|
The Subject Of The Order Is The Purchase Of A Brand New Soil Stabilizer (Road Crusher, Road Recycler) And Its Delivery To The Headquarters Of The Ordering Party - Prudnik Forest District - Ul. Dąbrowskiego 34, 48-200 Prudnik. Necessary Requirements Regarding The Subject Of The Order: Adapted To Work With The Valtra T255 V Agricultural Tractor Owned By The Prudnik Forest District, Power Take-Off Shaft Adapted To The Tractors Power, The Machine Is Factory-Designed For Installation On An Agricultural Tractor With A Rear Three-Point Suspension System Cat. Ii Or Iii Or Iv, Brand New - Production Year Required: 2024, Complete, Ready For Use, Suitable For Maintenance And Renovation Of Roads And Forest Trails, Unimproved, Improved, Hard Unimproved (Aggregate, Crushed Stone) With A Min. 0-31.5 Mm (Soil Stabilization With All Types Of Binders) And Processing Of Input Material, Recycling Of Material In The Field, Processing Of Clay, Crushing Stones, Asphalt, Tree Trunks, Land Reclamation, Work In Mountain Conditions On Rocky Substrates. Working Width Minimum 200 Cm, Net Weight Minimum 4000 Kg, Milling Depth Hydraulically Adjustable From The Operators Cabin (Rotor Lowered On Actuators), Possibility Of Completely Submerging The Machine, For Example During Land Reclamation, Minimum 20 Cm, Desired Fraction Size Achieved By Adjusting The Opening Of The Tailgate Additionally Equipped With A Special Comb / Poles Made Of Hardox Steel, Adjustable Independently Of The Flap Itself, As Well As By Adjusting The Gap Between The Rotor And The Built-In Movable Counter-Bar Made Of Hardox Steel, The Entire Internal Surface Of The Mixed Chamber Is Armored With Hardox Steel Plates, Plates Mounted On Screws, Single-Stage System For Mounting Working Tools : Heat-Hardened Handle Welded To The Rotor, Working Tools Attached With 1 Hardened Screw, Tool Body Design That Protects The Handle At Full Height From The Front, Sides And Top, Thanks To Which The Handle Is Almost Not Exposed To Abrasion During Work. The Tool Adheres To The Handle In Four Planes, Special Extreme Teeth With 10 Sintered Carbide Each, Placed At The Very Edge Of The Rotor To Clean The Side Walls Of The Mixing Chamber From Accumulated Carbon Deposits Causing Excessive Abrasion Of The Side Walls And Tool Handles, Power Transmission To The Rotor Should Be Carried Out Without The Use Of Belts, For Example Using Gears In An Oil Bath, Built-In Protective Overload Clutches, Hydraulically Adjustable Tailgate With Two Hydraulic Actuators Allows You To Adjust The Quantity And Fineness Of The Starting Material, Warranty And Warranty - Minimum 12 Months, Maximum 24 Months (The Contractor Is Obliged To Indicate In Warranty Period In The Offer Form), The Machine Is Prepared For The Installation Of An Optional Mixing Chamber Spraying System, Availability Of Consumable Parts That Wear Out During Operation. The Contractor Is Obliged To Read The Swz And Its Annexes And Complete The Order On The Terms And Conditions Described Therei
|
