|
Tender For Special Repair To Bldg No To-64 & To-65 Of 22 Weu Under Ge 865 Ews, Leh ; 1 Surface excavation n.exc (not exceeding) 30 cmdeep and averaging 15cm in depth and getting out in hard/dense soil complete all as specified and directed. 2 Excavation over area in Hard/dense soil n exc 1.5m deep and getting out complete all as specified and directed. 3 Excavation over area in Hard/dense soilexc 1.5mbut n exc 3.0m deep and getting out complete all as specified and directed. 4 M&l for PCC type D2(1:4:8) using 40mm graded crushed stone aggregate as mass concrete and filling of foundation complete all as specified and directed. 5 M&L for Walling of random rubble stone masonry, uncoursed well bonded laid dryin retaining wall abutment and similar work complete all as specified and directed. 6 M&L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed. 7 M&L for PCC type B1 (1:2:4) using 20 mm graded crushed stone aggregate in coping, mass concrete complete all as specified and directed. 8 M&L for form work to soffits of suspended flat sabs such as roof slabs, floor slabs, landingsand similar works (smooth finished flat surface of cncrete) not exceding 200mm thick (Horrizontal or sloping) complete all as specified and directed. 9 M&L for form work to fair finshed edges of concreat flats, treads breaks in floors, window cills, concrete failings, openings in concrete walls, floor and roofs n.exc 20 cm wide and sides of RCC/PCC bands in walls,horizontal or sloping and similar work exc 10cm but n exc 20 cm wide complete all as specified and directed. 10 M&L for RCC type B1 1:2:4 (using 20 mm graded crushed stone aggregate ) in Slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. 11 M&L for mild steel TMT bars 10 mm dia and over, cut length, bent to shape required , includingcranking , bending spirallyfor hoopingfor coloumns, hooking endsand binding with and includingmild steel wire (annealed) not less than0.9mm dia or securing with clipsquality conforming to TMT bar complete all as specified and directed. 12 S and F 110mm PVC (SWR) pipes ISI marked single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. 13 S and F Vent PVC cowl 110mm ISI marked complete all as specified and directed. 14 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed. 15 Removing excavated soil material n.exc50m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed. 16 Supply only broken stone for loose filling, of gauge 80mm to 150 mm grade complete all as specified and directed. 17 Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed. 18 Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed. 19 S&F Powder Coated Anodised aluminium frame of standard section for doors, windows, ventilators , Partitions etc with double rebates including joining cleat for fixing etc. complete all as specified and directed.(minimum thickness of powder coating not less than 50 micron) 20 M&L for Powder coatedaluminium door shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, hinge type B-21 100mm long (3 no.) suitable handle (2 no.) (Glass / Wiremesh should be measured seperately) complete all as specified and directed.(Thickness of powder coating not less than 50 micron) 21 M&L for Powder coatedaluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.)(Glass / Wiremesh should be measured seperately) complete all as specified and directed.(Thickness of powder coating not less than 50 micron) 22 Supply and fixing ofpowder coated aluminium grill of 6mm thick thickness of powder coating not less than 50 micron with "F"/"U" type channel for windows complete all as specified and directed. 23 S&F sheet glass 4.8 mm thick ordinary quality and glazing with aluminium beeds in square not exc 0.50 sqm in each pane complete all as specified and as directed. 24 S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately) complete all as specified and directed. 25 S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides ,fixed to chowkats, complete all as specified and directed. 26 Dismantling wrought iron or mild steel work of any descripton not otherwise provided for complete all as specified and directed. 27 S&F MSframedwork such as grills, gratings etc with ends of bars shouldered and/or rivitedor forgedin spikes, framed guard bars, barrediron doors, leddersframed balsterswalk waysrailingsframe work of water tanksand similar workconfirming to Fe-290, Gde-E-165 complete all as specified and directed. 28 S&F mild steel butt hinges, medium weight cold rolled 100mm sizecomplete all as specified and as directed. 29 S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed. 30 S&F 100mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed. 31 S&F 300mm mild steel sliding door bolts plate type sove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate complete all as specified and directed. 32 S&F stainless steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed. 33 S&F aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutter of 851 mm to 1000 in width and of weight 61 to 80 kg complete all as specified and directed. 34 S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed. 35 S & F brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position complete all as specified and directed. 36 S&F in repair 19mm dia mild steel, chromium plated curtain rods,with brackets, end bulbs complete all as specified and directed. 37 S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling& fixing in the frame at site complete all as specified and directed. 38 S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed. 39 Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed. 40 Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etcunder 40 Sq.cm in secton complete all as specified and directed. 