|
Aviation Kerosene – Purchase Of Jet-A1 Aircraft Fuel. Jet-A1 Aircraft Fuel Purchase Basic Quantity: 2,000 Tons Option + 30%, I.E. 600 Tons The Applicant Undertakes To Call For 70% Of The Basic Quantity, 1,400 Tons. The Jet-A1 Fuel To Be Procured Must Be Suitable For Meeting The Fuel Needs Of The Airbus A320 Family Of Aircraft Flying To Debrecen International Airport In Large Numbers And Other Aircraft Equipped With Engines Of The Above Technology. The Winning Bidder Must Guarantee That The Product It Serves Meets The Requirements Of The Relevant Msz 10870:2012 Standard And The Jig Afqrjos (Issue 32 – Nov 2020) Product Specification Publication Product Name: Jet-A1 Exterior: Clean, Transparent, Shiny, Free From Contamination And Free Of Settled Water Visual Color: Colorless To Pale To Straw Yellow Acid Value, Max.: 0.015 Mg Koh/G Aroma Content, Max.: 25 % (V/V) Mercaptan Sulfur Content, Max.: 0.003 % (M/M) Total Sulfur Content, Max.: 0.30 % (M/M) Distillation Characteristics: • Distills 10% (V/V), Maximum: 205 °C • Final Boiling Point, Maximum: 300 °C • Distillation Residue, Maximum: 1.5% (V/V) • Distillation Loss, Maximum: 1.5% (V/V) Flash Point, Closed Space, Minimum: 38 °C Density At 15 °C: 0.775-0.840 G/Cm3 Crystallization Point, Maximum: -47 °C Kinematic Viscosity At -20 °C, Maximum: 8.0 Mm2/S Calorific Value, Minimum: 42.80 Mj/Kg Non-Scorching Flame Height, Minimum: 25 Mm Non-Scorching Flame Height, Minimum: 19 Mm Naphthalene Content, Maximum: 3.0% (V/V) Corrosive Effect On Copper Plate (2 Hours/100 °C°), Maximum: 1 Corrosion Degree Thermal Stability: • Pressure Drop On The Filter, Maximum: 3.3 Kpa • Deposit On The Heating Pipe, Maximum: 3 Degrees Actual Resin Content, Maximum: 7.0 Mg/100 Cm3 Microseparation Index (Msep-A): • With Conductivity Improvement Additive, Minimum: 70 • Without Conductivity Improvement Additive, Minimum : 85 Electrical Conductivity At 20 °C: 50-600 Ps/M Solid Pollutant Content, No More Than: 1 Mg/L The Bidder Must Check The Quality Requirements By Applying The Quality Control Procedures Specified In The Msz 10870:2012 Standard, Which Are Specified In The Standards Assigned To The Individual Fuel Quality Criteria. The Use Of Additives Of The Type And Quantity Specified In The List Below Is Permitted. Antioxidant: 17-24 Mg/L Additive To Improve Electrical Conductivity, Maximum: 3.0 Mg/L Additive To Improve Electrical Conductivity, Including Additives Added During Storage And Transportation, Maximum: 5.0 Mg/L Metal Deactivator, After Production, Maximum: 2.0 Mg/L Metal Deactivator, Including Additives Added During Storage And Transport, Maximum: 5.7 Mg/L More Details K.D.
|
