|
Repair And Maintenance Of Steel And Wooden Furniture Including Painting Of Certain Items Of Furniture Held With Icgs, Icgas Ratnagiri And Ge I Cg Ratnagiri-REPAIR TO CHAIRDINING (FD - 279 , FD-357) 2 (a) Removing taking out carefully existing unserviceable broken back leg of the chair diningof any description in any position& replacement of the same with new back leg of Ist class hard woodmade to shape, fixed in position all as shown on drawing spefcified and directed. 3 (b) All as per item No.1(a) here-in-before but for front leg. 4 (c ) All as per item No. 1(a) here-in-before but replacement of side rail with Supply and Fixing new side rail made out of Ist class hard wood with holes for weaving.The spacing of holes shall match with the existing rail on other side. 5 (d) All as per item No. 1(a) here-in-before but replacement of front and back rail with Supply and Fixing new front or back rail made out of Ist class hard wood with holes for weaving.(The spacing of holes shall match with the existing rail on other side). 6 (e ) All as per item No 1(a) above but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood complete all as shown on drawings. 7 (f) All as per item No. 1(a) here-in-before but replacement of back strip with Supply and Fixing new back strip made out of Ist class hard wood complete all as shown on drawing. 8 (g) All as per item No. 1(a) here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring under the leg, superior quality with steel screw of size 20mm long complete all as shown on drawings and directed. 9 REPAIRSTO CHAIR WRITING ( FD - 280) 10 (a) Removing/taking out carefuly of old existing unserviceable/broken back leg ofchair writing of any description, in any position & replacement of the same with new back leg made of Ist class hard wood made to shape, fixed in position all as shown on drawing, polishing of new existing portion, specified and directed. 11 (b) All as per item No. 2(a) here-in-before but for front leg 12 (c ) All as per item No. 2(a) here-in-before but for replacement of side rail with Supply and Fixing new side rail made out of Ist class hard wood with holes for weaving.The spacing of holes shall match with the existing rail on other side. 13 (d) All as per item No. 2(a) here-in-before but replacement of front and back rail 14 (e ) All as per item No. 2(a) here-in-before but replacement of back strip with Supply and Fixing new back strip made out of Ist class hard wood complete all as shown on drawing and directed. 15 (f) All as per item No. 2(a) here-in-before but replacement of Arm rest with Supply and Fixing new arm rest made out of Ist class hard wood complete all as shown on drawing and directed. 16 (g) All as per item No. 2(a) here-in-before but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood complete all as shown on drawings and directed. 17 (h) All as per item No.2(a) here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring of superior qualaity under the leg with steel screws of size 20mm long complete as shown on drawiwng and directed. 18 REPAIRS TO CHAIR EASY (FD - 229) 19 (a) Removing/taking out carefuly of old existing unserviceable/broken back leg ofchair Easy of any description, in any position & replacement of the same with new back leg made of Ist class hard wood made to shape, fixed in position all as shown on drawing, polishing of new existing portion, specified and directed. 20 (b) All as per item No. 3(a) here-in-before but for front leg 21 (c ) All as per item No.3(a) here-in-before but for replacement of seat side rail with Supply and Fixing new side rail made out of Ist class hard wood (teack wood) with holes for weaving.The spacing of holes shall match with the existing rail on other side. 22 (d) All as per item No.3(a)here-in-before but replacement of seat front and back rail. 23 (e ) All as per item No. 3(a) here-in-before but for replacement of back side rail with Supply and Fixing new back side rail made out of Ist class hard wood (teack wood) with holes for weaving.The spacing of holes shall match with the existing rail on other side. 24 (f) All as per item No. 3(a) here-in-before but replacement of back top and bottom rail. 25 (g) All as per item No.here-in-before but replacement of Arm rest with Supply and Fixing new arm rest made out of Ist class hard wood complete all as shown on drawing and directed. 26 (h) All as per item No. 3(a) here-in-before but replacement of stiffener with Supply and Fixing new stiffener made out of Ist class hard wood complete all as shown on drawings and directed. 