41 M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & liningfixed with nails exc 13 sqcm and n exc 25 sqcm in section complete all as specified and as directed. 42 M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section complete all as specified and directed. 43 M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and directed. 44 M&L 5mm thick printed PVC sheet in strips & channel feathered at edges for fixing on solid PVC wall lining, insulated PVC wall lining and solid PVCpartitioninclusive of solvent cement and fixing at site as per specifications and complete all as specified and directed. 45 S&F 5mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and directed. 46 M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and directed. 47 M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling complete all as specified and directed. 48 M&L for 5mm thick PVC plain sheet board for vertical surface of wall /partition of long last polymers fixed with screws complete all as specified and directed. 49 Dismantling boarding / wooden flooring of any description,fixed in any positon complete all as specified and directed. 50 M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated, including backing with thermocol sheets or as specified by manufacture complete all as specified and directed. 51 S & F anodised aluminium snap grid of size 605 x 605 frame work of false ceiling including hanger 6mm dia GI (up to 1200 mm length) adjusting level fixed to roof slabs by means of ceiling clearts made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed. 52 M & L for providing and fixing Gypsum board 12mm thick and 600 x 600 mm in size in ceiling fixed with screw or with staples on snap grid as per manufactured instructions complete all as specified and directed. 53 S & Fin repair One Piece EWC of size 690 x 390 x 770 mmwith built in Cistern Vitreous china wash down water closet (Pedestal), white (EWC) including Plastic seat of same colour of WC, closed patttern with flat bottom, and cover and Mild steel chromium plated hinging device fixed in repair connection to drain pipe and to flushing pipe antisyphonage pipe etc including PVC fitting P or S trap for 100mm bore of pipe fixed complete all as specified and directed.(Cat No S1013216 of make Cera or equivalent) 54 S &F in repairs Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. 55 S&F in repair curved shape urinal partition with frosted glass of 8-10mm thick (chamfer) of size 900 x 450 mm fixed wall including all acessories complete all as specified and directed. 56 M & L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:4 complete all as specified and directed. 57 S & F Vitreous china wash basin white flat back with pedestal size 550 x 400 mm including including CI brackets of angle iron 65 x 65 x 6mm embeded in PCC block with PCC 1:2:4 type B-1 & CP grating with holes fixed in repairs complete all as specified and directed. 58 S & F in repair 15mm bore pillar taps, fancy type cast copper alloy, with capstan heads, chromiumplated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. 59 S&F in repair 15mm bore CP central hole basin mixer without Popup waste system with 450mm long copper pipeschrome finish complete all as specified and directed. 60 S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. 61 S & F in repair chromium plated brass paper holder fixed with screws complete all as specified and directed. 62 S&F sinks made of stainless steel 1 mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. 63 S&F in repairs Soap dish Chromium plated complete all as specified and directed. 64 S & F in repair CP floor gratings 150mm dia complete all as specified and directed. 65 S & F in repair tubular towel rail, 20mm dia 600mm long of aluminium fixed and including chromium plated brass screw and wooden/plastic cleats (min weight 270gms) D type , complete all as specified and directed. 66 S & F in repairs hand shower (health faucet) with 1m long easy flexible tube in chrome finish & wall hook with accessories set complete all as specified and directed. 67 S&F in repair 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with cromium plated brass screws and cup washers complete all as specified and directed. 68 S & Fin repairs, PVC (SWR) 75mm dia, floor trap, plain with grating including jointing to waste pipe with solvent cement complete all as specified and directed. 69 S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet, ball valve, float bracket & flush pipe complete all as specified and directed. 70 S&F in repairs vitreous China squatting pan , Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern) but including connection to trap, anti syphonage pipe etc complete fixed in repair including bedding with PCC 1:2:4 type B-1 using 20mm grade stone aggregate complete all as specified and directed. 71 S & F in repair Vitreous china wash down water closet (Pedestal pattern), white (EWC) excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including connection to drain pipe and to flushing pipe antisyphonage pipe etc including cast iron P or S trap for 100mm bore of pipe fixed in repair complete all as specified and directed. 72 S&F in repairs Angle stop valves, cast copper alloy, screwed down high pressure with crutch or butter fly handle, fancy type, chromiumplated with long shank and cup (concealed type), 15mm bore dia of pipe , complete all as specified and directed. 73 S & F in repairs Fancy type 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. 