|
Tender For Provision Of Srw And Minor Work At Age B/R-I And Age E/M Under Ge Babina.; 1 Demolition of PCC/lime concrete (Other than Ground flooors) terracingincluding felt in any description and in any position over roof etc complete all as specified and as directed by the Engineer-in-Charge. 2 M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. 3 Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. 4 M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed. 5 M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. 6 M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately as supply only. 7 Supply only integral water proofing compound complete all as specified and as directed. 8 MM&L applying water proofing treatment with the following(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane. 9 Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed. 10 Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed. 11 Supplying, fixing, jointing and testing galvanised iron tubing 15mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. 12 Supplying, fixing, jointing and testing galvanised iron tubing 20mm dia medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. 13 Fixing only old steel tubing and connections obtained from taking down against item No 9 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings of 15mm dia borecomplete all as specified and as directed. 14 Fixing only old steel tubing and connections obtained from taking down against item No 9 herein before in new or old position fixed to wall, ceiling or laid in floor with new fittings of 20mm dia borecomplete all as specified and as directed. 15 Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed. 16 Dismantling water tanks and removing to store of steel/PVC of capacity 500 ltr but not exceeding 1000 ltrs complete all as specified and directed. 17 S&F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I. 18 Fixing only old rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I 500 ltrs capacity including dismantling existing complete all as specified and as directed. 19 S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed 20 S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. 21 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. 22 M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) completeall as specified and as directed. 23 M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in Skirting etc set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc and including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tiling etccompleteall as specified and as directed. 24 M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.06sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) completeall as specified and as directed. 25 M&L for joint free glazed coloured tiles 350x250x7mm/450x350x7mm thick for work on vertical surface, set & jointed in cement slurry and pointed in white or coloured cement to match etc including rendering 10mm thick on fair faces of wall or conc surfaces in CM 1:4 finished rough for wall tilingcomplete all as specified and as directed. 26 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick in CM(1:6) etc complete all as specified and as directed. 27 Demolition of PCCin any description and in any positionetc complete all as specified and as directed. 28 M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed 29 M&L for 50mm thick cement concrete type B2, 1:2:4 (40mm graded aggregate) as in floor/hardstanding finished even and smooth without using extra cement complete all as specified and directed. 30 M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. 31 M&L 60 mm thickness M-40 Grade , machine pressed precast concrete Inter locking paver blocksany shape & size with grey cement and pigment conf to IS-15658-2006laid dry oversand cushion.(Sand cushion shall be measured and paid separately)complete all as specified and as directed. 32 Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. 33 M & L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed. 34 M&L, Brick work with sub class ;B; bricks old size half brick thickstraight or covered on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed. 35 Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. 36 M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed 37 M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. 38 M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of wall, surface finished even and smooth finish without using extra cement onconc/brick surfaces in CM 1:4, complete all as specified and as directed 39 M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. 40 M & L for Preparation of new plastered surfaceof wall and applying two coat of OBD over a coat of putty complet all as specified and as directed. 41 M & L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer completeall as specified and as directed. 42 Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed 43 Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. 44 Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each complete all as specified and as directed. 45 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge. 46 S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete complete all as specified and as directed. 47 S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed 48 S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed 49 S & F butt hinges medium weight cold rolled, mild steel and fixed 100 mm size etc complete all as specified and as directed. 50 S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet for PVC doors etc complete all as specified and as directed. 51 S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. 52 S&F Pressed steel frames for doors(125x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed. 53 S&F Pressed steel frames for doors(105x60) mmwith one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed etc complete all as specified and as directed. 54 Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. 