm ±20mm. Top made up of 18mm ±0.5mm thick pre laminate Particle board, edge duly sealed with 2mm ±0.2mm thick PVC edge beading. All the PVC edge beading should have press through 200 ° temperature hot melt glue by automatic through feed edge banding machine with corner rounding function. The modesty panels made of 0.8mm ±0.1mm thick M.S. sheet with perforation of Dia 2.5mm ±0.3mmon the sheet shall be uniform except 100mm ±20mmfour side border. The side panels made of 0.8mm ±0.1mm thick M.S. sheet. Leg of the table made up of 50mm ±3mm round M.S pipe with 1.2mm ±0.1mm thick. The entire M.S. sheet cutting should have through numerical control sheet metal cutting machine and the entire sheet metal banding should have through computerised numerical control sheet metal bending machine & the entire M.S. sheet perforation should have through metal perforated machine and wherever required MIG welding shall be done by robotic MIG welding machine. There shall be leveller provided at the bottom of leg. The Mobile pedestal shave one drawer and one shutter.pedestalssize-650 (H) x 400 (W) x 450 (D) mm ±10mm. Mobile pedestals are placed below table top. mobile pedestal side of drawer and facia made of 18mm ±1mmthickpre laminated particle board. Back of the pedestal & drawer bottom made of 9mm ±1mmPre laminated particle board. Pedestal drawer is provided with single extension telescopic ball bearing slide channels and Shutter is provided with hinges. Pedestal stand-alone and not supported to the table top. Pedestal is provided with handles for operating the drawer and shutter. All the metal parts have free from the dent, burrs and sharp edges. Removing of grease, rust should be done before Powder coating. The metal parts material is then oven baked with a controlled temperature of 180 deg. C to 200 Deg. minimum thickness of powder coated should be 40-50 microns. Dimensions tolerance / variations shall be within +/- 10mm. The manufacturing unit should be ISO 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, certified. all ISO certificates should be issued by national accreditation board for certification bodies (NABCB)/ quality council of India (QCI) (An autonomous body set up by ministry of commerce and industry) authorized agency. 90 8 Stool with Top Stainless Steel Overall dimension of the stool shall be 300 X 300X 500 (Height) mm +/- 10 Structure 4 leg is made of M.S. Round pipe 25 x 25 x 1.2 mm thickness and middle pipe is made up of Dia 50mm x 1.2 mm thickness. the seat shall be made of stainless-steel Diameter 300 mm with 1.4 mm thick ness. There Structure shall be shoes provided at the base to avoid scratches on the 24 50 Baded TENDER DOCUMENT FURNITURE.docxF:\ALL TENDERS 2024-25\50 Baded Tender\50 Baded TENDER DOCUMENT FURNITURE.docx - 33 - floor. All Structure metal parts have no dents, burrs and sharp edges. Grease and rust are removed before powder coating. The material of structure metal parts is oven baked at controlled temperature of 180°C to 200°C. Minimum thickness of powder coating is 40-50 microns. our manufacturing unit is ISO 9001:2015, 14001:2015, 45001:2018 & 50001:2018 certified. All ISO certifications are issued by an agency authorized by National Board of Certification (NABCB)/ Quality Council of India (QCI) (an autonomous body set up by the Ministry of Commerce and Industry). 9 Small Steel Rack 4 shelves shoe rack with open from all sides. The slotted angel 25 mm X 25 mm with 1.2 mm thickness , Grommets material - heavy duty rubber. Size of panel: Width of shoe rack -900mm, depth of shoe rack - 305 mm , height of shoe rack - 800 mm, distance between each shelves10mm - 160mm. All the metal parts have free from the dent. 60 10 Attendant Bench The attendant bench shall have 1500 (L) X 350 (w) X 450 (H). Top shall be made of 1mm thick CRCA sheet. The under structure shall be of tube Dia 25mm of 1.2mm thick CRCA pipe.There shall be shoes provided at the base to avoid scratches on the floor. The complete steel structure shall be constructed by welding and welding part should be done by robotic MIC welding. The entire metal sheet cutting of sheet should be done on numerical control operated machine to ensure accuracy of the cutting. and bending of sheet should be done on computerised numerical control operated machine to ensure accuracy of the bending. All the metal parts have free from the dent, burrs and sharp edges. Removing of grease, rust should be done before Powder coating. The metal parts material is then oven baked with a controlled temperature of 180 deg. C to 200 Deg. minimum thickness of powder coated should be 40-50 microns. The manufacturing unit should be ISO 9001:2015, 14001:2015, 45001: 2018 & 50001:2018, certified. all ISO certificates should be issued by national accreditation board for certification bodies (NABCB)/ quality council of India (QCI) (An autonomous body set up by ministry of commerce and industry) authorized agency.
|
