|
Construction Of Ski Hire Shop At Sonamarg - Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 1 meter from cutting edge All Kinds of soil 2 Providing and Laying dry stone solingdully hand packed incl.ramming etc with all cost and carriage of materials,complete including all carriages of material complete . 3 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 4 Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works up to plinth lvl. 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) 6 Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns 7 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. 8 Providing and laying gang saw cut of specified thickness, mirror polished pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. 18 mm thick 9 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm 10 Providing and Laying Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50mm thick with 20mm nominal size stone aggregate. 11 Providing and applying 12mm thick Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) including curing complete. 12 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded 13 Providing colour coated hi-rib profile sheet roofing of approved brand and manufacture, fixed with polymer coated steel screws, bolts 100mm long 8mm dia with washers and PVC (upon a pitch of 60 degree) excluding the cost of purlins, rafters and trusses @ 1 mm thick. incl ridges or hips and vallies of width 30cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.80 mm thick with zinc coating not less than 275 gram/m2 incl.carriage 14 Providing / fixing of prefabricated structure excludingcost of columns, beams etc structural steel having following specifications wall panells 60 mm thick with 0.63 mm hard diped galvanised steel sheets on both sides with 60 mm thick layers of ridged CFC free close cell polyurethene fom. Ceiling panells 40 mm thick made 0.63 mm hard dipped galvanised steel sheets on both sides with 40 mm layers of ridged CfC free close cellpolyurethene fom 15 Providing and fixing powder coated onodized aluminium work for window and door frames with bother shutters of glazed and wire gauge of standard to sections of approved make fixed with sand plugs and screws or disposed fixtures including ACPboarding for pannels, sliding/fixed incl carriage complete as per directions of Engineer Incharge. 16 Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) 17 Providing and fixing aluminium fittings ISI marked with necessary screws etc complete 18 Handle150mm 19 Handle100mm 20 Tower Bolt 21 L-Drop 22 Providing and fixing thermal insulation of ceiling (under deck insulation) with specified glass wool conforming to IS: 8183, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3mm) @ 60cm c/c and wire mesh of 12.5mm x 24g wire for top most ceiling of building.With resin bonded fiber glass wool with density 24 kg/cum 23 Providing and fixing of 6mm HPL (High pressure lamminate) exterior/Interior grade weather proof craft paperbased on 1"X2" aluminium framing with rivet fitting including scaffolding staging, necessary fitting and carriage complete job in all aspect. 24 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, 25 Providing and laying Fine chisel dressed Devri Stone of size 300x200 mm face with 25 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. 26 Providing, Placing and fixation of multi ski wall rack made upof heavy duty alloy steel incl carriage complete job supports load upto 100lbs each level can fit8-12 pairs of ski"s on this one rack. 27 providing and fixing of pvc rubber interlocking tiles of approved make havingthickness not less than20mm inclfixation and carriage complete. 28 Carriage of materials 29 Sand Agg. For an avg. lead of 20 Km 30 Stone Agg. For an avg. lead of 20 Km
|
