|
Tender For Special Repair To Bldg No P 07 At Palampur Mil Stn; 1 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sq.m each complete all as specified and directed. 2 Taking down chowkats or frames but with shutters (with outtaking off shutter from the frames) exc 1.5 sq.m but n. exc 4 sq.meach, complete all as specified and directed. 3 S&F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory window & other frames/chowkhat of size 65x100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural bibres (Wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screw having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900n/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire, retardand and fixed in position with MS hold fast/lungs/ss dash fasterners of required dia and length as per direction of Engineer-in-Charge. 4 S&F factory made single extruded WPC (Wood polymer composite) solid door/window/ceosetory window & other frames/chowkhat of size 65x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural bibres (Wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screw having minimum frame density of 750 Kg/Cum, screw withdrawal strength of 200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900n/mm2 and resistance to spread of frame of class A category with property of being termite/borer proof, water/moisture proof and fire, retardand and fixed in position with MS hold fast/lungs/ss dash fasterners of required dia and length as per direction of Engineer-in-Charge. 5 S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat rusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (face) & 900N (Edge) minimum compressive strength 50n/mm2 modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of bening termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of miniimum 14 microns thick of approved design pasted with lot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, all as per direction of Engineer-in-Charge. 6 S&F factory made single extruded WPC (Wood polymer composite) solid decorative type flush door shutter (glazed or skelton) of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat rusk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800N (face) & 900N (Edge) minimum compressive strength 50n/mm2 modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of miniimum 14 microns thick of approved design pasted with lot melt adhessive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw, (incl wiremesh required) all as per direction of Engineer-in-Charge. 7 S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed. 8 S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails.M.S. frame shall be covered with heat molded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed. 9 S&F 100 mm sizebutt hinges, medium weight, cold rolled mild steelcomplete all as specified and directed. 10 S&F 150 mm size (length of bolt) aluminium anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. 11 S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. 12 S&F 300 mm size (length of bolt) aluminium alloy, anodised, sliding door bolt with hasp and staple ,(bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 13 S&F 300mm, ordinary door springs including roller and roller plate complete all as specified and directed. 14 Demolition ofbrickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed. 15 M&L walling of random rubble, uncoursed, well bonded, bedded and solidily hearted, built in CM 1:4 incl demolition complete all as specified and directed. 16 M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. 17 Taking down cement plaster including tiles of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed. 18 Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:6, finished the surface even and smooth without using extra cement complete all as specified and directed. 19 Rendering 15mm thick plaster on fair faces of brick work/stone masonry, concrete surface in CM 1:4, finished the surface even and smooth without using extra cement complete all as specified and directed. 20 Rendering 10mm thick plaster on fair faces of concrete surfaces as in facia or ceiling in CM 1:3 finished the surface even and smooth without using extra cement, complete all as specified and directed. 21 M&L painting work till top surface of existing plaster and crack filling with crack seal upto 3mm where required and making good/ smooth the surface with wall putty with silicon additive and sandaling the surface for removal of loose particles and applying one coat of smart care waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coat of 100% acrylic smooth emulsion exterior grade with silicon antive and anti algal properties (Apex Ultima Suprema) complete all as specified and directed.Note: The above specification for exterior painting is guaranteed for 8 years performance warranty and to be executed only by orignal equipment manufacturer.Make: Asian paint/equivalent. 22 M&L preparation of newly plastered surface of ceiling and applying three coats ofwhite wash complete all as specified and directed. 23 M&L preparation of old plastered surface of ceiling and applying two coats ofwhite wash complete all as specified and directed. 24 M&L preparing new plastered wall surface and apply two coat of oil bound distemper on newly plastered sufaces applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. 25 M&L preparing old plastered wall surface and apply two coat of oil bound distemper on old plastered sufaces applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. 26 M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. 27 M&L preparation of old surfaces of steel of any description, over 10 cm width or girth not other wise described and applying two coats of synthetic enamel paint over existing surface complete all as specified and directed. 