|
Supply And Installation Of Furniture And Modular Kitchen For Different Mines Of Omc , Description , Supplyingand Fixingof Modular Wardrobe With Door(S) And One Mirror Fixed On Door With 600 Mm Depth (+/10%) Made Up Of Hdhmr (High Density High Moisture Resistance) Board With Approve Shade Of 1 Mm Laminate At Expose Side & Inside 0.8 Mm Laminate (Total Finished Board Thickness - 18Mm) Of Approved Shade And Approved Design Unit. All Laminates Has To Be Hot Pressed With D3 Glue (Jowat/Henkel/Kleiberit Glue), The Said Storage Should Have Two Side Panels & A Bottom Panel & A Top. It Should Be Provided With A Back Panel Made Out Of 6 Mm Thickness Both Side Laminated Board. It Should Have Multiple Shutters According To The Length. The Wardrobe Should Be Provided With Shutters Mounted On To The Cabinets By Full Overlay Auto Shut Hinges. All Hinges And Steel Will Be Of Ss304 Grade. It Should Be Provided With Internal Shelves For Storage & Top Side Provision For Hanging Cloths. It Should Be Provided With Handles With Lock. All Exposed Edges Should Be Mechanically Edge Banded By Pvc Tape And Hotmelt Glue. It Should Have Lockdown Arrangement For Fitting. It Should Be Provided With 100 Mm Plinth Adjuster On The Bottom. All Hardware Fittings Will Be Of Hettich/Hafele/Ebco Make.The Dimension For Length And Height Shall Be As Per Individsal Site And Particular Roomrequirement. The Wardrobe May Be Of Either Two Door Or Three Door Confirming To The Above Specifciation As Per Individual Site And Room Requirement. The Bidder Is Requested Visit Each Site Prior To Submission Of Bid And Manufacturing. (To Be Installed At Quarters, Hostel, Guest House, Hospital, School, Office Building Etc. As Per Site Requirement) , 4 Seater Rectangular Wooden Working Table Made Out Of Kiln Seasoned Solid Wood Teak Of Size 1800Mm (L) X 750Mm (W) X 900Mm (H) For Lab. The Design Is Shown In The Picture. , Wooden Sitting Stool Made Out Of Kiln Seasoned Solid Wood Teak Wood Of Size 40.6Cm L X 40.6Cm W X 45.7Cm H. The Design Is Shown In The Picture. , Queen Size Bed (Without Storage) With Bed Side Table (One No. On Each Side)(1580X2050x325)Mm With Includes Side Panel, Leg Board And Head Board Height(Of Size 1000 Mm) Center Support (One Vertical & Three Horizontal Support Made Out Of Hard / Soft Wood) Made Out Of 25Mm Bwp Solid Plywood (Water And Termite Proof) With 1Mm Approved Shade Laminate And The Mattress Rest Will Be 12Mm Thick Ply. The Said Bed Side Table Made Out Of 16Mm Calibrated Bwp Plywood With Approve Shade Of 1Mm Laminate. It Should Have Two Side Panels & A Bottom Panel & A Top. It Should Be Provided With A Back Panel Made Out Of 6Mm Thickness. It Should Be Provided With Two Drawer For Storage. All (1580X205 Pressing Laminate On To The Ply Has Be Executed Mechanically Hot Press With Polymersied D3 Adhesive (Kleiberit/Jowat/ Henkel). The Non-Exposed Area Will Be Cover Up By 0.8Mm Balancer Laminates. All Exposed Edges Should Be Mechanically Edge Banded With Pvc Tape ( Rehau/Dolkan) & Hot Melt Glue (Jowat/ Henkel & Kleiberit). All Hardware Fittings Will Be Of Hettich/Ebco Robe Is Shown In The Picture.Wn Arrangement Of Fitting. The Design Of The Queen Size Bed With Head Board & Bed Side Table Is Shown In The Picture. Bed Side Table-400X400x450mm. Unit Made Out Of Plywood With 1Mm Approved Shade Laminates. The Cabinet Panel Thickness Will Be 18Mm And Back Panel Is 6Mm. The Pvc Base Plinths Are Provided At The Bottom. The Whole Furniture Is Knock Down. All Hardware Fittings Will Be Hettich/Ebco Make , Mattress With Two Pillow For Above Queen Size Bed-6Thick Supplying And Placing Of Mattress For Above