|
Tender for Work Of Furnishing And Repairing Video Conferencing Room (Vwdc) In The District Court Premises Of Aligarh District. - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. AS Per DSR Ch-4, S.I. 15.56 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) .AS Per DSR Ch-4, S.I. 4.1.8(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 3 Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platformAS Per DSR Ch-5, S.I 5.9.3 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 4 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels,bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).AS Per DSR Ch.-5, SI No.5.3 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand)Ch-6, S.I. 2. DSR No.6.4.2. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 6 Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more..AS Per DSR Ch-5, S.I 5.22A.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 7 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floatingC oat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. As per DSR Ch-13 S.I.13.16 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 8 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) AS Per DSR Ch-13, S.I 13.4.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 9 15 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) AS Per DSR Ch-13, S.I 13.5.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 10 Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete..AS Per DSR Ch-13, S.I 13.80 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 11 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades,except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.AS Per DSR Ch-11, S.I. No.11.37 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 12 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete..AS Per DSR Ch-11, S.I.No.8.31. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 13 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. AS Per DSR Ch-13, S.I No. 13.48A (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 14 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. AS Per DSR Ch-13, S.I No. 13.41.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 15 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane :3 mm thick Ch 11 SI No.14.91.1 (Including cost of all Material, labour, T&P, Labour Cess and All other Taxes but Excluding G.S.T.) 16 Providing and LayingMurga Jali 1/2"× 24 gauge including supply of all material, labour, T & P etc complete Ch 1 SI No.21(iv) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 17 Providing and laying cement concrete in 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) including supply of all material, labour and T&P etc. required for proper completion of the work. In Foundation and floors.As per SORCh 5 Si No 4.1.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 18 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase. As per D.S.R. 2023 S.I. No. 12.21.1(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 19 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameterAs Per DSR Ch.-12,Item No.12.41.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 20 Excavating, supplying and filling of local earth by mechanical transport upto a lead upto 10km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. As Per DSR Ch.-1,Item No.1.1.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 21 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. DSR Ch- 11.41.2 Size of Tile 600x600 mm (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 22 Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately). .AS Per DSR Ch-21, S.I 21.14 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 23 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). .AS Per DSR Ch-21, S.I 21.18 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 24 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.As per DSR 2023 Ch26 SI NO 26.86.3 Frame size 50 x 100mm (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 25 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) .AS Per R Ch-26 SI No 26.87.1 (30 mm thick) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 26 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): As per DSR 2023 Ch 21 SI No 21.3.1 With float glass panes of 5.0 mm thickness (Weight not less than 12.5kg/sqm). (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 27 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.1,15 mm nominal dia Pipes. As per DSR 2023(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 28 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 18.8.2, 20 mm nominal dia Pipes. As per DSR 2023 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 29 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. 18.10.3, 25 mm nominal dia Pipes. As per DSR 2023(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 30 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal boreAs Per DSR Ch.-18,Item No.18.51.1(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 31 Supply and fixing of PTMT GratingAs per D.S.R. S.I 1858.1.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 32 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid As Per DSR Ch.-17,Item No.17.2.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 33 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.As er DSR 2023 S.I. 18.48 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 34 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillartaps, 32 mm C.P. brass waste of standard pattern, including painting offittings and brackets, cutting and making good the walls wherever require: White Vitreous China Surgeon type wash basin of size660x460 mm with a pair of 15 mm C.P. brass pillar taps withelbow including operated levers. As er DSR 2023 S.I. 17.7.8 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 35 Providing and fixing brass bib cock of approved quality : 20 mm nominal bore As Per DSR Item No.18.15.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 36 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete As Per DSR Item No.17.31 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 37 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore As Per DSR Ch.-18,Item No.18.53.