|
Tender For Provision Of Bathroom Cum Toilet Complex At Stn Hq Samba.; 1 Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable materialfrom the work site ouside defence premises complete all as specified. 2 Surface dressing n.exc 30cm in deep and averaging 15cm deep and getting out. 3 Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc and getting out in hard & dense soil, Complete all as specified. 4 Returning/filling in trenches in layer n"exc 25 cm thick including watering well ramming etc. 5 Removing excavated soil to distance n"exc 50 mtr and deposited as directed by Engr-in-Charge. 6 M&L PCC (1:4:8) type D-2 using 40mm graded stone agg as in fdn filling mass concrete. 7 M&L for 40 mm thick DPC to horizontal or vertical surfaces including necessary form work PCC 1:2:4 type B-0using WPC @ 3 % of cement by weight [ Integral WPCshould be measured and paid separately. 8 S&F 10mm dia and over deformed TMT bars as in reinforcement,cut to length bent to shape including cranking bending etcandbinding with MS wire annealed not less than 0.90m dia. Or securing with chip with dep quality confirming FE 500/FE 500D 9 Ditto, but 5mm dia and over upto and incl 10mm dia as in stirrups. 10 RCC M-25 design mix using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors roofs slabetc. 11 M&L of brick work withsub class"B" burnt bricks straight or curved on planexc. 6 m mean radius bult in CM 1:6 complete all asspd 12 M&L of brick work withsub class"B" burnt bricks straight or curved on planto any radius in half brick thick walls bult in CM 1:6 complete all asspd & dir. 13 M&L for 10 mm thick renderingon fair faces of brick work or concrete surfaces in CM 1:6 and finished even and fair without using extra cement, complete all as specified. 14 M&L rendering 15 mm thick in CM 1:4on fair/unfair faces of brick work or concrete surfaces finished fair & even without using extra cement completle all asspd & dir. 15 M&L 5mm thick plastering on ceillingconcrete surfaces in cm (1:3) even and smooth w/o using extra cement. 16 M & L Sand filling under floors or in foundations including watering and consolidation 17 M&L 75 mm thick type C-2, 1:3:6 cement concrete in sub base of floor 18 M & L for 25 mm thicK PCC M-15 (nominal Mix) Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in sub base of floor. 19 M&L non skid coloured ceramic tiles 7 to 8mm thk(square/rectangular joint free) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6, complete all as spd. 20 M&L glazed coloured ceramic tiles in vertical surfaces of wall of size 350x 250x 7mm/ 450X 350X 7mm/450X 300X 7mmthick set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4on brick /concrete surfaces complete all as spd & dir. 21 Providing and fixing factory made PVC internal UPVC (rigid) door frame of the size 50mm x95mm with a wall thickness of5mm, made out of extruded 5mm thick, PVC sheet of density 600kgs/cbm manufactured by an ISO-9000 certified company, mitre cut at two corners and joined with 4 nos of 150mm long brackets of 15mm x15mm M.S. square tube of 19 guage through out the frame .The door frame shall be fixed to the wall using 65/100mm long M.S. screws through the frame by using anchor fasteners.A minimum of 4 nos .of screw to be provided for each vertical member & minimum 2 nos. for horizontal membersetc. complete as per manufactures specification and direction of Engr-in-charge. 22 S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified. 23 S&F Aluminium handle 150 mm long cast type anodised, complete all as specified and directed 24 S&F Aluminium tower bolt 200 mm long, anodised barrel tower bolts of extruded section complete all as specified. 25 S&F Butt hinges 100 mm medium weight stainless steel complete all as specified and directed 26 S&F Powder Coated Aluminium door shutter including frame of hollow section 101mm x 44.00mm xthickness not less than 1.53 mm including aluminium anodized powder coated of hollow section glazed shutter of stiles size 85mm x 44.45mm xthickness not less than 1.56mm having grooves for aluminium beading and top rail of hollow section 83.5mm x 44.45mmxthickness not less than 1.50mm, lock rail of hollow section 83.5mm x 44.45mm xthickness not less than 1.50mm and bottom rail of hollow section 114.3mm x 44.45mmx thickness not less than 1.50mm ,one derived handle 300mm long,100mm long butt hinges or aluminium floor type hydraullic door closer, aluminium mortice lock 65mm 4 levers of Godrej make and glazing with select quality tinted glass 5mm thick or panelling with ACP sheet and cleat rubber packing aluminium beading including aluminium hardware fitting complete all as specified and as directed by Engr-in-Charge and approved by GE 27 Material & labourfactory made steel ventilators double shutter box type, outer frame made out of ERW TUBE "P" section (60x45x25mm) and shutters of ERW TUBE "P" section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of "Z" section as specified complete with sash bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-324/07 1/3 to 3/3 all as specified and directed by Engr-in-Charge.NOTE: The quoted rate against the above item shall also include (i) 04 Nos MS Steel lugs of 20x5mm MS flat 20cm long over all welded to frames (ii) PCC block for embedding lugs. 28 S&F figured sheet glass , ordinary quality 4.00 mm thick and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as spd 29 Preparationofnew steel surfaces and applying two coats of sythetic enamel paint over a coat of red oxide 30 S& Fixing Vitreous china Single piece-WC with EF soft close seat cover hinges,fixing accessories set and cistern fittings size 660x365x765 mm S-trap 300mmwith integral foot restincluding all joints and making good to the floor,etc complete all as specified 31 S & F Vitreous China Urinal, Half stall type with sensor , white (excluding flushing cistern, flush pipe and waste pipe complete all as spd & dir. Make: Cera Kenso cat part No.A4010101 32 Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 20 mm bore pipe, including making connections complete all as specified and fixed. 33 Supply and fixing in repair Gun-metal, globe or gate valves, with iron wheel head,screwed both ends for iron pipe of 15 mm bore pipe, including making connections complete all as specified and fixed. 34 S&F Rotational moulded polyethylene water storage tanksof capacity 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position including all necessary connections all as specified in SSR Part I, complete all as specified 35 20 mm bore ball valves high pressure of PTMT with epoxy coated Aluminiumrod& highdensity plastic ball screwed for iron pipe and fixed , complete all as specified. 36 S&F in repair C.P. Angle stop valve, fancy type, 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions complete all as specified 37 S&F in repair PVC connection 15mm dia, 450mm long with brass nut complete all as specified 38 M&L for three coats of white washincl preparation to new plastered surfaces of wallcompleted all as spd & dir. 39 M&L for three coats of white washincl preparation to new plastered surfaces of ceiling completed all as spd & dir. 40 M&L for two coats of cement based paints incl preparation to newly plastered surfaces of walls etc completed all as spd & dir. 41 M&L for hard core (broken stone) of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface. 42 M&L for PCC 1:3:6 type C-2(using 20 mm graded cr. stone aggr),75mm thick as in plinth protection finished even and smooth without using extra cement layed in bays not exc. 2.00m and joints filled with bitumen sand mastic with ratio (1:3 )complete all as spd & dir. 43 S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coulourhaving tensile strength of 550 Mpa as in roof coveringfixed with self tappingscrews as specified. 44 S&F Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, flat, hollow sections) including distance pieces, cleats, welding/rivets/nut/bolts/washer etc, complete all as specified. 45 S&FPVC (SWR) pipes 150mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified 46 M&L Concrete bed todrain pipes 150 boreincluding packing under, and completely surrounding pipes with concrete after they are laid and tested; in cement concrete type D-2, 1:4:8, Complete all as specified.(The Rate include cost of concrete bed and necessary form work) 47 S&FPVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified 48 S&FPVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified 49 PVC (SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified 50 S&F PVC (SWR) 110mm bore bends any radius, complete all as specified 51 S&F PVC (SWR) 75mm bore bends any radius, complete all as specified 52 S&F PVC (SWR) 110mm bore bends any radius with access door, complete all as specified 53 S&F PVC (SWR) 75mm bore bends any radius with access door, complete all as specified 54 S&F in repair C.P Brass grating with hole 150mm dia as per sample to be fixed with white cement all as specified. 55 Supply and fixing 20 mm nominal outer diaChlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge. 56 Supply and fixing 25 mm nominal outer diaChlorinated Polyvinyl Chloride (CPVC) pipes SDR 11, having thermal stability for hot & cold water supply, including all Plain CPVC SDR 11 fittings & brass threaded fittings on walls/ceiling or laying in floors,including fixing the pipe with clamps. This includes jointing of pipes & fittings with one step CPVC solvent cement, complete as per direction of Engineer in Charge. 57 Cutting chases,pining in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades ,shelves,lintels,etc.; and cutting chases for concealed water tubing or concealed conduit,wiring,etc,and making good cutting not exceeding 10 cm girth in brick walls. completeall as spd & dir. 58 S&F in repair Bib Cock with wall flange cast copper alloy, chromium plated fancy type ,complete all as specified. 