Queen Size Bed- 6 Thick, Make: Bombay Deying/ Godrej/Spring Air/Sleepwell/Relaxwell / Kurion/King Coil. Fabric: Comfortable Fabric To Regulate Moisture And Temperature, Plush Quilt With Double Foam Layer, With Comfort Layer Body Support Foam For Optimum Alignment And Pressure Release On A Box Top Separation Layer. Support Layer Ortho Support Foam For That Recommended Firmness. Warranty: 10 Years Minimum. , Single Size Bed (Without Storage)960X2050x325mm With One Side Table Which Includes Side Panel, Leg Board And Head Board Height(Of Size 1000 Mm) Center Support (Two Horizontal Support Made Out Of Hard / Soft Wood) Made Out Of 25Mm Bwp Solid Plywood (Water And Termite Proof)) With 1Mm Approved Shade Laminate And The Mattress Rest Will Be 12Mm Thick Ply. All Pressing Laminate On To The Ply Has Be Executed Mechanically Hot Press With Polymersied D3 Adhesive (Kleiberit/ Jowat / Henkel). The Non-Exposed Area Will Be Cover Up By 0.8Mm Balancer Laminates. All Exposed Edges Should Be Mechanically Edgebanded With Pvc Tape (Rehau/Dolkan) & Hot Melt Glue (Jowat/ Henkel & Kleiberit). All Hardware Fittings Will Be Of Hettich/ Ebco Make. It Should Have A Knockdown Arrangement Of Fitting. The Design Of The Single Size Bed With Head Board Is Shown In The Picture. Bed Side Table-400X400x450mm. Unit Made Out Of Plywood With 1Mm Approved Shade Laminates. The Cabinet Panel Thickness Will Be 18Mm And Back Panel Is 6Mm. The Pvc Base Plinths Are Provided At The Bottom. The Whole Furniture Is Knock Down. All Hardware Fittings Will Be Hettich/Ebco Make. , Mattress With One Pillow For Above Single Size Bed-6Thick Supplying And Placing Of Mattress For Above Queen Size Bed- 6 Thick, Make: Bombay Deying/ Godrej/Spring Air/Sleepwell/Relaxwell / Kurion/King Coil. Fabric: Comfortable Fabric To Regulate Moisture And Temperature, Plush Quilt With Double Foam Layer, With Comfort Layer Body Support Foam For Optimum Alignment And Pressure Release On A Box Top Separation Layer. Support Layer Ortho Support Foam For That Recommended Firmness. Warranty: 10 Years Minimum. , Bed Side Table-400X400x450mm. Unit Made Out Of Plywood With 1Mm Approved Shade Laminates. The Cabinet Panel Thickness Will Be 18Mm And Back Panel Is 6Mm. The Pvc Base Plinths Are Provided At The Bottom. The Whole Furniture Is Knock Down. All Hardware Fittings Will Be Hettich/Ebco Make , Wooden Center Table(Round Shape, 600Mm Dia & 450Mm Ht.) Made Out Ofklin Seasoned Solid Wood ( Ash, Oak & Teak) With Four Legs Size (18Mmx 80Mm) Fixed On It Central Basis With A Top Resting On It. The Edge Of The Top Has To Be Inward Chamfer To Thin Look. It Should Be Finish Withtwo Coats Of Sealerand One Pu Pigment Top Coat As Per Thespecification Match With Ral Shade Card.(Sirca Paint, Teknovace Wood Coating) Buffer Should Be Fixed At The Bottom Of The Legs. It Should Have A Knockdown Arrangement Of Fitting.The Design Of The Centre Table Is Shown In The Picture. , Wooden Center Table(1200X650x450mm) Made Out Ofklin Seasoned Solid Wood ( Ash, Oak & Teak) With Four Legs Size (18Mmx 80Mm) Fixed On It Central Basis With A Top Resting On It. The Edge Of The Top Has To Be Inward Chamfer To Thin Look. It Should Be Finish Withtwo Coats Of Sealerand One Pu Pigment Top Coat As Per Thespecification Match With Ral Shade Card.