27 (i) All as per item No. 3(a) here-in-before but replacement of rubber ring with Supply and Fixing new hard rubber ring of superior qualaity under the leg with steel screws of size 20mm long complete as shown on drawiwng and directed. 28 REPAIR TO TABLE DRESSING GENTS (FD - 379) 29 (a) Dismentalling/taking out carefully brokentop ofexisitingtable dressisng gents of any description in any position and replacement of the same with Supply and Fixing new top of table using12mm thick prelaminated particle board one side laminated and other white balancing, exterior grade BWP with inclusing 6mm thick teak wood beading all round made to shape fixed in position all as shown on drawing specified ,polishing of new existing portion directed. 30 (b) All as per item No. 4(a) here-in-before but side with Supply and Fixing new side of 12mm thick particle board one side teak veneered and other side commercial, exterior grade, BWP with and including 6 mm thick teak woodbeading all round, made to shape, fixed in position complete. 31 (c ) All as per item No. 4(a) here-in-before but bottom with Supply and Fixing new 12mm thick veneered particle board commercial BWP grade. 32 (d) All as per item No. 4(a) here-in-before but mirror with Supply and Fixing new mirror havingsize 380mm x 760mm x 5mm thick. 33 (e ) All as per item No. 4(a) here-in-before but back frame with Supply and Fixing new back frame made out of 45 mm x 40mm teak wood member and 6 mm thick commercial ply grade BWP grade. 34 (f) All as per item No. 4(a) here-in-before but back ply Supply and Fixing new 900 mm x 380mm x 12mm thick ply one side teak veneered and other side commercial. 35 (g) All as per item No. 4(a) here-in-before but knob with Supply and Fixing new chromium plated knob 25 mm dia, 24 mm length of best quality as directed. 36 (h) All as per item No. 4(a) here-in-before but drawer with Supply and Fixing new drawer. 37 REPAIR TO TABLE DINNING 4 PERSONS (FD/E6/MAP-II/03) 38 (a) Dismantling taking out carefully and replacement of old existing broken top of table dining 04 persons of any description in any position and replacement of the same with Supply and Fixing new top of table of 18 mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade BWR with and including 6mm thick tak wood beading all round made to shape, fixed inposition all as shown on drawing, polishing of new existing portion specified and directed. 39 (b) All as per item No. 5(a) here-in-before but leg with Supply and Fixing new teak wood leg. 40 (c) All as per item No. 5(a) here-in-before but long rail with Supply and Fixing new teak wood long rail. 41 (d) All as per item No. 5(a) here-in-before but short rail with Supply and Fixing new teak wood short rails. 42 (e) All as per item No. 5(a) here-in-before but stiffener with Supply and Fixing new teak wood stiffener. 43 (f) Provisionof rectangular bracket with Supply and Fixing new teak wood bracket of size 100 mm x 100 mm x 35mm thick made to shape fixed in position, all as shown on drawing specified and directed. 44 REPAIR TO TABLE DINNING 6 PERSONS (FD/E6/MAP-II/03, FD-269, FD-30(M) & FD-273) 45 (a) Dismantling taking out carefully and replacement of old existing broken top of table dining 06 persons of any description in any position and replacement of the same with Supply and Fixing new top of table of 18 mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade BWR with and including 6mm thick tak wood beading all round made to shape, fixed inposition all as shown on drawing, polishing of new existing portion specified and directed. 46 (b) All as per item No. 6(a) here-in-before but leg with Supply and Fixing new teak wood leg. 47 (c) All as per item No. 6(a) here-in-before but long rail with Supply and Fixing new teak wood long rail. 48 (d) All as per item No. 6(a) here-in-before but short rail with Supply and Fixing new teak wood short rails. 49 (e) All as per item No. 6(a) here-in-before but stiffener with Supply and Fixing new teak wood stiffener. 50 (f) Provisionof rectangular bracket with Supply and Fixing new teak wood bracket of size 100 mm x 100 mm x 35mm thick made to shape fixed in position, all as shown on drawing specified and directed. 51 REPAIRS TO TABLE CENTRE (FD - 274, FD - 375 , TP) 52 (a) Dismantling/ taking out carefully and replacement of old existing broken top of Centre table of any description in any position with supply and fixing new top of centre table18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directed. 53 (b) All as per item No. 7(a) here-in-before but leg with supply and fixing new teak wood leg. 54 (c ) All as per item No. 7(a) here-in-before but long rail with Supply and Fixing new teak wood long rail. 55 (d) All as per item No. 7(a) here-in-before but short rails with Supply and Fixing new teak wood short rails. 