59 S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available all as per directed and specified. 60 Supply and fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 61 S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flangescomplete all as specified. 62 S&F in repairstainless steel Shop dishholder complete all as specified. 63 S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.", complete all as specified. 64 S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long . Complete all as specified. 65 Supply and fixing in repair for bevelled edge mirror of size (900x750mm), selected quality glass approved size , mounted on 6 mm thick AC building board or commercial plywood with pvc moulding and fixed to wooden plugs with SS screws and cup washers 66 S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470x190, Oval shape, including CPWaste Coupling and PVC waste pipe complete all as specified. 67 M&L 20mm thick Granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,allas directed by Engr-in-charge. 68 Pressed steel cup board frameof MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats includingbutt hinges 100 mm long. Piano hinges measured separately. 69 Prelaminated MDF board 19 mm thick as in shutters/shelves (exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame worknincluding lipping (15 mm thick three sides and 20 mm thick lipping hinge side) around the shutter complete all asspecified and as directed by Engr-in-Charge. 70 Use and waste of formwork to fins, louvers, facias etc for fair finished surfaces of concrete, complete all as specified & directed 71 Use and waste of formwork to sofit of suspended slab roof landing and similar work not exe 20mm wide and sides od PCC/RCC bands exc 10 cm but not exc 20cm wide fair finished. 72 M&L for point wiring using FRLS PVC insulated unsheathed /multistranded copper conductor cable 1.5 sq mm drawn through and including PVC Conduitmarked and of appropriate size as specified, fixed in surface of wall/ceilingwith mild steel sunken box and bakelite sheet 3 mm thick including all fittings such as tees, bend and junction boxes etc complete for following:- Make of Cable :-Havells/Polycab or equivalent Make of Conduit:-As per IS 73 a)One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing) 74 b)One 5 Amp socket outlet on independent board. 75 c) One 5 Amp socket outlet on same board. 76 All as per Item Srl No1 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing). 77 S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar complete. 78 S&Fin replacementSPN 40 to 63 Amp, 10KA, 240 Volts. 79 S&Fin replacement MCB SP 5 to 32 Amp, 10KA, 240 Volts. 80 S&F Switch piano, flush type 5 Amp, One Way. 81 S&F socket outlet2-in-1, 3 pin 5 Amp. 82 S&F Switch piano, flush type 15 Amp, . 83 S&Fsocket out let 2 in 1, 5 & 15 Amp flush type. 84 S&F ceiling rose 3 terminal size 50*65 mm surface type. 85 S&F LEDLights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 86 S & Replacement for angular typeLamp holder PVC policarbonate type with back plate complete all as specified " 87 Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion. 88 Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 ltr complete with all acessories such as safety valve,thermostate,NRV,connection piece etc. 89 S& F Exhast fan made of sturdy engineering plastic complete with louvers shutter,voltage 230,50 hz,RPM 1200,Copper winding of sweep 300mm. Make Bajaj, Khaitan, Havells Standared 90 S& F LED Street light fitting 35 watt 230 v AC out door type with high pressure die complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. 91 Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtr in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. 92 Returning filling in including spreading, levelling, and well ramming, in layers not exceeding 25 cm each layer of any kind of soil. 93 Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding1.5 mtr above the starting point. 94 M & L for Sand cushioning for cables all as specified in 19.75 of SSR Part-I. 95 Material and labour for sub class B brick old size covering laid dry ,flat transversely along the length of cable on sand cushioning with width eqal to the length of the brick complete. 96 Supply, fixing & laying GI pipe light grade 50mm bore in trench, under floor, wall and on pole for cable protection. 97 Supply and laying 1100 volts gradePVCinsulated heavy duty armoured multistrandedaluminium conductor cable of size6Sqmm 2.0 corein trenches, through pipe, under culvert or in air complete all as specified and directed. Note:- Earthing work, Sand cushioning and Brick shall be measured and paid separately 98 Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.
|
