Tender For Various Type Maintenance Work Against M R Under Jurisdiction Of Edd, Nadarganj, Amousi Zone, Lesa ... in India

Work Detail

Tender For Various Type MAINTENANCE Work Against M R Under Jurisdiction Of Edd, Nadarganj, Amousi Zone, Lesa, Lucknow- 1 Safe carriage, loading and unloading of following material from ESC Daliganj Lucknow in work site J.E. dump store 2 Line Material 3 PCC Pole 8.5/9 Mtr long. 4 S.T.P. Pole 9/11 Mtr. Long 5 Repairing of damage/Rusted Steel Tubular Pole by diggingof pit up to2 for proper position, Putting 3 Nos. Angle From of size 35x35x6 mm, 3 Long properly welding on 3 circle with pole than Grouting and Plinthing 300 mm Above level with cement concrete and sand and bricks ballast, (All material, labour and T&P will be provided by the Contractor) 6 Opening and dismantling of all the wire and accessories from tilted pole and digging the pit for Strengthening of existing tilted support of HT/LT lines after strengthening of tilted pole fixing of all accessories and re-stringing of old HT/LT line with help of T&P. 7 Dragging of ST/PCC Pole to pit site, digging of pit erection and grouting (As per RESPO Norms) of 11 KV linewith fixingof necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Guarding angle (1.8 mm 65x65x6) with Nut & boltsits ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department. 8 Dragging of ST/PCC Pole from Dump Store to pit site, digging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 8.5 Mtr Long PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as perRESSPO Specification.Only Pole will be Provided by the Department. 9 Well type earthing of with 60 Fit Deep boring and providing GI Pipe 1.5 dia (B Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor. 10 Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I. All Material provided by contractor. 11 Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor. 12 Resagging of Damage L.T/ ABC Line, opening of ABC at service point from distribution box and opening of Consumer service cable after Re-saggingof ABC Re Connection of Consumer Service cable on ST Pole/PCC . (All material will be arranged by the Contractor) 13 Resagging of damage H.T. line along with spare parts for various spans. 14 Replacement of damage/burned and Proper laying & commissioning of (3x50/3x95/3x120 sq.mm) XLPE Aerial Bunched Conductor. Only ABC Provided by department. 15 Painting of ST pole with one coat of red oxide & two coats ofbest quality top 2 mtr PO Red paint and remaining Al. Paint ISI mark as per RESPO norms. 16 Lopping & Chopping of tree branches for clearance of HT/LT line. After clearance of line throughout pieces of tree branches of site. 17 GST Extra as per Rules

Contact Information

Other Detail