56 (e ) All as per item No. 7(a) here-in-before but stiffener complete (long and short). 57 REPAIRS TO TEAPOY FD (FD - 382) 58 (a) Dismantling/ taking out carefully and replacement of old existing broken top of teapoy FD of any description in any position with supply and fixing new top of teapoy FD 18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directed. 59 (b) All as per item No. 8 here-in-before but leg with supply and fixing new teak wood leg. 60 © All as per item No. 8 here-in-before but long rail with Supply and Fixing new teak wood long rail. 61 (d) All as per item No. 8 here-in-before but short rails with Supply and Fixing new teak wood short rails. 62 (e ) All as per item No. 8 here-in-before but stiffener. 63 REPAIRS TO PEG TABLE (FD - 384, FD-277) 64 (a) Dismantling/ taking out carefully and replacement of old existing broken top of Peg Table of any description in any position with supply and fixing new top of table of 18mm thick pre-laminated particle board, one side laminated and other side white balancing, exterior grade, BWR with and including 6 mm thick teak wood beading all round made to shape, fixed in position, all as shown on drawing, polishing of new existing portion specified and directe 65 (b) All as per item No. 9 here-in-before but leg with supply and fixing new teak wood leg. 66 © All as per item No. 9 here-in-before but long rail with Supply and Fixing new teak wood long rail. 67 (d) All as per item No. 9 here-in-before but short rails with Supply and Fixing new teak wood short rails. 68 (e ) All as per item No. 9 here-in-before but stiffener. 69 REPAIRS TO TABLE WRITING (FD - 275) 70 (a) M & L for removing unsv top of table by S & Fnew top made out of 18/19 mm thick pre laminated particle board one side white and other side decorative choice lamination exterior grade including well seasoned teak wood edging free from cracks and knots shall be provided all around the top all as directed and as shown on drawing. 71 (b) M & L for removing unsv door shutter of table by S & Fdoor shutter made out of 18/19 mm thick pre laminated particle board exterior grade ISI marked of required shade including well seasoned teak wood edging 4 mm thick free from cracks and knots duly french polished after preparation of surface shall be provided all around the top all as directed and as shown on drawing. 72 (c) M & L for removing unsv hinges of table by S & Fnew CP piano type hinges of superior all as shown on drawing (as per sample). 73 (d) M & L for removing unsv long rail of table by S & F new long rail made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. 74 (e) M & L for removing unsv stiffener of table by S & Fnew stiffener made out of 1 st class well seasoned teak wood free from cracks and knots all as shown on drawing. 75 (f) M & L for removing unsv hard rubber shoe of table by S & Fnew hard rubber shoe of superior quality as per sample approved all as directed. 76 (g) M & L for removing unsv CP knob/Handle of table by S & Fnew Handle SS 75mm (as per sample)of superior quality as per sample approved all as directed. 77 (h) M & L for removing unsv drawer table by S & Fnew drawer including Handle SS 75mm (as per sample)of superior quality all as shown on drawing and as specified. 78 CHAIR WRITING (FD-280), CHAIR DINNING (FD-279, FD-357) &CHAIR EASY(FD-229)Taking old worn out cane and M&L for re-canning of chairs wooden/steel (any type), in Godrej pattern with 2.0mm wide, 0.4mm thick and beading with 4mm wide half round white plastic cane all as specified and shown on drawing. 79 SOFA SET 04/05 SEATER (FD-281, FD/E6/MAP-II/02, TP) 80 (a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density all as specifed shown in drawing and as directed. . Note : Single cushion seat&back shall be measured as one unit. 81 (b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S & F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip for easy removal as per sample held with BSO. all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.Note : Tapestry cloth for single seat&back shall be measured as one unit. 82 (c) Preparation of old decorated / new replaced parts /surface of sofa set fiveseater smoothening by required grade of sand paper and applying one or more coats of french polish to achieveglossy finish including tightening the frame work all as specified shown in drawing and as directed. 