28 Prepartion of old wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 29 Prepartion of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. 30 S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. 31 M&L RCC 1:2:4 nominal mix type B1 using 20mm graded crushed stone aggregate as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl demolition complete all as specified and directed. 32 Form work to rough finished surfaces of concrete for soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat or curved complete all as specified and directed. 33 S&F pre-painted galvalume aluminum zinc coating GIbased corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws (fixed in repairs), compete all as specified and directed. (Colour as approved by GE) 34 M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with selftapping screws (fixed in repairs) complete all as specified & directed. (Colour as approved by GE) 35 S&F 6mm thick E-board (Classic false ceiling of size 610mm x 610mm fixed with GI snap grid frame work of size sizes as GI tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick GI tee as cross runner and GI angle of size 25x25x1.25mm at the perimeter, including 4mm GI adjustable suspender of required length, including dismantling of old ceiling, including dismantling complete all as specified and directed. 36 Demolition of cement concreteunreinforced in ground floors, kota stone, granite flooring, tiles flooring andpavingsnot exceeding15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed. 37 M&L 75mm thick PCC 1:4:8 type D-2 (using 20mm graded crushed stone aggregate) as in plinth protection/footpath finished even and smooth without using extra cement complete all as specified and directed. 38 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggegate) as in floors finished rough to receive floor finishes complete all as specified and directed. 39 M&L 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggegate) as in floors finished rough to receive floor finishes complete all as specified and directed. 40 M&LNon-skid,coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. 41 M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified. 42 M&L Vitrified Ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thickbacking coat in CM 1:4 complete all as specified. 43 M&LNon-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.18 sqm but not exc 0.38 sqm as in floors etc laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed. 44 M&LNon-skid, coloured ceramic tiles 7 to 8mm thick (Square/rectangular)area of each tile exc 0.18 sqm but not exc 0.38 sqm cut to size as required as in skirting/dado over and including 15mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with white or coloured cement to match the colour of tiles complete all as specified and directed 45 M&L Glazed ceramic coloured tiles in vertical surface 350mm x 250mm x 7mm/450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting/dado etc. laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured to match the tiles complete all as specified and directed. 46 M&Lmachine cut kota stone slab flooring 18 to 20mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 20 mm thick screed in CM (1:4) complete all as specified and directed. 47 M&L polished kota stone 15mm thick as in vertical surfaces such as riser of steps, skirting etc setr and jointed with grey cement mixed with pigment over screed plaster 10mm thick in CM 1:4 complete all as specified and directed. 48 M&L for 18-20 mm thick granite (of any type) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with and including 10mm thick screed bed in CM 1:3,complete all as specified and directed. 49 M&L PCC 1:4:8 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. 50 S&F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe-410 W(Gde-E-250) quality-B, complete all as specified and directed. 51 S&F in repairs 1000litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. 52 S&F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including fixing fittings such as GI nipple for inlet, outlet, washout and overflow etc, including 20mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. 53 S&F in repair vitreous china premium/1st quality wash down water closet wall hung EWC white/Ivory/gel gasket etc incluidng fixing of plastic cover seat cover, block/white closed pattern with flat botom and cover and mild steel chromium plated hingh device (excluding flushing cistern & flush pipe) complete all as specified and directed. 54 S&F concealed self closing valve for wall mounted WC, 32mm dia, PVC flushing pipe, PVC connection 15mm size withr PTMT nuts of length 450mm and with CP brass coupling & PVC washer at both ends complete all as specified and directed. 55 S&Fin repair vitreous china coloured wash down water closet pan (Padestal Pattern), including connection to flush pipe, P or S trap, with fixing bolts PVC seat cover with chromium plated mild steel hinges device(excluding flushing cistern and flush pipe), complete all as specified and directed. 56 S&F in repairs 10 litres capacity PVC valve less symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle including brackets & 32 mm size PVC flush pipe and 15mm dia 450mm long PVC connection with CP brass coupling nuts and PVC washer at both ends, complete all as specified and directed. 57 S&F in repairs vitreous china wash basin, Oval type, size 550x400mm excluding tap, waste chain and plug and porcelain stopper but incl waste coupling but exclusive of fixing of supply and waste pipe complete all as specified and directed. 