|
Bids Are Invited For 12 101582020084 Item Description: 35 TROUGHING IDLER WITH 2 DEG. TILT, SHAFT LENGTH-497, SHAFT DIA25MM, ERW STEEL TUBE DIA-152.4MM, TUBE LENGTH-465MM, TUBE THICKNESS-4.85MM, GROOVE LENGTH-12MM, SHAFT MAT-EN 8/C 40, FITTED WITH SEIZE RESISTANT BEARING MAKE FAG/SKF BODY PAINTED WITH 02 COAT RED OXIDE ZINC CHROMATE. • Idler will be Dust proof, Waterproof & Weatherproof • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable to each other. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 300 13 101582020086 Item Description: FLAT RETURN IDLER WITH, SHAFT LENGTH-1452MM, SHAFT DIA-25MM, ERW STEEL TUBE DIA-152.4MM, TUBE LENGTH-1400MM, TUBE THICKNESS-4.85MM, GROOVE LENGTH-22MM, GROOVE C/C DISTANCE 1430MM SHAFT MAT-EN 8/C 40,FITTED WITH SEIZE RESISTANT BEARING MAKE FAG/SKF BODY PAINTED WITH 02 COAT RED OXIDE ZINC CHROMATE. • Idler will be Dust proof, Waterproof & Weatherproof • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable to each other. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 600 14 101582020093 Item Description: 35 IMPACT IDLER WITH 2 DEG. TILT, SHAFT LENGTH-497MM, SHAFT DIA-30MM, ERW STEEL TUBE DIA-139.7MM,TUBE LENGTH-465MM,TUBE THICKNESS6.3MM,RUBBER DISC OD-190MMRUBBER DISC HARDNESS-65.5GROOVE LENGTH-12MM,GROOVE C/C DISTANCE 485MM SHAFT MAT-EN 8/C 40,MAT. OF RUBBER DISC NEOPRENE FITTED WITH SEIZE RESISTANT BEARING MAKE FAG/SKF BODY PAINTED WITH 02 COAT RED OXIDE ZINC CHROMATE. • Idler will be Dust proof, Waterproof & Weatherproof • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable to each other. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 50 15 101582020085 Item Description: BRACKET FOR 35 TROUGHING IDLER WITH 2 DEG TILT, BELT WIDTH-1200, TROUGHING ANGLE-35, MATERIAL OF BRACKET-ROLLED SECTION&MILD STEEL PLATE AS PER IS2062 GR-A BODY PANTED WITH 02 COAT RED OXIDE ZINC CHROMATE AND 02 COAT SYNTHETIC ENAMEL • All the Brackets are interchangeable to each other. • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 80 16 101582022376 Item Description: ROLLER FOR IMPACT IDLER BELT WIDTH 1000 MM, T.A.-20? DRG. NOD21163/4, SL NO-1,114.3 MM DIA TUBE X 190 MM DIA RUBBER DISC. TYPE IMPACT ROLLER SUITABLE FOR 1000MM BELT. • Idler will be Dust proof, Waterproof & Weatherproof • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 30 17 101582022373 Item Description: Roller for Impact Idler for 40" (1000 mm) B/W without bracket. Roller Length-381 mm; Roller (Rubber) Dia-152.4 mm; Shaft Length-411 mm; Shaft dia- 25 mm • Idler will be Dust proof, Waterproof & Weatherproof 30 • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP. 18 101582022371 Item Description: Roller Troughing without frame for carrying idler B/W size 40"(1000) mm, roller dia.-152.4mm, roller length-380 mm, shaft length-416 mm, shaft dia.-25.4 mm • Idler will be Dust proof, Waterproof & Weatherproof • Idlers are Drop in type & Rolls can be removed without Dismantling the Brackets from Conveyor structure. • All the Rolls are interchangeable. • Sealing: Lithium based Grease Packed & sealed for life • Idlers are provided with double Labyrinth Sealing • Painting: Surface to be painted shall be thoroughly cleaned and frames must be painted with 2 coats red oxide Zinc chromate primer. • Dimension provided in the attached indicative drawing. Final drawing is to be prepared and submitted by the successful vendor. • Testing & inspection will be as per Approved QAP Total Quantity : 2972
|