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 38 Providing and fixing brass stop cock of approved quality : 15 mm nominal bore, As per DSR 2023 Item No. 18.16.1(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 39 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per DSR 2023 Item No.17.4.1(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 40 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190gms As per DSR 2023 Item No.17.73.2(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 41 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. As per DSR 2023 Item No. 4.17 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 42 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. As per DSR 2023 Item No. 11.27 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 43 Providing and fixing in position wall panelling at all heights with integral densified calcium silicate panels/tiles of size 595 x 595 mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity <0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanised mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e.vertical studs of size 48 x 34 x 36 mm are placed at 600 mm centre to centre in a floor and ceiling channel section of size 50 x 32 mm fixed to the floor and soffit at 600 mm centre using 12 mm dia,50 mm long wedge type expanded zinc alloy dash fastner with 10 mm bolt. This same channel is then to be fixed in horiziontal direction at 600 mm centre to centre so as to form a grid of 600 mm x 600 mm. Glasswool of 50 mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50 mm wide (90 metre )roll and two coats of primer suitable for panelling as per manufacturer’s specification as per direction of Engineerin- Charge all omplete.With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles.AS Per DSR Sr 26.24.1 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 44 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate cross-T of size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in- Charge.With 15 mm thick tegular/butt edged without perforation plain/designer light weight calcium silicate Anti-Microbial Bio-Safe coated false ceiling tiles Confirming to JIS-Z2801 and ASTM G-21 As Per DSR SR26.22.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 45 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C. As per DSR 2023 Item No. 1313 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 46 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 As per D.S.R. 2023 S.I 19.7.1.1(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 47 Supply and fixing of SOFA 5 Seater Sofa With Latherite Cover. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 48 Supply and fixing of Gross RectangularCenter Table With Flat glass Top of 1194X584mm(Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 49 Supply and fixing of V J Interior Meeting Table (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 50 Supply and fixing ofGodrej Interio Cantilever office Non Revolving and Non - Tilting chair with armrest Visitor Chair. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 51 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete 25 mm diameter. As per D.S.R. 2023 Ch- 14 S.I. 14.28.2 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 52 Supply and fixing of KAIROTECH- Kairo Furniture Interior Polyster Plain Door Curtains. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 53 Supply and fixing of Mirzapur - Carpets GeM Mirzapur Carpets - ODOP 7 feet X 5 feet (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 54 Supply and fixing Sony Type / Category/Class of TV Set Smart TV(2) Acyual screen size 55 inch or Equivalents Co. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 55 Supply and fixing O"General KJT series 2 Ton 5 Star got & Cold Inverter Split A.C Copper Condenser ASGG24KJTA-B (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 56 Supply and fixing of 3600 recording Camera ( 03 Nos) Complete (As per M/R) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 57 Supply and fixing Durian Executive Table with Both Side Pedstal unit. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 58 Supply and fixing Durian Revolving Chairwith Tilt Working with torsion bar mechanism. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 59 Wiring point for light with 1.5 sq mm. FRLSH PVC insulted multistrand single core copper conductor cable in heavy Guagerigid PVC conduit pipe concealed in the wall complete with 14 SWG copper earth continuity wire, GP Box, piano type awitch & Ceiling rose/ angle/ batten holder on3mm thick phenolic laminated backalite sheet etc Complete in all respect, as direct including matching colour wash Ch- 1 S.I. 131(C) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 60 Wiring point for Exhaust fan complete with 1.5 Sq. mm. PVC insulated single core aluminium conductor cable in heavy guage PVC conduit pipe with 1.5 sq. mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit, concealed in the wall, complete GP Box, piano type switch & ceiling rose/angle/batten holder on 3mm. thick phenolic laminated backelite sheet etc., complete in all respects, as directed including matching colour. S.I. 137( C) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 61 Supply & fixing of LED tube light with batten suitable for up to 1 x22 watt. LED tube light including tube etc on surface complete in all respect. S.I. 1413 CAT-AA (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 62 Supply & fixing of 40 Amp. DP MCB (10 KA) C Curve. S.I. 1010 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 63 Supply & fixing of Power Plug with 15A/250 Volts Flush type Switch and 5 pin 15 A/250 Volts flush type Socket Complete. S.I. 1139. (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 64 Supply and fixing of havells Wall Mounting Type Air Circulator Electric Fan having 600 millimeter mm Sweep Size. (As per Gem Govt. E-Marketplace) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 65 Supply and fixing of BAJAJ Exhaust Fan 300 mm(As per Gem Govt. E-Marketplace) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 66 Supply and fixing of electronic fan regulator (Modular0 120-180 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of the work to the satisfaction of Engineer in Charge of work. Ch-12, S.I. 1203(C) (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.) 67 S/F of recess /surface/pendent mounting36 watt 46 wattin door recessled square fitting down lighter having powder coated die cast aluminium housing with heat sink, diffuser/reflector and driver set complete in all respect .CH 14 SI 1406 (Including cost of all material, labour, labour cess and all other taxes but excluding G.S.T.)
|