58 S&F waste pipe 32/40mm bore fixed to coupling of length as per site requirement for WHB and sink etc complete all as specified and directed. 59 S&F in repairs PVC coated mild steel conduit pipe 25mm dia (Drapery rod) with PVC coated MS clamps to hold drapary rod and decorative attachment at one or both ends of drapary rod, fixed to opening of door/windows, each opening n exc 1.50 mtr, contained with a pair of clamps and a pair of side ornamental attachments complete all as specified & directed. 60 S&F in repairs fancy type, chromium plated, bib tap,cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed. 61 S&F in repairs stop cock (one way or two way as per site requirement), fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed. 62 S&F in repairs stop cock (one way or two way as per site requirement), fancy type, chromium plated, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for union complete all as specified & directed. 63 S&F in repairs CP jet spray hygenic spray jet for 15mm bore dia fitings 1 to 1.5m long tube acrylic type complete all as specified and directed. 64 S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete al as specified and directed. 65 S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to WHB and sink or concealed type wall mixer fixed in any position as per site requirement complete all as specified and directed. 66 S&F PVC connection 15mm size, 450 mm long with PTMT nuts complete all as specified and directed. 67 S&F in repair brass chromium plated shower rose 125mm size, with or without swivel joints, including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour, fixing to steel pipe or unioncomplete all as specified and directed. 68 Dismantling 75mm dia cast iron or reinforced concrete drain pipes, PVC pipe jointed in cement mortar, solvent etc and taking out of trenches if required complete all as specified and directed. 69 Dismantling 100/110mm dia cast iron or reinforced concrete drain pipes, PVC pipe jointed in cement mortar, solvent etc and taking out of trenches if required complete all as specified and directed. 70 S&F cast iron soil waste spun pipe 100mm bore single socketed, in any length with cement joint, fixed in wall including fixing 5mm flat iron and 16mm dia iron stay clamps etc complete all as specified and directed. 71 S&F cast iron spun pipe 100mm bore single socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed. 72 S&F cast iron spun pipe 75mm bore single socketed, in any length with rubber ring joints, as in floor and trenches complete all as specified and directed. 73 S&F cast iron spun waste pipe 75mm bore single socketed, in any length with cement joints, fixed in wall including fixing 5mm flat iron and 16mm dia iron stay clamps etc complete all as specified and directed. 74 S&F cast iron spun pipe 50mm bore single socketed, in any length with rubber ring joints, as in floor and trenches including dismantling all complete all as specified and directed. 75 S&F diminishing pieces door taper bends any radius 75mm bore with access door complete all as specified and directed. 76 S&F diminishing pieces door taper bends any radius 100mm bore with access door complete all as specified and directed. 77 S&F 75mm bore CI bends floor trap with grating including jointing with solvent cementcomplete all as specified and directed. 78 S&F 100mm bore branch pieces double Tee equal or unequal with access door complete all as specified and directed. 79 S&F 75mm bore branch pieces double Tee equal or unequal with access door complete all as specified and directed. 80 S&F cost iron vent cowl 50mm bore dia, complete all as specified and directed. 81 S&F stainless steel plate rack of size 600mm x 750mm of selected quality complete all as specified and directed. 82 S&F 900mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. 83 S&F in repairs SS soap dish, approximate size 160mm x 160mm x 90mm including fixing complete all as specified and directed. 84 S&F towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified & directed. 85 S&F steel water tubing, 15 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) incl dismantling, complete all as specified and directed. 86 Fixing only steel water tubing, 15 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) but except GI tubing, incl dismantling, complete all as specified and directed. 87 S&F steel water tubing, 20 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) incl dismantling, complete all as specified and directed. 88 Fixing only steel water tubing, 20 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) but except GI tubing, incl dismantling, complete all as specified and directed. 89 S&F steel water tubing, 25 mm bore, galvanised , medium grade with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor (including chiseling or groove cutting of stone masonry for concealed type tubing incl all necessary means) incl dismantling, complete all as specified and directed. 90 S&F aluminium anodised powder coated chowkhats frames for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc complete all as specified and directed. 91 S&F 4mm thick ordinary quality sheet glass pin headed/plain fixed to aluminium frame of partition etc fixed with rubber gasket & aluminium coated snap beading etc complete all as specified and directed. 92 S&F powder coated aluminium anodised door shutters (powder coating of any colour and thickness not less than 50 micron) aluminium sectin weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing two number of aluminium handle 150mm long for each shutter, one aluminium door stopper, hinges type B-21, 100mm long, anodised aluminium snap beading, screws, anodised aluminium fittings complete all as specified and directed. 