|
Making Accessible Building Features Under Accessible India Campaigning At Archives Building Library Block Sso Building At Rajasthan Secretariat Jaipur. (Civil Work)- 1 Cutting of construction joint/ longitudinal joint 4 to 6 mm wide using mechanical concrete cutter including cost of diamond bit cutting wheel and filling of bitumen sealing compound in groove including cost of sealing compound.75mm depth (B-11/11.32.3) 2 Dismantling stone slab/ terrazo chip flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. (B-14/14.25) 3 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge.1: 3: 6 or richer mix. (B-14/14.2.1) 4 Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar. (B-14/14.7.3) 5 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M-15 grade Nominal Mix 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (B-3/3.1.2) 6 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto V level in all shapes and sizes in Cement mortar 1 : 4 (1 cement : 4 coarse sand) (B-5/5.2.1) 7 Half brick masonry in superstructure above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 4 (1 cement : 4 coarse sand) (B-5/5.8.2) 8 Supplying and fixing in walls machine cut and polished stone shelves tands and in CM 1:3 with machine cut edges Sand or other approved stone 50mm thick (B-6/6.17.2) 9 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete Jhunjhunu / Jalore (Red / Choclate Colour) Above 3601 Cm2 Slabs. (B-7/7.5.3) 10 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Above 3601 Cm2 Slabs (B-7/7.7.3) 11 Extra for providing edge moulding to 15-18 mm thick marble/Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. Granite workFull Edge moulding (B-7/7.8.2.1) 12 Random Rubble stone masonry with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in Cement Mortar 1:6 ( 1-Cement : 6-Sand). (B-6/6.1.6) 13 Plaster on new surface on walls in cement sand mortar 1:4 including rackingofjointsetc. complete fine finish 25mm thick (B-12/12.2.1) 14 Providing and Applying white cement based putty over plastered surface to prepare the surface even and smoothcomplete. New Plastered Surface (three or more coats) (B-12/12.22.1) 15 Carriage of Building Rubbish Stone Metal, Grit and Ballast etc. including loading and unloading complete with all lead (G-4/4.2.13) 16 Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide (B-9/9.8.1) 17 Extra if square, rectangular hollow tubular sections are used or grill made by flats only(B-9/9.8.2) 18 Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Makrana "Adanga".Above 3601 Cm2 Slabs (B-7/7.1.3) 19 Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete Rajnagar 1st quality/Ageria with light spots. Above 3601 Cm2 Slabs (B-7/7.2.3) 20 Extra for fixing Marble/Granite stone over and above corresponding basic item in facia and drops of width upto 150mm with epoxy resin based adhesive including cleaning etc. complete. (B-7/7.9) 21 Providing & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 gradeGhana Teak Wood Grade-I (B-8/8.1.5) 22 Providing and fixing external grade board solid core single flush door shutters ISI: 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per Annexure-A 35mm thickDecorative teak veneer both side (B-8/8.13.3.3) 23 Extra for providing external lipping with 2nd class teak wood battens 6mm minimum depth on all edges of shutters (over all area of door shutter to be measured) Over item (B-8/8.14) 24 Extra for cutting rebate in flush door shutters for making double leaf shutter (Total area of the shutter to be measured) (B-8/8.17) 25 Extra for providing other type fittings as mention in Annexure-A (as per approved by Engineer-in-charge) Brass fittings (B-8/8.18.1) 26 Providing and fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete. (B-8/8.27) 27 Providing and fixingaluminum workfor doors, windows, ventilators and partition with extruded built up standard tubular/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc, all complete as per architectural drawings and thedirections of Engineer- in – charge .(Glazing and paneling to be paid for separately). For fixed portion Powder coating aluminium( min thickness of powder coating 50 micron) (B-16/16.1.1.2) 28 Providing and fixingaluminum workfor doors, windows, ventilators and partition with extruded built up standard tubular/appropriate Z sections and other sections of approved make conforming to IS :733 and IS :1285,fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle Aluminium snap beading for glazing/paneling, 29 C.P. brass/ stainless steel screws Al. Tower bolt & Al. handle & Al. Aldrop etc, all complete as per architectural drawings and thedirections of Engineer- in – charge.(Glazing and paneling to be paid for separately). For shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges/rollers etc. and making provision for fixing of fittings wherever required (locks shall be paid for separately). Powder coating aluminium( min thickness of powder coating 50 micron) (B-16/16.1.2.2) 30 Providing and fixing 12 mm thick prelaminated three layer medium density (exterior grade ) particle board Grade I, Type II conforming to IS : 12823 bonded formaldehyde synthetic resin, of approved brand and manufacture in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and direction of engineer-in-charge. Prelaminated particle board with decorative lamination on both sides. (B-16/16.4.2) 31 Painting with synthetic enamel paint of approved brand and manufacture to give an even shadeTwo or more coats on new work. (B-12/12.46.1) 32 French sprit polishing Two or more coats on new work including a coat of wood filler. (B-12/12.48.1) 33 Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20 x 10 x 2mm and bracket with flat iron diagonals 20 x 5mm. size with top and bottom rail of T-iron 40 x 40 x 6mm. with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). (B-9/9.10) 34 Providing and erecting direction and place identification retro reflectorized sign as per IRC 67 made of encapsulated lens type reflective sheeting vide clause 801.3.1 fixed over alumnium sheeting 2mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75x75x6mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450x450x600mm, 600mm below ground level as per approved drawing and MoRTH Specification Clause \801. Direction and Place Identification signs upto 0.9 Sqm size board.(R-10/10.3(a)(i) 35 Providing and applying two coats of ready mix paint including primer coat of approved brand on steel surface after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801.(R-10/10.7) 36 Painting lines, dashes, arrows etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS: 164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and MoRTH Specification Clause 803.(R-10/10.8) 37 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvaiumeseel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm shets be casted with regular modified plyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate at made at to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and foe a minimum up to 12mts with all scaffolding. (B-17/17.1) 38 P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial ply base fixed to wooden screws & washersOther sizes (S-1/1.44.2) 39 Providing and fixing designer cement concrete polished tiles over 20mm average thick base of CM 1:4 ( 1 cement : 4 sand) jointed with cement mortar 1:2 ( 1 cement : 2 sand) with pigment to match the shade of the tiles complete with all respect. (B-11/11.28) 40 Add extra for Fixing glazed/Ceramic/ Vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, using 5 Kg adhesive per Sqm of tile area in average 3mm thickness instead of cement mortar. (B-7/7.20) 41 Providing & Laying Tactile tile (for vision impaired persons is standard of size 300x300x20mm and confirming to IS 1231 of 1980 (Re affirmed in 2006) in all colours & sheds further product should confirm ASTM 303 for shad resistance and DIN51099 for colour fastness etc. laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 course sand) in all shapes & patterns including grouting the joint which white cement mixer) will matching pigments etc complete is per direction of Engineer-in-charges. Grade M 30 42 Providing and fixing stainless steel railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). Grade 304 43 Providing and Fixing Aluminium composite panel of approved make 3mm thick with 0.5mm thick skin & PVDF coated approved shade for wall panelling. Main framing work to be done using 50mmx25mmx1.6mm tubular section of approved make. Stainless steel screw to be used to fix the ACP panel to be fixed to the main frame with industrial adhesive tape and panel groove to be sealed with weather proof silicon sealant suitable for glass/aluminium etc. complete in all respect as approved by Engineer-in-charge
|
