|
Surfer Santa Claus In 3D Fiberglass – Three-Dimensional, Santa Claus Made Of Fiberglass, Approximate Size 2.15M Height X 1.20M Width X 0.65M Depth. Sculpture Produced In Fiberglass, Application Of Gel Coat For Weather, Automotive Pu Painting, With Application Of Automotive Pu Varnish. Clothing; Set Consisting Of Shorts, Open Front Shirt, Sunglasses, Red Beanie In One Hand And Holding A Surfboard In The Other. Pieces With Self-Finishing, Without The Appearance Of Patches Or Visible Fibers. Fixed To The Left Side Of The Existing Concrete Sign “Torres”., Santa Claus Beach With Coconut Tree In 3D Fiberglass – Three-Dimensional, 15M Height X 0.90M Width X 0.85M Depth. Sculpture Made From Fiberglass, Shirt, Sandals On Feet, Red Cap, Propped On A Coconut Tree. Pieces With Self-Finishing, Without The Appearance Of Patches Or Visible Fibers. Fixed To The Right Side Of The Existing Concrete Sign “Torres”., Led Luminous Hose - Led Hose With Ip68 Protection, For Outdoor Use And With Weather Resistance, With Resistant And Transparent Pvc Coating, 13Mm 36 Leds Per Meter With Strobe Consistent Lighting . Warm Warm White Color, Voltage 220V. Attached To The Entire Contour Of Each Letter Of The Existing Concrete Sign “Torres”., Christmas Decoration Strobe Lamp Round Flash / Minimum Power Flash Strobos 10W 220V. Strobes With Bright Light Flashes, With Capacity To Emit Approximately 50 Flashes Per Minute, 6500K Cold White. Both Armored For External Use. Fixed To The Front Of The Existing Concrete Sign “Torres”, With Approximately 05 Units In Each Letter., Multiple Luminous Structural Arches - Element Produced In Galvanized Metal Structure And Electrostatic Painting In White Color To Avoid Weather On The Coast. Multiple Arches Formed By 7 Curvatures Of Metalon 30X30 Iron With Approximate Measurements 9.0 M Long X 5.0 M High Representing A Rainbow. Base With Locking For Self-Supporting Support. Luminous Arc Contoured On All Bends Of Luminous Hose Rgb Led Strip Ip 67, 120 Leds Per Meter, With Simultaneous Color Changing. External Use, Voltage 220V. Fixed On The Back Of The Existing Concrete Sign “Torres”., 11/11/2024, Luminous Metallic Structure Element. Two-Dimensional Illustrative Figure In The Form Of Double Arabesques, Approximate Measurement 1.90M X 0.90M. Produced In Metalon Structure 15.00Mm X 15.00Mm, Wall 1.20Mm Thick And Flat Bar Measuring 1/8 Contour And Application Of Luminous Hose In Transparent Extruded Flexible Pvc, In Warm Color, 13 Mm In Diameter, Cut Every Meter, With 36 Leds Per Meter With Strobe. Leds Lay Down For 360 Degree Viewing. Power 3 W/M. Indoor/Outdoor Use, 2-Wire Hose, Voltage: 220 Volts. Installed And Fixed On The Upper Arm Of The Existing Public Light., Enchanted Santa Claus – Enchanted Santa Claus Sculpture Made In Fiberglass, 25M Height X 1.00M Width X 0.95M Depth. Sculpture Produced In Fiberglass, With Application Of Automotive Pu Varnish. Clothing; Set Consisting Of A Long White Tunic With Gold Details, Ankle Boots And A Christmas Hat. Pieces With Self-Finishing, Without The Appearance Of Patches Or Visible Fibers. Fixing And Assembling The Scenographic Backdrop On The Existing Wooden Deck
|