83 SOFA SET 03 SEATER (FD-281) 84 (a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density all as specifed shown in drawing and as directed. . Note : Single cushion seat&back shall be measured as one unit. 85 (b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S & F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip for easy removal as per sample held with BSO. all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.Note : Tapestry cloth for single seat&back shall be measured as one unit. 86 (c) Preparation of old decorated / new replaced parts /surface of sofa set three seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieveglossy finish including tightening the frame work all as specified shown in drawing and as directed. 87 SOFA SET 01 SEATER (FD-281) 88 (a) M&L removing Old unserviceable cushion of sofa seat/back and S&F New 100mm thick cushion (cool foam) 40 density all as specifed shown in drawing and as directed. . Note : Single cushion seat&back shall be measured as one unit. 89 (b) M&L removing old faded Tapestry cloth from seat/back cushion of sofa Set and S & F new tapestry cloth of best quality not less than Rs 384/- per metre with a zip for easy removal as per sample held with BSO. all as specifed shown in drawing and as directed. Colour&Pattern of Tapestry Cloth will be as directed by Engineer-in-Charge.Note : Tapestry cloth for single seat&back shall be measured as one unit. 90 (c) Preparation of old decorated / new replaced parts /surface of sofa set Single seater smoothening by required grade of sand paper and applying one or more coats of french polish to achieveglossy finish including tightening the frame work all as specified shown in drawing and as directed. 91 Dressing Mirror Gents (FD/E6/MAP/16) 92 (a) M&L for removing of unsv mirror of table by S & F new sheet glass electro-copper plated mirror 5mm thick all as shown on drawing. 93 (b) M & L for removing unsv back plywood of frame by S & Fnew back made out of 12mm thick commercial plywood BWP grade ISI marked as as shown on drawing. 94 (c) M & L for removing unsv glass shelves with glass holder of table by S & Fnew 5 mm thick plain glass of superior quality with glass holder all as specified and as directed. 95 (d) M & L for removing unsv hinges of table by S & Fnew CP piano type hinges of superior quality all as shown on drawing and as specified. 96 (e) M & L for removing unsv magnetic catcher by S & Fnew magnatic catcher of superior quality as per sample approved all as shown on drawing and as specified. 97 (f) Preparation of old decorated / new replaced parts /surface of dressing mirrorgentssmoothening by required grade of sand paper and applying one or more coats of french polish to achieveglossy finish including tighting the frame work all as specifed shown in drawing and as directed. 98 Trolly for TV:- Dismantling unserviceable components of TV trolley and reset the TV trolley as per existing Drg No. FD/E6/MAP/04 99 (a) S&F broken glass shutter for TV trolley by providing hinges and closing/opening magnet 100 (b) Replacement of unsv top of TV trolley with 18 mm thick prelaminated particle board as per existing including 4 mm thick teak wood beading all around. 101 (b) Removing of old broken custer wheel and S&F new custer wheel as per existing 102 Hat Stand with Mirror (FD - 233(M), FD-361, FD-362, FD-351) 103 (a) M&L for removing old unsv mirror with frame by S & F new 5mm thick electro-copper plated mirror ofincluding 1 st class well seasoned teak wood beading free from cracks and knots all as shown on drawing and as specified. 104 (b) M&L removing old unsv brass pegs from frame by S & F brass pegs of superior quality of size 120 x 75 mm with brass screw as per sample approved all as specified and as directed. 105 (c) Preparation of old decorated / new replaced parts /surface of hat stand with mirror smoothening by required grade of sand paper and applying one or more coats of french polish to achieveglossy finish including tighting the frame work all as specifed shown in drawing and as directed. 106 TABLE DRESSING LADIES INCL STOOL (FD/E6/MAP-II/07, FD-378) :- 107 (a) Supply and fixing in replacement of old unserviceable Mirror, shall be of 5 mm thick duly 1st Class Hard Wood teak frame and 6 mm thick plywood BWR on back side all as per drawing.Make of Mirror shall be of Modiguard/Atul/Saint Gobbain 108 (b) Supply and fixing in replacement of old unserviceable Top, shall be of 18 mm thick prelaminated particle board one side laminated and other side balancing white, exterior grade ISI Marked of existing colour and pattern as approved with 4 mm thick 1st class hard wood teak beading with width equal to thickness of board all as per drawing and as directed. 