55 M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggt) as in filling in holes of hold fasts and back filling of chowkats complete all as specified and directed. 56 M & L for secound class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed. 57 S&F 18/19 mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and as directed. 58 S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed. 59 S&F of 35mm thick 2nd class Hard wood paneled door shutter factory made (two panel) with lock rail andpanel of 9mm thick BWP commercial ply wood, the size of rail and stile is as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and as directed. 60 S&F factory made fabricated 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed 61 S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. 62 M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed 63 S&F of CRC sheet box type steel window/vrntilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. 64 S&F of CRC sheet box type steel window with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and as directed. 65 S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. 66 S&F of CRC sheet box type steel ventilator with steel handle, and steel peg stay, complete with out glazing bars, dovetailed or welded complete all as specified and as directed. 67 M&L framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 complete all as specified and as directed. 68 S & F3 mm thick sheet glass, Ordinary quality and glazing with putty in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. 69 S & F3 mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and as directed. 70 M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of rex oxide primer over 10 cm width or girth complete all as specified and as directed. 71 M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. 72 S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindware with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. 73 S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white Make :- Hindwarwith inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. 74 S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and as directed. 75 S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 76 S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. 77 S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flangecomplete all as specified and as directed. 78 S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. 79 S&F in repair 15mm bore fancy type chromium plated bib cock long body with flangeetc complete all as specified and as directed. 80 S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixedall as directed. 81 S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. 82 S & F CP Towel ring, complete all as specified and directed 83 S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed. 84 S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed. 85 S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed. 86 S&F in repair 25 mm dia chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. 87 Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and as directed. 88 S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. 89 S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. 90 S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. 91 S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. 92 S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. 93 S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. 94 S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. 95 S&F MS chromium plated peg set of five fixing with wall complete all as specified and as directed. 96 M&L for 100mm internal dia Salt-glazed stoneware drain pipes laid in trenches and joints complete all as specified and as directed. 97 M&L for type D-2 (1:4:8) concrete bed to drain pipes including packing under, and hunching against the side of pipe after they are laid and tested, in 100mm dia pipe complete all as specified and as directed. 98 Excavation in trenchesfdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and as directed. 99 Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed. 100 Removing excavated at a level n.exc 50m m above the starting pointcomplete all as specified and as directed. 101 M & L for complete removal of existing treatment from surface ofwall all as specified and as directed by the Engineer-in-Charge 102 M & L for applying one coat of putty all as specified and as directed by the Engineer-in-Charge 103 M & L for applying two coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge 104 M&L Preparing old decorated surfaces of walland applying two coats cement base paintall as specified and as directed. 105 M&L, Preparing old plastered/unplastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. 106 M&L, Preparing old plastered/unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed. 107 Demolition of Reinforced Cement Concrete ofRoofs,floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work completed all as specified and directed by Engr-in-Charge. 108 S&F Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. 109 M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings, kitchen slab, cover slabs (for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces complete all as specified and as directed. 110 M&L for 10 mm thick rendering in cement mortar 1:4 on sunken surface finished even and fair complete all as specified and as directed. 111 M & L for application of one coat of water based bitumen emulision primer @ 0.3 lit per sqm including cleaning of surface thoroughly from dust &dirt.Lay water proofing treatment with polymetric memberane 3 Kg/ sqm standard consisting of 90 micron, HMHDPE torch on memberane over a coat of blown bitumen 85/25 @ 1.2 Kg/sqm on top of memberane and providing 25 mm thick sand cushioning to recieve lean concrete in sunken floor complete, all as directed and as specified. 112 Material and Labour for PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed. 113 S&F 1000 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. 