|
Providing Open Gym Items To Green Belt Opp To Passport Office In Ward No: 52, Zone 5 Area Of Gvmc. - Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational incidentalm labour charges such as shoring, sheeting, planking, struting, etc, complete for finished item of work including seigniorage exclduing dewatering charges etc Supply and filling with Crusher dust from approved quarry including cost and conveyaance, watering, tamping including all labour charges Plain Cement Concrete (1:4:8) Nominal mix using 40mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for Bed Concrete for finished item of work. Brick Masonry in CM (1:5) with with flyash cement solid bricks of size 290x225x140mm having a compression test not less than 50 kg/sqcm including cost and conveyance of all materials, seigniorage charges and labour charges for mixing of mortor watering curing etc. complete. Plastering in Cement Mortar (1:5) 12mm thick watering for curing including cost of materials, scafolding and watering and conveyance of all materials and all labour charges etc., complete as per SS and as directed by the Engineer - in - Charge. Supply, delivery and fixing of RCC sitting benches as approved by the department design and size including painting with two coats of 1st grade exterior emulsion of Asian(Apex)/Berger(weather coat) over primary coat of cement primer in parks including cost and conveyance of all materials and all labour charges , painting etc completed and as directed by the Engineer-in-Charge Painting with Synthetic Enamel Paint -Two coats - for New Iron work over a primer of Zinc chromate yellow oxide including cost and conveyance of all materials and labour charges as per SS and as directed by the department officers. Plain Cement concrete Grade M20 - Nominal Mix (machine Mixing) 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete. "CHEST PRESS SINGLE SIZE (L x W x H): 1550X710X2150 mm (± 10% tolerance allowable) Supply, Delivery, Installation and Commissioning of SEATED CHEST PRESS / CHEST PRESS DOUBLE with prime standpipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Handle frame & Seat frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting links shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns ionized coated and zinc dipped joint with robotic welded. The two handle frames are hinged over 100NB prime stand pipe with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Seat & Back rests are made with the GI Sheet of size 330X330X2mm with uniform bending radius to avoid sharp edges. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. . The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UVstabilized should be used. All products of Equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificateconformity to EN16630. with one year unconditional warranty.. This Equipment will be fixed at Triangle Park, Santhi nagar Area." "AERIAL STROLLER DOUBLE /AIR WALKER size (L x W x H): 2000X350X1500 mm (± 10% tolerance allowable) Supply, Delivery, Installation and Commissioning of DOUBLE HEALTH WALKER / AERIAL STROLLER DOUBLE / AIR WALKER / FUN WALKER DOUBLE with three prime stand pipes shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Pedestal frame shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Handle frame shall be minimum of 25mm NBdia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The two pedestal frames are hinged over 100NB prime stand pipes with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. Foot rest shall be made of Aluminum material - LM26 grade. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion.. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall beriveted on 5mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene CoPolymer (PPCP) and UV- stabilized should be used. All products of Equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630 with one year uncoditional warranty. This Equipment will be fixed at Triangle Park, Santhi nagar Area." "TRIPPLE TWISTER SIZE (L x W xH): 1400X1400X1300 mm (± 10% tolerance allowable)Supply, Delivery, Installation and Commissioning of HD WAIST TWISTER / TRIPPLE TWISTER with prime pipe shall be minimum of 100mm NB dia of thickness not less than 5.00mm, Standing twister plate support pipe shall be inimum of 80mm NB dia of thickness not less than 4.5mm, Bottom frame upport shall be minimum of 32mm NB dia of thickness not less than .6mm & Handle ring shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. The twister plate is hinged over 80NB standing pipe with the help of specially heavy dutyBearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UVstabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630. with one year unconditional warranty. " "FORE ARM TWIRL DOUBLE SIZE (L x W x H): 1200X500X1450mm (± 10% tolerance allowable) Supply, Delivery, Installation and Commissioning of TAI CHI SPINNER / FORE ARM TWIRL OUBLE with center pipe shall be of minimum 100mm NB dia of thickness not less than 5.00mm, Support frame shall be minimum of 32mm NB dia of thickness notless than 3.6mm & TAI CHI SPINNER rings shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded with Handle knobs are made from high quality nylon material. The rings are hinged over 32NB support frame with the help of specially heavy duty bearings should be reputed make and press fitted for smooth rotation, and does not require re-lubrication i.e., maintenance - free ball bearing. All pipes shall be uniformly powder oated up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UVstabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced roof of valid certificate conformity to EN16630. With one year unconditional warranty. This Equipment will be fixed at Triangle Park, Santhi nagar Area." ABS Board Single ABS BOARD SINGLE ABS STATION SIZE (L x W x H): 1700X1300X900 mm (± 10% tolerance allowable) Supply, Delivery, Installation and Commissioning of SINGLE SIT UP BOARD / SINGLE ABS STATION /HD SIT UP STATION with center pipe & prime stand sleeve shall be minimum of 100mm NB dia of thickness not less than 5.00mm,Footrest support & sit up board support pipe shall be minimum of 50mm NB dia of thickness not less than 4.1mm, Handle frame & seat frame support shall be minimum of 32mm NB dia of thickness not less than 3.6mm & Connecting link pipes shall be minimum of 25mm NB dia of thickness not less than 3.60mm are of 'C' class heavy grade of TATA/JINDAL make with hot dipped galvanised with minimum of 75 microns zinc dipped joint with robotic welded. Sit up board made with high quality FRP / SS304 perforated material. All pipes shall be uniformly powder coated up to minimum 100 microns thickness to avoid corrosion. The foundation pipe with anchoring shall be 750mm deep with minimum of 100mm NB dia supported with M.S. Angle 25X25X4mm. The instruction plate of size 150mmX230mm of SS 304 grade Plate with 0.7mm thick shall be riveted on 5mm thick plate with your company emblem at two sides facing to users with LASER printing. All plastic parts should solid poly propylene Co-Polymer (PPCP) and UV stabilized should be used. All products of equipment should be manufactured as per EN 16630 safety norms and to be produced proof of valid certificate conformity to EN16630 with one year unconditional warranty. Providing and Laying of Interlocking Concrete Block Pavements of Glass fibre Reinforced Concrete Pavers of Size 225 x 175 mm and thickness of not less than 60mm heavy duty conforming to IS 15658:2006 in all shapes and designs as per the manufacturer's specification and finished to match with the colour of the designer blocks etcincluding cost and conveyance of all materilas and all labour charges etc complete as per SS and as directed by the departmental officers.
|