74 S & F 25 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod& high density plastic ball screwed for iron pipe and fixed at position complete all as specified and directed. 75 S & F rotational moulded HDPE water storage tanks 1000 ltrs capacity and will be PUF insulated with 75mm thick PUF insulation of density 48 kg/Cum inner and out white two layers ISI marked ( cylindical vertical type/rectangular loft type closed top) hoisted hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes complete all as specified and directed. 76 Dismantling water tanks and removing to storeexc 500 and n exc 1000 ltrs capacity complete all as specified and directed. 77 S & F 25mm dia3 layer PP-R polypropyene random copolymer concealedpipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions complete all as specified and directed. 78 S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealedpipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions complete all as specified and directed. 79 Taking up or down 25/32 mm bore steel tubing / PPR pipe and connections and set aside for re-use or removal to store complete all as specified and directed. 80 S&F20 mm bore, PVC connection pipe 600 mm long with PTMT nuts at both ends complete all as specified and directed. 81 S & FCP toilet jet spary ABS with double lock 1.2 mtr CP tube stainless steel flexible hose complete all as specified and directed. 82 S & FCP towel ring of dia 20mmfixed with and includingscrews and wooden/plastic cleats (Min weight 90 gms) complete all as specified and directed. 83 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. 84 M & L 15 mm thick screed bed in cement mortar 1:4 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed. 85 M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles complete all as specified and directed. 86 M & L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed. 87 M & L glazed (coloured) ceramic tiles of size (350 x250mm) x7 mm / 450mm x 350mm x 7mm thick, as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement as in dado, skirting etc to matchwith the shade of tiles complete all as specified and directed. 88 M&L for vetrified ceramic tiles 10mm thick (lightshade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etcset and jointed in neat cement slurry and pointed in white or colouredcement to matchthe colourof tiles including 15mm thick screed bedin CM (1:4)for laying floor tiles complete all as specified and directed. 89 Dismantling of cast iron /PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed. 90 S&F 110mm dia bore PVC pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber ring joints , laid in trenches or in floors including PCC bed of standard depth in PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate)to drain complete all as specified and directed. 91 S&F110mm bore PVC (SWR) pipe bends ISI markedcomplete all as specified and directed. 92 S&F 75mm bore PVC (SWR) pipe single socketed having compressive strength 655 - 675 Kg/Cm2 , in any length with rubber joints fixed to walls complete all as specified and directed. 93 S&F 75mm bore PVC (SWR) pipe bends ISI marked complete all as specified and directed. 94 S&F PVC (SWR) T (Single T) of 110mm dia ISI marked complete all as specified and directed. 95 S&F PVC (SWR) T (Single T) of 75mm dia ISI market complete all as specified and directed. 96 Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. 97 M&L for 15mm thick renderingon other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:6 complete all as specified and directed. 98 M&L for 15mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 4 complete all as specified and directed. 99 M&L for preperation of new concrete /plastered surface of any description and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed. 100 M&L for preperation of new concrete /plastered surface of any description, applyingtwo coats of distemper oil emulsion over a coat of primer complete all as specified and directed. 101 M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and directed. 102 Dismantling plain or corrugated steel /fibre sheeting any guage thickness including nanital or similar pattern complete all as specified and directed. 103 S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers in roofs walls etc. with grade of zinc coating 275 GSM complete all as specified and directed. 104 S & F for Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zink coating 275 GSM complete all as specified and directed. 105 M & L for two coats of synthetic enamel paint over one coat of red oxide priming including preparation of steel surfaces over 10 cm width or grith not otherwise described 106 Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed. 107 M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonry exc 10cm in width with solid block masonry with solid blocks, exc.10cm in width and setting in cement mortar 1:6 complete all as specified and directed. 108 Demolition of un-reinforced cement concrete in ground floor and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. 109 M & L 75mm thick plain cement concrete 1:3:6 type C-2 (using 40mm granded crushed stone aggregated) as in plinth protection etc. finishing cement concrete surfaces even and fair without using extra cement complete all as specified and directed. 110 Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed. 111 M&L for precast cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slabs and the like position set in cement mortar 1:6 complete all as specified and as directed (reinforcement shall be measured & paid separately) complete all as specified and directed. 