114 M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:4) completeall as specified and as directed. 115 S&F Factory Made Solid PVC Moulded Door Shutter With Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed and specified by Engineer-in-Charge. 116 S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made 117 S&F vitreous china wash down water closet pan of pedestal pattern with seat cove and P or S traps including connecting to trap and to flushing pipe etc making good to floor complete all as specified & as directed. 118 S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 480 x 400 x 150 mm size(counter top)including cutting for and pinning ends of brackets or erecting stand and waste pipe complete all as specified and directed. 119 S&F vitreous china urinal full stall type of min size 465x355x265mm(including flushing cistern, flush pipe and waste pipe) including connection to flushing pipe and outgoing pipes complete all as specified and directed. 120 S/Fbrass chromium plated health faucetfor EWC screwed down to GI tubing/fittings 15mm dia incl 1200mm long stainless steel connection complete all as specified and directed. 121 S&Ftoilet paper holder chromium plated fixed to wall with CP brass screws complete all as specified and as directed by the Engineer-in-Charge 122 S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cmlong between fllanges complete all as specified and as directed. 123 Dismantling of CI soil, rain water pipes, cast and vent pipes of any dia, any pattern including all fittings complete all as specified and as directed. 124 S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe(minimum weight 60 gms) complete all as specified and as directed. 125 S&F Soap dish chromium plated any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. 126 Supply and Fix pre-painted galvatume alumn zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 M pa as in roof covering , fixed with self tapping screws, complete all as specified and as directed. 127 M&LPCC 1:4:8 type D2 using 40mm graded stone agg as in filling and mass concrete, Sub base/flooring complete all as specified and directed. 128 M&L for Machine cutkota stone slab flooring 20-25mm thick over cement screedbase laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. 129 M&L for Machine cutkota stone slab flooring 18-20mm thickin riser of steps, skirting, dado and pillarand jointed including rubbing and polishing complete all as specified and directed by Engr-in-Charge. 130 M&L for 20mm thick screed bed of bedding layer in CM (1:6) for laying floor tiles complete all as specified and directed by Engr-in-Charge. 131 M&L25 mm thick cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as insub base of floors,finish rough to receive the floor finishes etc complete all as specified and directed 132 Dismantling of RCC posts or struts any section including taking out embeded portion and making good disturbed ground all as specified and directed. 133 Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. 134 Dismantling expanded metal (n. exc 4 Kg per Sqm) any thickness or mesh/chain link fencing, fixed with steel or wood fillets if any complete all as specified and directed. 135 Excavation in post holes each n exc 0.5 cum and getting out in hard/dense soil, returning, filling in and ramming earth in layers n exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface all specified and directed. 136 M&L PCC (1:2:4) type B2 (using 40mm graded aggregate) as in foundation of posts etc complete all as specified and as directed. 137 S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. 138 S&F MS Screw bolts 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other,embeded in RCC post, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but n. exc 15 cm long complete all as specified and as directed. 139 S&F Mild Steel Flats 40 x 6 mm thick in wind ties for roof inclduding securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc conforming to Fe-290 Gde E-165 complete all as specified and as directed. 140 Supply only MS galvanised chain link fencing any size or type all complete all as specified and as directed. 141 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards rails, straining bolts, etc, including provision of binding wire complete all as specified and as directed. 142 S&F 10 mm dia round bars as stiffening member in fencing including securing the fencing confirming to Fe-410-W (gde-E-250) qualiity A or Fe-290 (Gde-E-165) as link all specified and directed. 143 M&L for applying two coat of Black Japan paint over a coat of red oxide primer on steel surfaces of any descripition over 10 cm width or girth etc complete all specified and directed. 144 S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to entanglements aprons of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc all specified and directed. 145 Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil 146 Excavation in trenches n,exc 1.5 m wide and n.exc 1.5 m deep for foundation and getting out in any type ofsoil complete all as specified and as directed. 147 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in foundation, including rafts footing, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. 148 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in columns, pillars etc complete all as specified and as directed. 149 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in beams, plinth beams, cantilevers, bressummers, lintels over 1.5 m span etc complete all as specified and as directed. 150 M&L for re-inforced cement concrete 1:2:4 type B-1 (20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc complete all as specified and directed by Engr-in-Charge. 151 Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of complete all as specified and directed by Engr-in-Charge. 152 Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-Charge. 