|
Supply Of Various Types Of Rtds For Unit No. 1 To 7, Wtps.-PT-100 RTD (DUPLEX) WITH THERMOWELL FOR SECONDARY FLOW COMPENSATION, BULB DIA:8 MM,BULB LENGHT :1250 MM PT-100 RTD (DUPLEX) , BULB DIA: 6 MM ,BULB LENGTH : 300 MM, ADJUSTABLE FITTING WITH 1/2 BSP PROCESS CONNECTION. RTD, PT-100, DUPLEX, 4 WIRE MINERAL INSULATED WITHOUT HEAD (HEAD LESS), SHEATH DIA: 10 MM. FD FAN MOTOR (DE/NDE) BEARING TEMP. RTD, TYPE:PT-100 FD FAN, FAN BEARING DE TEMP. RTD, TYPE:PT-100 FOR STAGE-I,WTPS FD FAN (NDE) FAN BEARING TEMP. RTD, TYPE:PT-100 ID FAN (NDE) / PA FAN (DE/NDE/MIDDLE) FAN BEARING TEMP. RTD, TYPE:PT-100 WITH INSERTION LENGTH 270 MM AS PER DRG NO WTPS-002-1487 ID FAN,FAN BEARING TEMP RTD,TYPE:PT-100 ID /PA FAN MOTOR BEARING(DE/NDE) TEMP. RTD, TYPE:PT-100 AS PER DRG NO WTPS-002-1471. TURBINE THRUST PAD RTD PT-100 DUPLEX 3WIRE-RTD ,OD/LENGTH:4MM/20MM,CABLE LENGTH 3 MTR. PT-100 RTD WITH THERMO WELL FOR TURBINE BRG. DRAIN OIL TEMP.- RTD PT-100 DUPLEX4-WIRE FOR TURBINE DRAIN OIL TEMP.WITH INSERTION LENGTH: 115MM,EXTERTION LENGTH:160MM,SHEATH DIA.:8MM,PROCESS CONNECTION:M33 X 2(M) AS PER DRG NO.WTPS-002-957 PT-100 RTD WITH THERMO WELL FOR CW TEMP AT CONDENSER I/L&O/L-- RTD PT-100 DUPLEX4-WIRE FOR CW TEMP.AT CONDENSER I/L O/L WITH INSERTION LENGTH:800MM,EXTERTION LENGTH:200MM,SHEATH DIA.:8MM,PROCESS CON.:M33X2(M)AS PER DRG NO.WTPS-002-901 PT-100 RTD WITH THERMO WELL FOR BFP MOTOR BRG. TEMP.- RTD PT-100 DUPLEX 4-WIRE FOR BFP MOTOR BEARING TEMP. WITH INSERTION LENGTH: 60MM, OVERALL LENGTH: 270MM, SHEATH DIA.:6MM, PROCESS CONNECTION:1 INCH BSP (M) AS PER DRG NO. WTPS-002-958 CW PUMP MOTOR BEARING TEMP. RTDS PT. 100 CEP MOTOR BEARING RTDS PT.100 DUPLEX RTD WITH THERMOWELL FOR H2 DRYER. RTD-PT 100-SIMPLEX FOR BEBIT METAL TEMPERATURE PT-100 RTD (DUPLEX) FOR COAL MILL OIL RETURN LINE,BULB LENGTH : 50 MM PT-100 RTD (DUPLEX) FOR COAL MILL VERTICAL SHAFT THRUST ,BULB LENGTH :340 MM COAL MILL RETURN OIL LINE HEADLESS RTD TYPE: PT-100, BULB LENGTH-50MM,SHEATH DIA-6MM, OVERALL LENGTH:-50MM+37MM, 6 CORE TEFLON/TEFLON INSULATED SS BRAIDED FLEXIBLE CABLE 15 METER LONG ( 0 TO 80 DEG.C) WITH FLYING LEADS. COAL MILL WARM SHAFT THRUST BEARING HEADLESS RTD TYPE: PT-100 for stage II wtps, Bulb length-115mm,sheath Dia-6mm,Overall Length:-115mm+37mm,6 Core Teflon/Teflon Insulated SS Braided Flexible Cable 15 mtr long(0 to 80deg.) with Flying Leads COAL MILL VERTICAL SHAFT THRUST BEARING HEADLESS RTD TYPE: PT-100 FOR STAGE- II WTPS, BULB L.