109 (c) Supply and fixing in replacement of old unserviceable Bottom shall be of 12 mm thick prelaminated particle board one side laminated and other side balancing white, exterior grade ISI Marked of existing colour and pattern as approved with 4 mm thick 1st class hard wood teak beading with width equal to thickness of board all as per drawing and as directed. 110 (d ) Supply and fixing in replacement of old unserviceable SS handle, shall be of 50 mm lond "D" shape all as per drawing. 111 (e) Supply and fixing in replacement of old unserviceable 2 Nos telescopic aluminium channel, all as per drg. 112 (f) Supply and fixing in replacement of old unserviceable back side plywood all as per drg. 113 (g) M & L for removing unsv cushion alongwith tapestry cloth from seat of stool by S & F new 50mm thick cushion of 32 densitycovered with Tapestry cloth as per sample approved shall be provided all as shown on drawing and as specified. 114 (h) M & L for removing unsv plywood seat of stool including by S & F new 12 mm thick BWP grade commercial plywood ISI markedall as shown on drawing and as specified. 115 TABLE BED SIDE:- The following repairs shall be carried out to Table Bed Side after removing old unserviceable parts as per Drg No. (FD-276, FD/E6/MAP(15(R)) 116 (a) Remove and replace of old unserviceable top with new top of pre-laminated particle board 18 mm thick interior grade all as specified and directed. 117 (b) Repair and replace old unserviceable side with new side pre-laminated particle board 18 mm thick teak face all as specified and directed. 118 © Repair and replace old unserviceable bottom of the tablewith new bottom pre-laminated particle board 18 mm thick all as specified and directed 119 (d) Repair and replace old unserviceable shelfwith new shelf, pre-laminated particle board 18 mm thick all as specified and directed. 120 (e ) Repair and replace, old unserviceable back with new back, plywood 6 mm thick commercial qualityall as specified and directed. 121 Side board:- Removing of the following U/S components of side board and providing new components as specified and shown on Drg No. FD-371/241/1112 122 (a) Replacement of doors with 18 mm pre-laminated particle board interior grade one side with natural teak wood veneer including butt hinges and knobs complete. 123 (b) Drawer for table replaced with pre-laminated particle board on one side 18 mm thick with teak wood edging 4 mm thick all as directed. 124 © Bottom of drawer made out of 6 mm thick plywood commercial and fitted in drawer frame 125 (d) Side rail of drawer made out of 1st class hardwood (teak) 126 (e ) Knobs chromium plated 35 mm with bolt and nut 127 (f) Back of side board with 6 mm thick plywood commerical as specified in drg. 128 (g) Top and two sides of board with 4 mm thick plywood teak finish 129 (h) Legs of side board made out of 1st class hardwood (teak). 130 REPAIRS TO TABLE COMPUTER(DRG NO FD/E6/ MAP/03, TP) 131 (a) S&F in replacement top of 18mm thick BWR grade IS 303 plywood (Make : Greenply/Archid Ply/Century Ply) coveredwith 01 mm thick laminated sheet on top of existing colour (Make : Greenlam/Merino/Century ply) with all edges of plywood covered with 04mm beading all round fixed to frame with suitable size screws and cup washers complete all as specified in drawing and directed. 132 (b) S&F in replacement Drawer of size and shape as per drawing along with two telescopic chanel of best quality and shade complete all as specified in drawing and directed. 133 (c )S&F in replacement mouse pull out tray of size and shape as per drawing along with two telescopic channel of best quality and shape complete all as specified in drawing and directed. 134 (d) S&F in replacement key board tray of size and shape as per drawing along with two telescopic channel of best quality and shape complete all as specified in drawing and directed. 135 BIN LINEN MULTIPURPOSE (FD/E6/MAP/09) : Repair of the following unserviceable Components of Bin Linen Multipurpose, including removing of old unserviceable parts without disturbing to the other parts, made to shape & size of well seasoned 1st Class Hard Wood teak as shown in drawing, complete all as specified and directed. 