Request For Quotation Products (Mask, Respirators, Etc.) in Kazakhstan

Work Detail

1). Anti-Aerosol Respirator; 2). Respiartor Gas Dust Protection, A Mask For Brawlers. Characteristics Of The Delivered Product: The Quality Of The Electric Welders Shields Must Meet The Necessary Requirements Of Gost 12.4.254-2013 System Of Standards And Labor Safety. The Shield Of The Electric Welder For Welding Should Have A Folding Screen. The Headband Is Adjustable In 5 Positions, The Mask Comes Complete With A Protective Lens 90X110 Made Of Mineral Glass With A Degree Of Dimming. Full Face Protection Provides Protection For The Eyes, Chin, Neck, Ears And Head, Allowing You To Fight In Various Positions. The Dimensions And Configuration Of Shields And Masks, In Particular, The Height, Width And Depth Of The Mask Should Be At Least 300, 220 And 150 Mm, Respectively. The Depth Of The Upper And Lower Visors From The Front Wall Should Be At Least 50 Mm. The Mass Of The Mask Should Not Exceed 600 Grams. Shields And Welding Masks Are Equipped With Protective Light Filters, Which Are Externally Covered With Colorless Glass To Protect The Light Filters From Metal Splashes. From The Inside, The Light Filter Is Covered With Colorless, Unbreakable Glass To Protect The Welders Eyes And Face From Damage By Fragments In Case Of Accidental Damage To The Cover Glass And Light Filter. The Cover Glass Is Replaced With A New One As It Becomes Dirty., 1. Safety Glasses From Mechanical Effects With A Coating From Zopetovaniya For Boiler Room Workers; 2). Safety Glasses For Construction Work., Plastic Helmet For Electricians: Designed To Ensure Human Safety When Performing Work Operations At Height. Characteristics: Protective Helmet Made Of Plastic. Density 1.02-1.08 G/Cm 3, Tensile Strength 35-40 Mpa, Compressive Strength 46-80 Mpa. Protects Against Electrocution Up To 440 V. Operating Temperature Range From -50 To +50 S. Headband With Ratchet Mechanism And Adjustable Chin Strap. Combines With Various Accessories: Headphones, Face Shields, Helmet Pads. Compliance With Gost 12.4.128.83. The Products Provide Protection Against Industrial Noise, But Distinguish Speech And Danger Signals. Headphones Can Be Used Together With Helmets Of Other Models. They Are Intended For Protection Of The Hearing Organ At An Ambient Temperature Of -50 To +50 Gr/S In Production Premises And On Open Areas. Protection Of The Hearing Organ From Noise With A Level Of No More Than 115 Db. Group A.

Contact Information