(Sirca Paint, Teknovace Wood Coating) Buffer Should Be Fixed At The Bottom Of The Legs. It Should Have A Knockdown Arrangement Of Fitting.The Design Of The Centre Table Is Shown In The Picture. , Table With Fixed Storage- 1350X600x750mm Thetabletopmadeoutof25mmpostlaminationwith Plywood Having Two Side 18Mm Panels Continuing Up To The Floor Connected By A 18Mm Thick Modesty Panel. The Designofthetablewithfixedstorageisshowninthe Picture. , Study Chair Size- 480W X 440D X 750H Made Out Of Kiln Seasoned Solid Wood (Ash, Oak & Teak) The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By One Top Coat In Pu. The Pu Laquer Form Sirca / Teknovance (Italy). The Design Of The Study Chair Is Shown In The Picture. , Study Chair With Arm Size- 480W X 440D X 750H Made Out Of Kiln Seasoned Solid Wood (Ash, Oak & Teak) The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By One Top Coat In Pu. The Pu Laquer Form Sirca / Teknovance (Italy). The Design Of The Study Chair Is Shown In The Picture. , Single Seater Sofa Made Out Of Solid Wood (Ash, Oak & Teak Seasoned) Of Size In Mm- 820(L) X 790(D) X 750(H) Having Fabric With Polyurethane Foam (Cushion Foam Density- 40, Super Soft Foan-542, Seating Cushion Thickness 150Mm & Back Rest 100Mm, Cushion Cover With Zip Facility Easy To Remove And Wash) Inside Structue Wooden Frame, 1.08 Wooden Hand Rest & 40Mm Wooden Leg.The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By One Top Coat In Pu. The Pu Laquer Form (Sirca Paint, Teknovace Wood Coating & Emporio). It Should Have Knockdown Arrangement Of Fitting. All Hardware Should Be Of Kapasi/Hettich & Hafele Make The Design Of The Sofa Is Shown In The Picture. , Two Seater Sofa (Size 1330(L) X 790(D) X 750(H)Made Out Of Solid Wood (Ash, Oak & Teak Seasoned) Of Size In Mm- 820(L) X 790(D) X 750(H) Having Fabric With Polyurethane Foam (Cushion Foam Density- 40, Super Soft Foan-542, Seating Cushion Thickness 150Mm & Back Rest 100Mm, Cushion Cover With Zip Facility Easy To Remove And Wash) Inside Structue Wooden Frame, 1.08 Wooden Hand Rest & 40Mm Wooden Leg.The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By One Top Coat In Pu. The Pu Laquer Form (Sirca Paint, Teknovace Wood Coating & Emporio). It Should Have Knockdown Arrangement Of Fitting. All Hardware Should Be Of Kapasi/Hettich & Hafele Make The Design Of The Sofa Is Shown In The Picture. , Three Seater Sofa Made Out Of Solid Wood (Ash, Oak & Teak Seasoned) Of Size In Mm- 1820(L) X 790(D) X 750(H) Having Fabric With Polyurethane Foam (Cushion Foam Density- 40, Super Soft Foan-542, Seating Cushion Thickness 150Mm & Back Rest 100Mm, Cushion Cover With Zip Facility Easy To Remove And Wash) Inside Structue Wooden Frame, 1.08 Wooden Hand Rest & 40Mm Wooden Leg.The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By One Top Coat In Pu. The Pu Laquer Form (Sirca Paint, Teknovace Wood Coating & Emporio). It Should Have Knockdown Arrangement Of Fitting. All Hardware Should Be Of Kapasi/Hettich & Hafele Make The Design Of The Sofa Is Shown In The Picture. , Nested Type Center Table In Pair (Round Shape 600Mm Dia & 450Mm Ht.) Made Out Of Klin Seasoned Solid Wood (Ash, Oak & Teak) With Four Legs Size 40X40mm Fixed On It Central Basis With A Top Resting On It. All The Section Hot Pressed With Approve Shade Of Veneer. The Edge Of The Top Has To Be Inward Chamfer To Thin Look. Leg Shuild Be Finish With Wood. It Should Be Finish With Two Coats Of Sealer And One Pu Pigment Top Coat As Per The Specification Match With Ral Shade Card (Sirca Paint, Teknovace Wood Coating) Buffer Should Be Fixed At The Bottom Of The Legs. It Should Have A Knockdown Arrangement Of Fitting. The Design Of The Centre Table Is Shown In The Picture. , Tv Panel With Ledge (Size: 1350X200x1050mm) Made Out Of 16Mm Calibrated Bwp Plywood With 1Mm Approved Shade Laminate. All Pressing Laminate On To The Ply Has Be Executed Mechanically Hot Press With Polymersied D3 Adhesive (Kleiberit/Jowat/Henkel). The