136 (a) Supply and fixing in replacement of old unserviceable top, shall be of 18 mm thick prelaminated particle board one side laminated and other side balancing white, exterior grade ISI Marked of existing colour and pattern as approved with 4 mm thick 1st class hard wood teak beading with width equal to thickness of board complete all as per drawing and as directed 137 (b) Supply and fixing in replacement of old unserviceable sides, shall be of 18 mm thick prelaminated particle board one side laminated and other side balancing white, exterior grade ISI Marked of existing colour and pattern as approved with 4 mm thick 1st class hard wood teak beading with width equal to thickness of board complete all as per drawing and as directed 138 (c ) Supply and fixing in replacement of old unserviceable back sides made of 6mm thick plywood commercial as per drawing. 139 (d) Supply and fixing in replacement of old unserviceable shutter, shall be of 18 mm thick prelaminated particle board one side laminated and other side balancing white, exterior grade ISI Marked of existing colour and pattern as approved with 4 mm thick 1st class hard wood teak beading with width equal to thickness of board complete with piano type hinges medium weight and 100mm long 8mm dia chrome plated handles and magnetic catchers all as per drawing and as directed. 140 (e ) Supply and fixing in replacement of old unserviceable drawer (Front of drawer shall be made of existing pattern or as directed and sides made out of 12mm thick well seasoned 1st class hardwood teak planks and bottom of the drawer shall be made of 6mm thick plywood BWR grade) & drawer shall be provided with 2 x Nos of 12 inch stainless steel telescopic channel all as per drawing. 141 (f) Supply and fixing in replacement of old unserviceable handles 100mm long 8mm dia chrome plated all as per drawing and as directed. 142 (g) Supply and fixing in replacement of old unserviceable magnetic catcher all as shown in drawingand as directed. 143 M&L for polishing for the following wooden furniture including preparation/cleaning of old polished surfaces by scraping with fine abbressive cloth and applying two coats of french/spirit polish of the existing shades all over the wooden exposed surfaces as directd by Engineer-In-Charge :- 144 (a) Chair Writing (FD-280) 145 (b) Chair Dining (FD-279, FD-357) 146 © Chair Easy (FD-229) 147 (d ) Peg Table (FD-384, FD-277) 148 (e) Table bed side (FD-276, FD/E6/MAP-II/15(R)) 149 (f) Side board (FD-371) 150 (g) Table Dressing Ladies incl Stool (FD/E6/MAP-II/07, FD-378) 151 (h) TV Trolly (FD/E6/MAP/04) 152 (i) Table writing (FD-275) 153 (j) Teapoy (FD-382) 154 (k) Table Centre (FD-274, FD-375, TP) 155 (l) Table Dining 6 Persons (FD/E6/MAP-II/03, FD-269, FD-30(M), FD-275) 156 (m) Table Dining 4 Persons (FD/E6/MAP-II/03) 157 (n) Table dressing gents (FD-379) 158 (o) Bin linen Multipurpose (FD/E6/MAP/09) 159 REPAIR TO CHAIR VARANDAH (FD - 359) Taking out old worn out cane from chair varandah and welding the broken joints and applying two coats of paint synthetic enamel white by hand brush over a well prepared surface and recaning the same with 4 mm wide 0.6mm thick half round white plastic cane complete as specified and directed. 160 REPAIR TO CHAIR REVOLVING STEEL /CHAIR REVOLVING SENIOR EXECUTIVE / CHAIR COMPUTER REVOLVING(DRG NO FD/E6/ MAP/01, TP) 161 (a) S&F in replacement cushion seat made of 75 mm thick, 40 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed. 162 (b) S&F in replacement cushion back made of 50 mm thick, 40 density cushion covered with approved quality tapestry cloth complete all as specified in drawing and directed. 163 (c ) S&F in replacement heavy duty Hydraulic assembly/lifting assemblyfor height adjustment complete all as specified in drawing and directed.Make Godrej or equivalent 164 (d) S&F in replacement PVC castor wheel complete all as specified in drawing and directed. 165 (e ) S&Fin replacement base assembly (load bearing capicity of 120 Kg) complete all as specified in drawing and directed. Make Godrej or Equivalent 166 (f) S&F in replacement PVC handle any type & shape as per existing complete all as specified in drawing and directed. 167 REPAIRS TO ALMIRAH LARGE/SMALL (FD-1031, FD-1032, FD/E6/MAP/16 & TP) 168 (a) S&F of handle steel Chromium plated of size 100mm long with 25mm long steel pin to make 3 way locking system fully operational including removing of unserviceable handle steel from Almirah steel of any size or type complete all as per specified and directed. 169 (b) S&F of three way locking device to making the system fully operational including removing of unserviceable locking system of Almirah steel of any size complete all as per specified and directed. 170 (c) S&F of Lock six livers, brass of best pattten, with duplicate keys and including removing unserviceable lock from Almirah steel of any size or type complete all as per specified and directed. 