|
Automatic Hematology Analyzer, Nominal Speed Of 50 Samples/Hour – Closed Tube Modules And 60 Samples/Hour – Autoloader Mode, Operates With 4 Reagents (1 Diluent And 3 Lysers), Impedance, Photometry (Cyanide-Free Hemoglobin), Flow Cytometry By Laser With Chemical Dye, Independent Channel For Counting Basoliphs, Closed Tube Pipetting, Up To 40,000 Results, Including Numerical And Graphic Information, Lan Port: Supports The Hl7 Protocol, Allows You To Register Samples And Controls, And View Statistical Data And Graphics, Dimensions (Hxwxd) 52.5 X 59 X 57 Cm, Weight 58 Kg. Wide Participation, Analyzer Semi-Automatic Biochemical, 90 Programming Possibilities For Any Reagent (Open System), Reading Range: -0, 100 To 3, 500 Abs, Monochromator With 7 Filters: 340, 405, 505, 546, 578, 620 And 670 Nm, Band Passage 10 Nm For 340 E 06 Nm For Other Filters, Spurious Light: ≪ 0.01%T, Monochromatic And Bichromatic Readings, Continuous Flow From 150 Μl To 2.0 Ml, 32 Μl Metal Flow Cell Thermostatized To 25, 30, 37 ± 0.1 ºc, Absorbance Readings, End Point, Kinetic , Fixed Time, Differential, Kinetic Multiple, Readings With Standard, Multi Standard And Factor, Quality Control Statistics With Levey Jennings Chart, Printing Of Results With Built-In Graphic Printer, Complete Control Of The Kinetic Or Colorimetric Reaction, Power: 220 Volts 35 Va, Weight: 10 Kg, Registration Number At Anvisa. Participation Exclusively For Mei/Me/Epp, Centrifuge, Induction Motor, Speed Of 100-4500 Rpm, Rotor: Fixed Angle And Inclined Gel, Maximum Capacity Of 24X10 Ml, Electric Lock On The Lid, Lid Monitoring, Overspeed Protection , Automatic Internal Diagnosis, Dimensions 450X340x230 Mm, Net Weight Of 10 Kg. Participation Exclusively For Mei/Me/Epp, Agitator, Adjustable Speed Frequency: 0 – 230 Rpm, Orbital Agitation Radius: 22 Mm, Platform Dimensions (Wxxd): 224X80x152 Mm. Brushed Steel Motor. Participation Exclusively For Mei/Me/Epp, Analog Sterilization And Drying Oven, Control Panel: Thermometer, General On/Off Switch, Thermostat, Fuse Holder; Cabinet: Sae 1020 Carbon Steel Sheet, Textured Epoxy Electrostatic Painting With Anticorrosive Treatment, Door With Anatomical Handle And Opening To The Right, Internal Aluminum Type Painting Resistant To High Temperatures (Up To 600°C), Top Exit – Breather For Gases, Humidity Or Accommodation Of The Thermometer, Internal Rails For Moving The Trays, Roller Type Closure, Sealing With High Temperature Silicone Profile; Optional Accessories: Trays According To Table, Safety Fuse; Optional: Internal And/Or External In Aisi 430 Stainless Steel With Mirror Polishing, Rbc/Inmetro Equipment Calibration Certificate; Technical Specifications: Working Temperature: 50°C Up To 250°C – Others Upon Request, Temperature Control: Analog – Electromechanical Thermostat, Process Indication: Pilot Lamp, Power Cable: With 3-Pin Plug, Two Phases And One Earth , Nbr 14136, Heating System: Armored Resistance, Thermal Insulation: Glass Wool Thermal Insulation, Including The Doors, Air Circulation: Air Circulation By Natural Convection, Free From Noise, Power Supply: Bivolt Up To 150L, Larger Ones Set To 110V Or 220V. Participation Exclusively For Mei/Me/Epp, 11/11/2024, Autoclave, With Capacity Of 21 Liters Gross Weight 26, 8Kg, Lid Material
|