112 Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface complete all as specified and directed. 113 Taking down care fully sub main wiring/service wire of any description complete all as specified and directed. 114 Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth leadall as specified and directed for the followings:- 115 One light/exhaust fan point controlled by one way switch complete all as specified and directed. 116 One switch socket outlet 6 Amps, 230 volts point on same board complete all as specified and directed. 117 One switch socket outlet 6 Amps, 230 volts point on independent board complete all as specified and directed. 118 All as item No 114 above, but using cable 4 Sq mm size for power point ofswitch/ socket of 15 Amp complete all as specified and directed. 119 Supply and fix in replacement of lamp holder insulated body with back plate complete all as specified and directed. 120 Supply and fix in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as specified and directed. 121 Supply and fix in replacement ofSocket outlet two in one5 pin 6 Amps flush type 230 volts complete all as specified and directed. 122 Supply and fix in replacement of switch Socket combination outlet multi purpose 5 pin 6 Amps and 16 Amps 230 volts complete all as specified and directed. 123 Supply and fix in replacement of switch Socket combination outlet multi purpose 5 pin 6 Amps 230 volts complete all as specified and directed. 124 Supply and fix in replacement of Ceiling rose, surface Bakelite three terminals 230 V complete all as specified and directed. 125 Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB"s to be used single pole & neutral 240 Volts 8 ways with 200 Amp rated bush bar complete all as specified and directed. 126 Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB"s to be used single pole & neutral 240 Volts 4ways with 200 Amp rated bush bar complete all as specified and directed. 127 Supply and fix in replacement of MCB SPN 40 to 63 Amp 240 Volts 10 KA C-Curve, AC ISI marked all as specified and directed by Engr-in-Charge. 128 Supply and fix in replacement of MCB SP 6-32 Amp 10 KA C curve 240 Volts50 HZ complete all as specified and directed. 129 Supply and fix in replacementsheet metal enclosure Vertical Tripple Pole and Neutral DB 4 way 415 Volts complete all as specified and directed. 130 Supply and fix in replacement of MCCB TPN 160 Amp, 25 KA, Adjustable type 415 Volts AC ISI marked complete all as specified and directed. 131 M & L for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x4.0 sq. mm earth wire complete all as specified and directed. 132 Supply and Fixing in Replacement LED light fitting 1 x 20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rosecomplete all as specified and directed. 133 Supply and fix in replacement LED luminaire 600mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed. 134 Supply, fixing, connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protectioncomplete all as specified and directed. 135 M&L for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to galvanized earth lead wire 4mm dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 complete all as specified and directed.(4+2) 136 Supply and fixAir Circulator fan, steel body AC single Phase 230V of size 300mm sweep, 1350 RPM, copper winding motor with blades, and frame and louvers complete all as specified and directed. 137 Supply and fix in replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. mm, 3.5 core complete all as specified and directed. 138 Supply and fix in replacementXLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sq. mm, 3.5 core complete all as specified and directed. 139 M&L for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for laying UG cavble in trenches on plan and n exc 1.5 m in depth in Hard/ dense soil and getting out all as specified and directed.(71+60) 140 M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified and directed.Note : Punned thickness of 18 CM will be measured and paid. 141 Supply and layingof factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-2 flate size 250mm x 150mm x 40mm, complete all as specified and directed. 142 Supply and fixingbus bar chamber size 600x 450x 300 mm outdoor type made out of MS sheet 3.0 mm thick mounted on angle iron frame dully painted with two coat of synthetic enemelled paint over a coat of primer and comprising of three phaseand Neutral aluminum bus bar 200 amps mounted on insulators, and space bar to be provided for mounting of approx 25 Nos SPN / MCBincluding provisioning of foundation complete all as specified and directed. 143 S & F in replacement ofPP-R pipes PN 20/ SDR 11, 3 layer 40 mm dia bore with all fittings conforming to IS- 15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified and directed. 144 S & F in replacement ofPP-R pipes PN 20/ SDR 11, 3 layer 32 mm dia bore with all fittings conforming to IS- 15801 and fixed complete to walls and ceiling or laid in floors or trenches complete all as specified and directed. 145 Supply and fixingin replacement gun metal gate valve 40mm ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed. 146 Supply and fixingin replacement gun metal gate valve 25mm ISI marked cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed complete all as specified and directed. 147 S & F in replacement gate valve 32 mm conforming to ISO 9001- 2000 conforming ISO-15801 screwed down high pressure with crutch or butterfly handle screwed both ends for PP-R pipes or for union and fixed complete all as specified and directed.
|