153 Use and waste of formwork to sides of pillars, posts, struts, piers,columns and stanchions complete all as specified and directed by Engr-in-Charge. 154 M&L for MS TMT bars8mm dia and over, cut to lenth, bend to shape required, including cranking, bending, sprially for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. 155 M&L for MS TMT bars 08 mm dia and over, upto and including 10 mm dia in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge. 156 M&L rendering 15 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cementcomplete all as specified and directed by Engr-in-Charge. 157 Preparing newly plastered surfaces of walls and applying two coats of white wash complete all as specified and directed by Engr-in-Charge. 158 M&L hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. 159 M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed by Engr-in-Charge. 160 S&F PVC (SWR) WC connector 110mm dia lip ring complete all as specified and directed by Engr-in-Charge. 161 S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed. 162 S&F32 mm bore Low density poly ethylenepipes of pressure rating 6kgf/cm2fixed complete to walls,ceiling or in floors etc complete all as specified and directed by Engr-in-Charge. 163 S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterredHot ot Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. 164 Taking downcarefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge. 165 Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. 166 Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. 167 M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed . 168 Description same as per item No 167 above but one fan point controlled by one switch & regulator. 169 Description same as per item No 167 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. 170 Description same as per item No 167 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. 171 Description all as per item No 167 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. 172 S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. 173 S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. 174 S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. 175 S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. 176 S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. 177 S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed. 178 S&F MCB single pole and neutral 50 Amp/63 Amp 240 V ,10KA , C series, connected with copper lugs complete all as specified and as directed. 179 S&F Rigid non-metallic PVC conduit 25mm dia(external) ISI marked concealed and including cutting necessary chases on wall/ceiling surface for drawing of conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc. complete all as specified and as directed. 180 Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . 181 Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 16 sqmm 4 core as per IS 7092 Pt-I completeall as specified and as directed. 182 S&F MCB single pole 6 to 32Amps 240 V,10KA, C series, connected with copper lugs complete all as specified and as directed. 183 Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. 184 S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification. 185 M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts gradecable drawn into conduit (Existing / new)including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code concealed on wall complete all as specified and as directedNote:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment.(b) New conduit and conduit accossories shall be measured separately. 186 Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. 187 S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed 188 S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in AppndxB to PS . 189 S & F delux fan regulator electronic rotary step type 240Volts 50Hzscomplete all as specified as directed 190 S & F in repair 9 W LED6000k decorative ultra slim linear LED fittings fixture with extruded polycarbonate 2 feet mirror tubelight envoiremental friendly, energy efficientintegrated driver fitted including wiring upto and terminate into ceiling rosecomplete all as specified as directed 191 S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 4 ways 240 V complete all as specified and as directed. 192 S&F 1100 Volts grade heavy duty ISI markedcable PVC insulated stranded aluminium conductor wireone twin core cable flat or circular of size 10Sqmm to be connected to existing MCB box/main switchescompleteall as specified and as directed. 193 S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 300mm sweep, 1400RPMwith blades and frame and louvers including all arrangement of making holes in wall, making good and finishing of disterbed surfaces to match with existing surfaces complete all as specified and as directed. 194 Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V 25 Sq mm 4 core as per IS 7092 Pt-I completeall as specified and as directed. 195 S & F storage type water heater (geyser) 5 star, BEE rating 230Volts AC, 25 Ltr capacity comprising stainless steelinner tank , suitable heating element, thermostate with adjustable temperature setting, indication lamp, provn for inlet outlet and air vent connection& NRV including all fixing arrangement such as fastener bolts, nuts, washer etc complete including making good disturbedwall surfaces to match with existing surfaces complete all as specified as directed 196 S & F sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA ‘C’ seriescomplete all as specified and as directed. 197 S&F TPN DB-DPX125 MCCB Box 4 way double door with provision for DPX125 MCCBs as incommer concealed on wall and SP/TP MCBs as out going nos of module DPX 125+12 complete all as specified and as directed. 198 S&FMCB having breaking capacity of 16KA 415V 4 pole having rating capacity of 63 Amp 100% ICU complete all as specified and as directed. 199 Supply and laying GI pipe 50mm bore LIGHT GRADE in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed. 200 M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
|