-340MM,SHEATH DIA-6MM,OVERALL L.:-340MM+37MM,6 CORE TEFLON/TEFLON INSULATED SS BRAIDED FLEXIBLE CABLE 15 MTR LONG(0TO80DEG.C)WITH FLYING LEADS. PT -100 RTD (DUPLEX) FOR COAL MILL WARM SHAFT ,BULB LENGTH:115 MM ID FAN (DE/NDE) FAN BEARING TEMP. RTD, TYPE:PT-100, AS PER DRG NO. WTPS-ST-II-002-872, ITEM NO. 2 FD FAN (DE/NDE) FAN BEARING TEMP. RTD, TYPE:PT-100, AS PER DRG NO. WTPS-ST-II-002-872, ITEM NO. 3 TEMPERATURE MEASUREMENT ELEMENTS RTD PT 100. PT-100 RTD (DUPLEX) WITH THERMOWELL FOR MILL INLET TEMPERATURE AND PA FLOW COMPENSATION,BULB DIA:8 MM, BULB LENGHT : 650 MM. PT-100 RTD WITH THERMO WELL FOR FOR COAL MILL INLET RTD, SHEATH DIAMETER: - 8.6 MM, OVERALL LENGTH: - 300 MM + 160 MM, THERMOWELL MATERIAL-INCONEL COAL AIR TEMP. RTD, TYPE:PT-100 RTD PT-100 WITH FLANGED THERMOWELL RTD FOR HFO TEMPERATURE : T/W INSERTION LENGTH L1 150 MM - T/W EXTN. LENTGH N1 27 MM - EXTN LENGTH EL 150 MM - OD 15 MM - ID 8.5 MM RTD FOR MILL/FD/ ID/PA MOTOR BRG TEMP FOR STAGE II, WTPS PA/ID Fan MOTOR RTD For unit 4 WTPS, 3-wire PT-100 Headless Duplex RTD,Sheath Diameter: - OD: 8 mm, ID: 6 mm,Overall Length: - 50 mm,6 Core PTFE insulated flexible lead wires Long 200 mm 34 BFP FW SUC./DISCH TEMP. RTDS. PT. 100 35 MINERAL INSULATED RTD. PT 100 WITH HEAD :SHEATH MATERIAL : SS 316 SHEATH DIA : 6 MM ELEM1NT:PT 100 AS PER DIN 43760 :100 OHMS AT 0:C,CLASS B,+/-0.12OHMS;DUPLEX 3 WIRE,COMPACTED MGO,LENGTH BELOW HEAD: 310 MM 36 MINERAL INSULATED RTD. PT 100 WITH HEAD :SHEATH MATERIAL : SS 316 SHEATH DIA : 6 MM ELEMENT:PT 100 AS PER DIN 43760 :100 OHMS AT 0:C,CLASS B,+/-0.12OHMS;DUPLEX 3 WIRE,COMPACTED MGO,LENGTH BELOW HEAD: 290 MM 37 MINERAL INSULATED PT100 RTD WITHOUT THERMOWELL,WITH CONNECTION HEAD, LENGTH OF RTD: 320MM 38 RTD PT 100, DUPLEX 3 WIRE UNGROUNDED, SHEATH MATERIAL SS316, SHEATH DIA 6MM, INSERTION LENGTH 300MM WITH ADJUSTABLE 1/2 INCH BSP FITTING, MINERAL INSULATED. 39 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 8 MM, SHEATH LENGTH: 430 MM 40 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 8 MM, SHEATH LENGTH: 380 MM 41 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 8 MM, SHEATH LENGTH: 370 MM 42 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 6 MM, SHEATH LENGTH: 270 MM 43 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 6 MM, SHEATH LENGTH: 285 MM 44 RTD, PT-100, DUPLEX, 3 WIRE MINERAL INSULATED SHEATH DIA: 8 MM, SHEATH LENGTH: 660 MM GENERATOR BEARING NO. 6 RTD PT-100, DUPLEX, SHEATH OD : 4 MM, SHEATH LENGTH : 25 MM, LEAD LENGTH : 3 METER WITH TEFLON INSULATED AND GI WIRE BRAIDED. MINERAL INSULATED SS 316 PT-100 RTD TWO WIRE SYSTEM (SIMPLEX), SHEATH OD=10MM , SHEATH/INSERTION LENGTH=270MM, PROCESS CONNECTION 1/2" BSP(MALE) COMPRRESSION TYPE FITTING ADJUSTABLE THROUGHT THE SHEATH LENGTH. RTD PT 100 with IMMERSION LENGTH 200MM RTD PT-100 WITH THERMOWEL ELEMENT : IS:2848,DUPLEX /UNGROUNDED T/W CONSTRUCTION STRAIGHT , MATERIAL : SOLID TUNGUSTEN CARBIDE PROCESS