Non-Exposed Area Will 1.1 Be Cover Up By 0.8Mm Balancer Laminates. All Exposed Edges Should Be Mechanically Edge Banded With Pvc Tape (Rehau/Dolkan) & Hot Melt Glue (Jowat/ Henkel & Kleiberit). It Should Have Necessary Provision For Cable & Date. The Design Of The Tv Panel With Ledge Is Shown In The Picture. , Supplying And Placing Of Conference Table Of Size 6000X1650x750mm (Vineer Finish) & Pu Polished Of Approved Make & Shadecomplete. , Dining Chair Of Size ( 25 X D 25 X H 34) Made Out Of Kiln Seasoned Solid Wood (Ash/Oak/Teak) And Cane Finished Wicker Back With Melamine Pu Coat Polish Usegood Quality Foam And Dry Shampooing Fabric (Black Matte Finished Leg) , Dining Table Of Size 5 X D 26 Made Out Of Kiln Seasoned Solid Wood (Ash/Oak/Teak) Top With Melamine Pu Coat Polish Ms Base With Powder Coating(Black Matte Finished Leg). , Reception Table With Side Storage Reception Tablewithside Storage (2400X600x1050) Mm &(1000X450x750) Mm (Vineer With Corianfinish) Made Out Of16mm Calibratedbwp Plywood With Approved Shade Ofveener Or Pu For Shutter And Carcass. The Top Of Reception Table Will Be Cover Withapproved Shade Of Corian & Front Of The Table Will Be Cover With Fluted Panel & Corian.All Exposed Edges Should Be Mechanicllay Edge Banded By Matching 1Mm Thick Veneer Edge Banding With Hot Melt Gule (Kleiberit/Jowat / Henkel). All Pressing Venner On To The Ply Has Be Executed Mechanically By Hot Press And Polymersied D3 Adhesive (Kleiberit/ Jowat / Henkel). The Non Exposed Area Will Be Cover Up By 0.8Mm Balancer Laminates. The Same Furniture Will Be Finished With Two Coats Of Sealer Followed By Onetop Coat In Pu. The Pu Laquer Form Sirca Paint / Teknovace (Italy) It Should Have Knock Down Arrangement Of Fitting. All Hardware Fitting Will Behettich / Hafele-Blumthe Design Of The Reception Table Is Shown In The Picture. , Supplying And Fixing Of Modular Kitchen Units With Horizontal As Well As Vertical Partitions And Shutters Below The Kitchen Platform - 500 Mm Depth (+/-10%). Unit Made Up Of Hdhmr (High Density High Moisture Resistance) Board With Approve Shade Of 1 Mm Laminate At Expose Side & Inside 0.8 Mm Laminate (Total Finished Board Thickness - 18Mm) Of Approved Shade And Approved Design Unit. All Laminates Has To Be Hot Pressed With D3 Glue (Jowat/Henkel/Kleiberit Glue), The Said Storage Should Have Bottom Panel. It Should Be Provided With A Back Panel Made Out Of 6 Mm Thickness Both Side Laminated Board. It Should Have Multiple Shutters According To The Length.All Hinges And Steel Will Be Of Ss304 Grade. All Exposed Edges Should Be Mechanically Edge Banded By Pvc Tape And Hotmelt Glue.It Should Be Provided With 100 Mm Plinth Adjuster On The Bottom. All Hardware Fittings Will Be Of Hettich/Hafele/Ebco Make.Provision Of Standard Storage Space To Be Made For Gas Cylinder Storage, Drawers, Cutlery Basket, Cup & Saucer Basket, Thali Basket, Plain Multipurpose Baskets, Three Tier Oil/Masala Pull Out, Detergent Pull. All Hinges And Steel Will Be Of Ss304 Grade. The Dimension For Length And Height Is As Per Site Requirement. The Bidder Is Requested Visit Each Site Prior To Submission Of Bid And Manufacturing. , Supplying And Fixing Of Modular Kitchen Units With Vertical Partitions Only And Foldabe Shutters Below The Kitchen Platform -500 Mm Depth (+/-10%). Unit Made Up Of Hdhmr (High Density High Moisture Resistance) Board With Approve Shade Of 1 Mm Laminate At Expose Side & Inside 0.8 Mm Laminate (Total Finished Board Thickness - 18Mm) Of Approved Shade And Approved Design Unit. All Laminates Has To Be Hot Pressed With D3 Glue (Jowat/Henkel/Kleiberit Glue), The Said