|
Tender for Interlocking, drain, toilet and painting work near badminton courtyard in Police Line, Ward No. 14, Bakwal - Site Clearance including labour and materials and including grass cutting and carriage of materials by Head load . of work 2 E/W flling in embankment with cartage soil up to 8.00 km distances etc com. 3 Construction of Granular sub base (GSB) by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory Iroller to achieve the desired density, complete as per Clause 401. 4 E/W in Excavation in ordenery soil in foudation including labour and matrials and |T/P with all com. Work SI No. 251 5 C.C. Work in 1:6:12 in cement, fine sand and 40 mm Gauge Brick Ballast including |labour and matrials , T/P with all com. Work SI No. 273 6 M-150 B/W in 1:4 in cement and coar sand mortar including labour and matrials, T/P with all com. Work SI No.305 7 12mm thick Plaster work in 1:3 in cement and fine sand mortar including labour and matrials, T/P with all com. Work SI No.583 8 R.C.C. Work in 1:1.5:3 in cement coarse sand and 20mm gauge including labour and matrials, T/P with all com. Work SI No.285 9 MS work in R.C.C. work including |labour and matrials, T/P with all com. Work SI No.504 10 P/L of 80 mm thick rubber moulded |interlocking cement concrete Paver blocks,Work SI No. 786(1) 11 P.C.C. Work in 1:2:4 in cement, Coarse sand and 20 mm GaugeStone grit including labour and matrials, T/P with lall com. Work SI No. 279(B) 12 42mm thick Plaster work With neat cement Punning in 1:3 in cement and fine sand mortar including labour and matrials, T/P with all com. Work SI No.583+13.18 13 Providing and iayìng Vitrified tiles in ldifferent sizes (thickness to be specified by Imanufacturer), with water absorption less than 0.08 % and conforming to 1.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse 14 Providing and laying Ceramic glazed floor tiles of size 300x300 mmn (thickness to be Specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, Iin all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick lbed ofcement mortar 14 (1 Cement 4 15 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, |over the plastered wall surface to prepare the surface even and smooth |complete. DSR 13.8 16 Finishing walls with Acrylic Smooth exterior paint of required shade for New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 13.46.1 17 Painting of Iron Work in Large Areas in |one Coat of ready mix paint primer and one coat approved paint etc all comp. SOR No.658 18 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 |mm sizes respectively one urinal basin with 5 litrePVC autometic flushing cistern.(DSR |17.23 )2021 19 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of lcapacity 10 litres with dual flushing system 20 Providing and fixing wash basin with CJ. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the waiis wherever require: 17.7.1 21 P/F water closet squatting pan (indian type W.C. pan) with 100mm sand cost iron P or S trap ,10 litre low level white P.V.C flushing |cistern with manually controlled device handle level )confirming to IS 7231,with all |comp work etc with all comp .S.No-17.1.1 22 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) DSR2021-20.3.2 23 Providing and fixing 30 mm thick ISI marked flush door shutters conforming to IS : 2202 (Part ) decorative type, coreof block board construction with frame of 1st class hard wood and well matched |teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. DSR 9.12 24 Prelaminated particle board with one side decorative and other side balancing |Lamination, flat pressed 3 layer & graded medium density) Grade I, Type Il conforming to IS : 12823 (exterior grade) 25 mm thick. DSR 9.6.3 25 MS work in Grill, Gate including labour and matrials, T/P with all com. Work SI No.503 26 S/F of Granite Sign Board including |labour and matrials T/P with all com. Work 27 Add 18% GST
|