CONNE: SCREWED M 33 X 2, SS316 T/W INSERTION LENTH ( L1) 325 MM T/W OD :22 MM FD FAN (DE) FAN BEARING TEMP. RTD, TYPE:PT-100 RTD FOR PA FAN O/L / PA HDR / MILL HOT AIR / FD FAN SA O/L TEMPERATURE : T/W INSERTION LENGTH L1 1300 MM - T/W EXTN. LENTGH N1 70 MM - EXTN LENGTH EL 70 MM - DIA. 20.7 MM RTD FOR APH FG O/L TEMPERATURE : T/W INSERTION LENGTH L1 1500 MM - T/W EXTN. LENTGH N1 70 MM - EXTN LENGTH EL 70 MM - DIA. 25 MM RTD ELEMENT WITH TERMINAL BLOCK (MEASURING INSERT ONLY) FOR BFP DISCH./ HPH FW-GSC O/L / COND DISCH. / DRAIN COOLER - LPH-1 COND. I/L / CW TEMP. BEF. OIL COOLER / LPH O/L / COND. TO DEA TEMPEARTURE : SENSOR LENTGH 375 MM - DIA 8 MM RTD WITHOUT THERMOWELL FOR DEAERATOR HPH-6 FW O/L AND FW BEFORE FCS TEMPERATURE : SENSOR LENGTH 450 MM - DIA 8 MM RTD WITHOUT THERMOWELL FOR CEP SUC. HDR. TEMPERATURE / CW TEMPERATURE AT COND. O/L : SENSOR LENGTH 525 MM - DIA 8 MM RTD FOR THRUST BRG TEMP.OF BFP & BP, TYPE -3 WIRE SIMPLEX, ELEMENT:PT-100, ELEMENT LENGTH -10 MM, WORKING RANGE -0-100 C, MAX.RANGE 0-200 DEG.C, 3 WIRE, EXTEN.LENGTH: 6 M, PTFE INSULATED RTD FOR H.C. BRG OF BFP AS PER DRG.NO.WTPS.STIII-002-27, TYPE: PT-100X2, DUPLEX, 3 WIRE, ELEMENT LENGTH: AS PER DRG. WORKING RANGE -0-150 C, 3 WIRE, EXTEN.LENGTH: 6 M, CU STRAND 0.5 MM2, PTFE INSULATED RTD ASSEMBLY WITH HEAD FOR CWP THRUST BEARING TEMP, TYPE: PT-100X2 DUPLEX, 3 WIRE, ELEMENT: OD 6 MM, ELEMENT LENGTH 250 MM, CONNECTION: 3/8" BSP (F), MINERAL INSULATED, RANGE -0-150 DEG.C RTD PT-100 ELEMENT AS PER DRG.WTPS/ST-III/002/23 ITEM NO.1, APPLICABLE STANDARD ELEMENT IS-2848/PLATINUM, SHEATH MAT.SS.316, INSULATION COMPACTED MGO, CONN.: 3 WIRE, ELEMENT DUPLEX/UNGROUNDED, GAUGE 18 SWG, HEAD: FORGED ALUMINIUM WITH IP55. RTD PT-100 ELEMENT AS PER DRG.WTPS/ST-III/002/21, APPLICABLE STANDARD ELEMENT IS-2848/PLATINUM, SHEATH MAT.SS-316, INSULATION COMPACTED MGO, CONN.: 3 WIRE, ELEMENT DUPLEX/UNGROUNDED, GAUGE 18 SWG, HEAD FORGED ALUMINIUM WITH IP55. RTD PT-100 ELEMENT DIAMENTION AS PER DRG.WTPS/ST-III/002/22, APPLICABLE STANDARD ELEMENT: IS-2848/PLATINUM, SHEATH MAT.SS.316, INSULATION COMPACTED MGO, CONN.: 3 WIRE, ELEMENT DUPLEX/UNGROUNDED, GAUGE 18 SWG, HEAD FORGED ALUMINIUM WITH IP55 RTD PT-100 ELEMENT DIAMENTION AS PER DRG.WTPS/ST-III/002/20, APPLICABLE STANDARD ELEMENT: IS-2848/PLATINUM, SHEATH MAT.SS.316, INSULATION COMPACTED MGO, CONN.: 3 WIRE, ELEMENT DUPLEX/UNGROUNDED, GAUGE 18 SWG, HEAD FORGED ALUMINIUM WITH IP55 RTD PT-100 ELEMENT AS PER DRG.WTPS/ST-III/002/23 ITEM NO.2, APPLICABLE STANDARD ELEMENT IS-2848/PLATINUM, SHEATH MAT.: SS.316, INSULATION COMPECTED MGO, CONN.:3 WIRE, ELEMENT DUPLEX/UNGROUNDED, GAUGE 18 SWG, HEAD: FORGED ALUMINIUM WITH IP55 PT-100 RTD FOR FAN BRGS.
|