Storage Should Have Bottom Panel. It Should Be Provided With A Back Panel Made Out Of 6 Mm Thickness Both Side Laminated Board. All Hinges And Steel Will Be Of Ss304 Grade. All Exposed Edges Should Be Mechanically Edge Banded By Pvc Tape And Hotmelt Glue.It Should Be Provided With 100 Mm Plinth Adjuster On The Bottom. All Hardware Fittings Will Be Of Hettich/Hafele/Ebco Make.Provision Of Standard Storage Space To Be Made. All Hinges And Steel Will Be Of Ss304 Grade. The Dimension For Length And Height Is As Per Site Requirement. The Bidder Is Requested Visit Each Site Prior To Submission Of Bid And Manufacturing. , Supplying And Fixing Of Overhead Storage Units For Modular Kitchen Units With Vertical As Well As Horizontal Partitions And Shutters Above The Kitchen Platform - 250 Mmdepth (+/-10%). Unit Made Up Of Hdhmr (High Density High Moisture Resistance) Board With Approve Shade Of 1 Mm Laminate At Expose Side & Inside 0.8 Mm Laminate (Total Finished Board Thickness - 18Mm) Of Approved Shade And Approved Design Unit. All Laminates Has To Be Hot Pressed With D3 Glue (Jowat/Henkel/Kleiberit Glue), The Said Storage Should Have Bottom Panel. It Should Be Provided With A Back Panel Made Out Of 6 Mm Thickness Both Side Laminated Board.All Hinges And Steel Will Be Of Ss304 Grade. All Exposed Edges Should Be Mechanically Edge Banded By Pvc Tape And Hotmelt Glue.It Should Be Provided With 100 Mm Plinth Adjuster On The Bottom. All Hardware Fittings Will Be Of Hettich/Hafele/Ebco Make.Provision Of Standard Storage Space To Be Made For, Cutlery Basket, Cup & Saucer Basket, Thali Basket, Plain Multipurpose Baskets, Three Tier Oil/Masala Pull Out, Detergent Pull. All Hinges And Steel Will Be Of Ss304 Grade. The Dimension For Length And Height Is As Per Site Requirement. The Bidder Is Requested Visit Each Site Prior To Submission Of Bid And Manufacturing. , Washing Unit Below The Sink Two Door Cabinet Without Shelf Unit Made Up Of Hdhmr (High Density High Moisture Resistance) Board With Approve Shade Of 1 Mm Laminate At Expose Side & Inside 0.8 Mm Laminate (Total Finished Board Thickness - 18Mm) Of Approved Shade And Approved Design Unit. All Laminates Has To Be Hot Pressed With D3 Glue (Jowat/Henkel/Kleiberit Glue), The Said Storage Should Have Bottom Panel. It Should Be Provided With A Back Panel Made Out Of 6 Mm Thickness Both Side Laminated Board.All Hinges And Steel Will Be Of Ss304 Grade. All Exposed Edges Should Be Mechanically Edge Banded By Pvc Tape And Hotmelt Glue.It Should Be Provided With 100 Mm Plinth Adjuster On The Bottom. All Hardware Fittings Will Be Of Hettich/Hafele/Ebco Make , Supplying And Installing Chimney In The Kitchen Kitchen Autoclean Function And A Chimney With 90Cm Autoclean Technology With 1350±50M³/Hr Suction Capacity, Colour: Black, Special Feature: Touch Control, Led Light Material:Alloy Steel Suction (M3/H) : 1350±50M³/Hr Auto Clean Type : Dry, 3Rd Generation Switch Control : Touch Control With Wave Sensor Warranty: 2 Year On Product, Control: 3 Speed Motion Sensor Touch Control; Auto Clean: Heat Auto Clean; Phase: Single-Phase; The Chimney Duct Should Be Caged With Proper Wooden Box Matching With The Kitchen Shelf Interior For Chimney Outlet To The End Of Exhaust. The End Of Exhust Duct Should Be Provided With Outside Protetion. Preferred Make: Faber/ Glen/ Prestige/ Sunflame/ Kutchina/ Requpted Equivalent Brand. Note: Technical Catalogue With Detailed Specification Of The Quoted Chimney Brand & Make To Be Indicated And Submitted Alongwith The Bid. The Brand Must Have Service Facility And Amc Facility In All The Areas In The State Of Odisha.
|