93 S&F powder coated aluminium anodised window and ventilator shutters of any type (two/three track) sliding type aluminium powder coating 50 micron and aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as suitable handle (1 No.) locking & sliding system complete all as specified and directed. 94 S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixedwith tinned tacks or galvanised wire staples,complete all as specified and directed. 95 S&F 18/19mm thick block boards, grade 2 quality interior grade, decorative type with decorative face veneer on one face complete all as specified and directed. 96 S&F auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. 97 S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 Kgs complete all as specified and directed. 98 S&F stainless steel handles 100mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. 99 S&F chromium plated stainless steel wire basket (storage basket) pull out type for large utensils size 480x500x150mm of grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 100 S&F chromium plated stainless steel wire basket (cup and saucer basket) pull out type for large utensils size 380x500x100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 101 S&F chromium plated stainless steel wire basket (Plate basket) pull out type for large utensils size 380 x 500 x 100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 102 S&F chromium plated stainless steel wire basket (Cutlery basket) pull out type for large utensils size 380 x 500 x 100mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. 103 S&F 75mm size, hasp and staple safety type aluminium anodised with mild steel hinge pin incl bolt to hinge plate and fixed with screws complete all as specified and directed. 104 S&F 40 mm size (Width of flaps when open) continuous paino hinges, mild steel, bright finish or electrogalvanisedcomplete all as specified & directed by Engineer-in-charge. 105 M&L 50mm thick PCC in two layers 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub-floors, sub-bases, floors and pavings & roof padding etc including chicken wire mesh (12x12mm) of galvanised steel wire 0.91mm dia (sandwich) complete all as specified and directed. 106 M&L 10mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base over existsing surface, mixed with water proofing compound as per manufacturers instructions finished the surface even and smooth without using extra cement complete all as specified and directed.Note:- WPC and polymeric membrane shall be measured and paid separately) 107 S&F High performance two component brushable elastomeric poly urea waterproofing coating on Roof top/sunken floor of WC & floor trap cold applied ultraseal BA or approved equivalent, liquid membrane with white in colour with an elongination of 500% and tensile strength of 5 N/sq mm @ DFT 1mm as per ASTM D 2370.73 % solid content, shore A hardness of min 70. The system include final base preparation, epoxy primer application @200-250 gms/sqmt depending upon the surface porosity and applying home shield ultraseal BA or approved equivalent in two coats at 1.5 kg sqm providing 1.2 mm DFT etc, complete as per manufacture specification. 108 M&L 15mm thick (average) screed bed/plaster in cement mortar 1:3 in order to maintain proper slope and base in sunken portion of WC & floor trap for surface applying water proofing treatment coating mixed with water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed.(Note:- WPC and polymeric memebrane shall be measured and paid separately) 109 Supply only liquid water proofing compound complete all as specified and directed. 110 S&F framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railing; framed work of water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. 111 Taking down old steel doors & refixing the same opening after doing some maintenance work complete all as specified and directed. 112 Taking down carefully existing aluminium/ copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. 113 Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all asspecified and directed. 114 Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. 115 M&L concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694: 2010 having multi stranded copper conductor 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No.) drawn in and including concealed non metallic rigid PVC conduit medium grade (ISI marked with valid CML No.) not less than 20mm dia confirming to IS 14930 (Part-I) 2001, with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including Modular white cover plate ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches complete all as specified and directed. 116 All as per the description of serial item No 115 here-in-before but one 5/6 pin socket outlet, 6 amps on the same board complete all as specified and directed. 117 All as per the description of serial item No 115 here-in-before but one 5/6 pin socket outlet, 6 amps, independent complete all as specified and directed. 118 All as per the description of serial item No 115 here-in-before but for one 5/6 pin socket outlet 16 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed.Note:- Power circuit shall be done in separate circuit. 119 All as per the description of serial item No 115 here-in-before but controlled by two 2-way switches, with cable 1.5 Sqmm size complete all as specified and directed. 120 S&F modular switch 2 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed. 121 S&F bell, AC 230 volts, single pole complete all as specified and directed. 122 S&F modular bell push 6A 1 Module 240 volts complete all as specified and directed. 123 S&F modular switch one way 6 Amp, one module 240 volt ISI marked complete all as specified and directed. 