|
Bids Are Invited For 1 Surface dressing and Leveling of the ground by available Soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m .All kinds of soil 4896.00 Sqm 2 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means for all Depth including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in charge. All kinds of soil and tree trunks 398.00 Cum 3 Providing and laying in position Ready mix Plain cement concrete of specified M-7.5 grade - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 20/40 mm nominal size derived from natural sources) including Supply of all Material, Labour and T&P etc Complete.(Prefer Cement Make - Ultratech, Ambuja Cement, J.K. Cement, Jaypee Cement,) 307.00 Cum 4 Providing and laying design mix cement concrete of M-30 grade, in roads/taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 20 mm nominal size in appropriate proportions as per approved & specified design criteria, providing and fixing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer in-charge (Item including joint fillers, sealants, no extra paid for such Item) Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer Complete.(Prefer Cement Make - Ultratech, Ambuja Cement, J.K. Cement, Jaypee Cement,) 50.00 Cum 5 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Below plinth level and Superstructure. -ThermoMechanically Treated bars of grade Fe-500D or more. (Make - SAIL, Tata Steel, RINL, JSW, Jindal Steel & Power Ltd., Shayam Steel) 1945.00 kg 6 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer in- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). (Make- Sample approved By Engineer in Charge after Testing of Sample) 33.00 Cum 7 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of Fine sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (Make- Sample approved By Engineer in Charge after Testing of Sample) 2240.00 Sqm 8 Providing and applying of alkyd based Paint on Kerb of required colour to give an even shade :Two or more coats including Supply of all Material, Labour and T&P etc Complete. (Make –Indigo,Nerolac,Asian) 136.00 Sqm 9 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge 15.00 Sqm 10 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). 15.00 Sqm 11 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including Supply of all Material, Labour and T&P etc Complete. 2.00 Cum 12 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. -Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 2.00 Cum 13 Providing and fixing of 150/160 mm dia P.V.C Pipe including bend ,shoe, Coupler and fittings including supply of material ,Labour and T&P etc Complete.-150 mm dia Pipe (Make - Astral, Supreme, Ashirwad) and Suitable for Laying in Ground below road. 250.00 Rmt 14 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 20.00 Nos 15 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) in Foundation and UP to Plinth. 14.00 Cum 16 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, Column Padestal etc. for mass concrete. 80.00 Sqm 17 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) Including supply of all Material, Labour T&P etc Complete. 7.00 Cum 18 Providing and applying plaster of 12 mm cement plaster 1:4 cement Coarse with neat cement Punning in Inside of Chamber and top including supply of all Material, Labour and T&P etc Complete. 141.00 Sqm 19 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Make -Apollo, SAIL, Tata Steel, RINL and JSW, Jindal Steel & Power Ltd and Similar approved by Engineer in charge) 9939.00 kg 20 Painting with synthetic of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Make –Nerolac,Asign) 488.00 Sqm 21 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Including Cornor Sheet for Locking of Both Vertical and Horizontal Sheet) (Make - Ezydeck of TATA, Lloyd Super deck, JSW / Jindal) 1057.00 Sqm 22 Providing and fixing 3.5 mm Thick Poly Carbonate Sheet For Natural Lighting Purpose in Store including Supply of all Material , Labour and T&P etc Complete. (Make - GE Plastic, LEXAN, Bayers) 45.00 Sqm 23 Cutting chases in brick masonry walls for Profile sheet Fixing and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand)-75 mm dia for Sheet Fixing. 87.00 Rmt 24 Cutting Brench of tree upto required height with cleaning of Outside periphery of Tree and Stacking Branch of Tree in Scrap Yard or as per Engineer in Charge. 10.00 Nos 25 Brick work Without Brick (Old bricks shall be supplied by the department free of cost) designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) Including supply of all Material ,Labour T&P etc Complete Total Quantity : 22181
|
