Tender For Various Work Of Business Plan 2024-25 Part-2 In Area Edd Ii Sre - In The Work Area Of ​​Electrici ... in India

Work Detail

Various Work Of Business Plan 2024-25 Part-2 In Area Edd Ii Sre - In the work area of ​​Electricity Distribution Section-II Saharanpur, under Business Plan Scheme 2024-25 Part-2, to reduce tripping at 11 kV Industry I and III (double circuit) of 33/11 kV Power Substation-ITI II, work of laying about 1700 meter 11 kV XLP 3x185 sq. mm cable and work of installing a separate 250 kVA transformer when the 630 kVA transformer placed near Makhani Rubber, fed from ITI Industrial-II, gets overloaded. - Safely carriage ofPCC/ST poles up to 11 Mtr. Longfrom ESC, SRE to site of work including loading & unloading at both ends.. 3 Safely carriage of other complete line material(Except PCC/ST Poles) from ESC, SREto site of work including loading, unloading at both ends. 4 Safely carriage of11 KV XLPE cable size 3x185 sq mmfrom ESC, SRE to site of work including loading & unloading at both ends.. 5 Fixing of 11 KV cable jointing Outdoor kit 3x185 sq mm. 6 Erection of single support on PCC/ST poles up to 11 Mtr. Long) with complete fitting of all accessories of11 KV /LT line. complete. 7 Erection of D/P with PCC/ST poles up to 11 Mtr. Long) with complete fitting of all accessories. 8 Providing ofNut and boltsOFF size. 9 Providing & Fixing Stone pad 300x300x75 mm 10 Earthing of poles by earthing rod with GIwire etc 11 Providing of LT Incoming panel with metering eq & fix arra. 12 Providing of Copper L-Picec 50x225x10 mm. 13 Providing & Fixing Danger barbed 11 KV 14 Providing of all type clampswith nuts and bolts made by MS flat size 50x6. 15 Concreting ofPCC/ST pole with cement concreting in block of 600x600x1500 mm in ratio 1:4:8 with cement, sand and brick ballast size 1x1.5” 16 Laying, lifting, stringing, sagging jumpering & binding of ACSR Rabbit Conductor for 11KV/LT Line as per RESPO specification. 17 Safely carriage ofLT AB cable of size 3x95+1X70+1X16 sq.mm sq mmfrom ESC, SRE to site of work including loading & unloading at both ends. 18 Laying, lifting, Stringing, proper sagging ofLT AB cable of size 3x95+1X70+1X16 sq.mm. including fixing ofall type clamp and connectorof all accessorie with providing. 19 Constriction of plinth for installation of 250 KVA T/F of size 2x2x1.5 mtr made of 9”inch thick wall in all four sides with 6”inch thick RCC Top duly filled with sand and plastered 12mm thick in ratio 1:4 with cement and sand on outer surface of brick wall. 20 Safely carriage of250 KVA T/Ffrom ESC, SRE to site of work including loading & unloading at both ends.. 21 Safely installation ofNew 250 KVA T/F on the plinth by private crain with proper alignment and Complete fitting including making connection and commissioning 22 Water level Earthing of 250 KVA T/F (1 No body & 1 No. neutral earthing) by boring & fixing ofG.I pipe 1½ Dia (Jindal Class B) and connecting with G.I. Strip of size 40x4 mm and G.I wire at bottom of G.I pipe to the T/F providing of required charcoal & salt in the pipe. 23 Providing & Making of Wiremesh fencing size 2.5x2.5x2.5 mtr with grouting making frame of MS angle 40x40x6 mm and fixing four no MS strip size 25x4 mm at equal distance in between the frame and fixing square mesh of 50 mm squre in each frame the fencing should cover all side of T/F with providing 1 no door size 6x3 with sitakni & dandala with green paints (British/Asian/enamel paints) 24 Laying of LT PVC UN Armoured Al Cable 4x25 sq mm. 25 Laying of11 KV XLPE cable 3X185sq mm.

Contact Information

Other Detail