171 (d) S&F of Clips for fixing of shelves, including removing unserviceable clips from Almirah steel of any size or type complete all as per specified and directed. 172 (e) Repairs to door as specified including replacement of Hinges of almirah steel small / large all as perspecified and directed. 173 (f) M&L for preparation of old painted surfaces by rubbing down with emery paper without damaging the existing coat, clean throughly to remove all dust/oily sport etc and applying one coat of synthetic emanel paint olive green with spray gun all side for Almirah small / large steel all as specified and directed. 174 (h) S&F shelves of MS sheet 1.00 mm thick of existing size and shape including applying a coat of red oxide primer and including removing of unserviceable shelves from Almirah steel. 175 REPAIR TO CHARPOY WITH HARD TOP (FD/E6/ MAP/8( R), FD/MAP-II/01) Removing the existing unserviceable Plywood from charpoy and tighting of the frame of charpoys and supply and fixing of 12mm thick ply wood commercial, BWR grade ISI Marked of size 1980mm x 900mm and rounded edges on four corners with nuts 6mm dia 75mm long with washers (3mm thick duly drilled 10 holes per charpoy) (03 each on both long rails and 02 Nos of each on both short rails) and fixing complete including S & F 02 Nos flat iron 40mm width x 5mm thick x 880mm length to be placed over long rails (Flat iron to be placed between plywood and long rails and to be fixed with be same bolt and washers mentioned above). The ends of flat iron should be gound smoothly and apply two coat of enamel paint black over a coat of metal primer for entire flat iron all as specified and directed. 176 Chair CB Steel with Arms and without Arms FD- 75(M) 177 ( a )Removing / taking out carefully of old existing unserviceable / broken seat of chair CB Steel with Arms of any description, in any position & replacement of the same with new seat duly canning, cane shall be 2mm wide and 0.4mm thick gola type, wooden surfaces of seat shall be painted with high gloss black paint. Wood for seat shall be made first class hard wood (teak wood) complete all as shown on drawing and directed, painting of new existing portion , by Engineer - in - Charge. 178 b) All as per item No. 28(a) here-in-before but unserviceable / broken back of chair CB Steel with Arms. 179 c)All as per item No. 28(a) here-in-before but unserviceable / broken seat of chair CB Steel with out Arms. 180 d) All as per item No. 28(a) here-in-before but unserviceable / broken back of chair CB Steel with out Arms. 181 (e) All as per item No. 28(a) here-in-before but unserviceable/broken Arm rest of chair CB Steel with Arms. 182 (f) supply and welding of iron rod of 1 cm dia support from seat to bottom frame at both ends of chair CB steel with arms complete as driected by Engineer-in-Charge 183 (g) Preparing the old painted surfaces of the chair CB with or without arms by removing old paint and touching up with red oxide primer where necessary and denting wherever necessary,andapplying two coats of paint synthetic enamel Olive Green colour by hand brush over a well prepared surface. 184 COMPUTER TABLE 4" X 2" (TP), FD/E6/MAP/03 185 (a)Taking out defaced surface and welding of broken portion and matching the surface by applying synthetic enamel paint of existing of colour and shape including preparation of surfaces as directed by Engineer-in Charge. 186 (b) Taking out unserviceable top from table and Supply and Fixing new top made of 18mm thick particle board fixed with nuts and bolts duly fixed with 1mm thick laminated sheet complete all as shown on drawing, specified and directed by Engineer-in-Charg 187 (c)Taking out unserviceable Keyboard trolly and channel from table and Supply and Fixing newKeyboard trolly and channel made of 18mm thick particle board fixed with nuts and bolts duly fixed with 1mm thick laminated sheet complete all as shown on drawing, specified and directed by Engineer-in-Charg 188 Preparing the old painted surfaces of the following steel furniture by removing old paint and touching up with red oxide primer where necessary and denting wherever necessary,andPainting with one coat of synthetic enamal paint as per existing colour of articles with spray gun complete all as specified and directed by Engr-In-Charge :- 189 (a) Rack Shoe Steel (DRG NO FD/E6/ MAP/02(R)) 190 (b) Rack 6 tier steel(DRG NO FD-1038) 191 (c ) Table office officers steel (DRG NO FD-1003) 192 (d) Table office Clerk steel (DRG NO FD-1004) 193 (e)Bed hard steel (DRG NO FD/E6/ MAP/8( R), FD/MAP-II/01) 194 (f) Teapoy Verandha (DRG NO FD/E6/ MAP/17) 195 (g) Chair school with handboard(DRG NO FD/E6/ MAP/05 )
|
