|
Saw For Pvc, Aluminum Or Anatomical And Rubberized Handle, Surface For 45° And 90° Markings, Professional Use, With 300Mm Saw (12) Type K148-12. Allows You To Change The Blade., Sae 1045 Carbon Steel Lever, Cylindrical, Smooth, With Heat Treatment On The Tip And Wedge Ends (Tempered), . Dimensions: 1.1/8 (Round) Length Of 1.80 M. The Material Must Comply With Article 31 Of The Consumer Protection Code, And Be Permanently Marked With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Considered Satisfactory., Tempered Tempered Stainless Steel Blade For Scissors For Cutting Hdpe Tubes Up To 32 Mm, All Aluminum Body, Simple Scissor System With Just One Axis, Without Ratchet Or Jaws., Cutting Scissors Of Hdpe Tubes Up To 32 Mm, Body Made Entirely Of Cast Aluminum, Drive Without Ratchet Or Jaws, With Removable Tempered Tempered Stainless Steel Blade, Tool That Allows The Blade To Be Changed, Opposite Side Of The Blade In Base, Cradle, Round, Suitable For Accommodating The Tube., 1 Kg Sledgehammer, Forged In Steel, According To Nbr 15872/2013; Head With Darkened Finish, Sanded Stops And Fixed With A Metal Wedge To The Handle; Machined Wooden Handle, Sanded And Polished, Free From Defects Such As Cracks, Porosities Or Burrs And Painted With Colorless Varnish. The Material Must Be Permanently Marked With The Name Or Brand Of The Manufacturer., 6 Kg Sledgehammer In Accordance With Nbr 10771, Forged And Tempered In Sae 1045 Steel, Free From Defects Such As Cracks, Porosities Or Burrs, Polished Surface And Anti-Corrosive Paint. Finished With Wooden Handle According To Nbr 10772, Absent Of Barks, Cracks, Ends Affected By Insects, Must Be Smoothed (Sanded) And Varnished. The Finishing Must Be Done Using A Metal Or Resin Wedge, Or With An Inverted Handle. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. Marking With Removable Material Will Not Be Considered Satisfactory., Forged Steel Bricklayers Hammer, Square Head And Base, Free From Defects Such As Cracks, Porosities Or Burrs; Polished Surface; Protection With Varnish Or Anticorrosive. Noble Wood Handle From 300Mm To 330Mm, Smoothed (Sanded), Varnished According To Nbr 10762 And Nbr 10768. ; Free From Peels, Cracks Or Spots Affected By Insects; Finishing With Metallic Or Resin Wedge., 500 G Ball Hammer, Steel Head With Sanded Ends, And Varnished Wooden Handle And Finishing With Metallic Wedge., Tool For Chamfering (Sharpener/Edger) Polyethylene (Pe) Tube Of 20 Mm, 32Mm Polyethylene (Pe) Tube Chamfering Tool, 25 Padlock Mm, With Solid Brass Body, Tempered Steel Rod, Self-Locking And Brass Key. With Double Lock System. The Material Must Be Permanently Marked With The Manufacturers Name Or Brand. Marking With Removable Material Will Not Be Satisfactory., 40 Mm Padlock, Self-Locking And Brass Key. With Double Lock System. The Material Must Have A Permanent Marking With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Satisfactory., 50 Mm Padlock, Two-Leaf Articulated Digging Shovel Forged In Steel, Quenched And Tempered, Anti-Corrosive Paint, Colorless Varnish And Wooden Handle. Measuring 1.50M. The Material Must Have A Permanent Marking In Low Relief With The Name Or Brand Of The Manufacturer. Marking With Removable Material Will Not Be Considered Satisfactory., Wide Hoe, Length (A) Of C
|
