Bids Are Invited For Register Of Furniture Prices In General For The Secretariat Of Education in Brazil

Work Detail

Round Table For 5 Seats 1000 , 2Mm, Textured, Semi-Matte, E Anti-Reflection.-High Structural Supporting Pentagolnal (05 Feet) Carbon Steel Tube In Oblong Shape 58 Oblong Tubes Must Have A Face Of 29 Mm For Part View Of Table Top. Fixing To The Table Top Must Be Done Using M6 Screws In American Bushings Embedded In The Table Top. Painting Of Metallic Elements In Epoxy / Polyester Hybrid Powder Paint, Electrostatic, Polymerized In An Oven., Round Meeting Table 1200 X 745 Mm -Dimension: 1200 X 745 Mm D ) 25 Mm, Coated On Both Sides With Low Pressure Melamine Laminate (Bp). Glued With 2.5 Mm Edge Tape, By Hotmelt Process.-Type X Metallic Structure With 04 Legs With Printed Lower Base Without Tips In Steel Sheet Measuring 440 Mm In Diameter, Thread 5/16 In Each Printed Base; Laser-Machined Structure, Star Shape Allowing Perfect Alignment Of The Five Bases. X-Shaped Upper Base Made Of Rectangular Steel Tube Of 50 X 20 Mm And 1.06 Mm Thick To Support The Top. Vertical Column In Round Steel Tube 4 And 1.50 Mm Thick. The Vertical Column Is Fixed To The Upper And Lower Base Using A 5/16 Screw And Threaded Bar. The Entire Fixing System Uses Metric Screws And Metal Inserts, Which Allow Assembly And Disassembly Of The Furniture Without Causing Damage To It, Without The Use Of Screws Directly On The Mdp Panels., Rectangular Table 1200 X 700 X 740 Mm - Dimension 1200 X 740 Mm.-Made Top In Mdp, And Covered In Low-Pressure Textured Melamine Film On Both Sides, 25 Mm And 18 Mm Front Panel. Finished In Maple Tape Extruded In Polymeric Material And Glued To The Top And Panel, With A Minimum Thickness Of 2.5 Mm. Side Feet With Upper Base In Steel Tube, Rectangular Shape, 1.20Mm Thick For Greater Support; End Holes For Attaching The Foot To The Top. Vertical Column In Folded Steel Sheet Measuring 665X 200 X 48 Mm With 1.20 Mm Thickness; Holes In The Upper Part Of The Column To Pass Wiring From The Top To The Floor, With A Semi-Circle Radius Of Approximately 30 Mm In The Lower Part; Removable Side Cover For Access To Cabling, Made Of 0.90Mm Thick Steel. Printed Lower Base, Without The Use Of Tips, Measuring 580 X 65 X 25 Mm High, 1.5 Mm Thick; Two Grooved Leveling Shoes, Injected In Polypropylene Of At Least 30 Mm In Diameter, M6 Thread In The Color Of The Structure; Application Of Rivetsm6 To Join The Feet To The Single Panel. The Entire Fixing System Uses Metric Screws And Metal Inserts, Which Allow The Furniture To Be Assembled And Disassembled Without Causing Damage To It. Accessible Table With Height Adjustment - Approximate Dimensions: 1200 X 700 X 630 To 930 Mm -Accessibility Table With Height Adjustment.-Top Made Of Mdp 25 Mm Thick, Coated On Both Sides With Thermal Film

Contact Information