124 S&F socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 125 S&F socket 6A/16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed. 126 S&F modular switch 1 way 16 Amp, 1 module 240 volt ISI marked complete all as specified and directed. 127 S&F modular white cover plate 8M complete all as specified and directed. 128 S&F modular white cover plate 6M complete all as specified and directed. 129 S&F modular white cover plate 3M complete all as specified and directed. 130 S&F modular white cover plate 1M complete all as specified and directed. 131 S&F single pole and neutral enclosure with 1 two pin and earth plug and a socket complete with one single pole MCB, 20 Amp, 240 volts ISI marked complete all as specified and directed. 132 S&F ceiling rose, 3 terminal surface type complete all as specified and directed. 133 S&F angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and directed. 134 S&F decorative ultra slim LED tubelight fitting of LED with extruded polycarbonate, environmental friendly energy efficient ready to use, 20 watt, 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 135 S&F decorative ultra slim LED tubelight fitting of LED with extruded polycarbonate, environmental friendly energy efficient ready to use, 10 watt, 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. 136 S&F LED bulk head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed. 137 M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 10 Sq mm for phase and neutral and one run of 10 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed.Note:- Wiring shall be done in proper colour coding. 138 S&F factory made CRCA sheet powder coated double door panel board 2mm thick, of size 50x50x16cm, wall mounted type partially grouted in wall with locking arrangement, handle and making good disturbed surface as well as matching with existing whitewash colour/surface and fixing only existing 4 Nos old energy meter with separate compartment including connection complete all as specified and directed. 139 S&F Sheet metal enclousers, VTPN distribution board 4 way 415V, double door with 125A MCCB as incomer complete with rated bus bar and netural link earthing fixed flush in wall including chases wall for fixing DB and making good distrubed wall surfaces to match with existing specification complete al as specified and directed.Note:- Distribution board and MCBs should be same make. 140 S&F distribution board sheet steel powder coated for MCB with rated bus bar and netural link earthing stud SPN 8 way 240 volts double door complete all as specified and directed.Note: Distribution board and MCBs should be same make. 141 S&F in replacement SPN 40 Amp rating 240V, 10 KA, C curve MCB and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and directed. 142 S&F in replacement SPN 63 Amp rating 240V, 10 KA, C curve MCB and current carrying capacity in the MCB DB complete with connection testing and commisioning complete all as specified and directed. 143 S&F in replacement 240V, 10 KA, C curve MCB SP and current carrying capacity 6 to 32 amps, in the MCB DB complete with connection testing and commisioning complete all as specified and directed. 144 S&F fancy lights with LED bulb holder plastic housing with clear prismatic diffuser, with IP 42 complete all as specified and directed.Note: The item must be brought as per sample approved by GE. 145 M&L earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connecting to GI earth wire of size 4mm size by means of bolts, nuts, check nuts and protected by provision of GI medium grade pipe of 15mm bore including provision of 40mm tk cover of RCC (1:2:4) reinforced with XPM (wt no less than 4Kg/sqm) and frame of angle iron 40mmx40mmx6mm with 6mm dia MS bar handle made to shape, GI light grade 20mm dia pipe for watering of suitable length placed on tp edge of earth plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and excavation and earthwork in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50m complete all as per plate No. 3 of SSR 2009 Part-I and connecting to earth test point all as specified and directed by Engineer-in-Charge and including testing on completion. 146 Note:-(i)RCC pit cover shall be pre-cast of RCC (1:2:4) type B1, 80mm thick reinforcement with 8mm TOR steel @ 100 c/c in lieu of CI cover and the rate includes in the unit rate of item.(ii)Earth electrode shall be protected upto test point using necessary arrangement with suitable size GI pipe up to 7.50m and the rate includes in the unit rate of item.(iii)Earth pit chamber and RCC cover shall be painted with red paint over a primer coat and the rate includese in the unit rate of item.(iv)The earth chamber shall be constructed 5m away from the edge of the bldg pit and the cost of the same is deemed to be included in the rate for this item. 147 Disconnecting/taking down exhaust fan of any sweep removing and cleaning the dust properly, painting with same colour good quality synthetic enemelled paint after preparing surface for painting with existing colour shade oiling and greasing of bearing including refixing, rewinding if required and making thet connection and testing complete all as specified and directed. 148 M&L cutting and taking out old burnout winding of any sweep ceiling fan and rewinding with same gauge of copper winding wire of superior quality including insulation materials varnishing etc. and testing complete all as specified and directed. 149 Disconnecting water heater and taking in safe custody/refixing the same and making the connection and testing complete all as specified and directed. 150 Disconnecting electronic meters temper proof LCD display and taking in safe custody and refixing the same with caliberation and cleaning and making the connection and testing complete all as specified and directed.
|
