|
Labor Per Installed Camera, Wall Rack 8U, Has 19 Floor Type, With A Height Of At Least 09Us, Has A Depth Of 470Mm, Has 02 (Two) Front Fixings And 02 (Two) Side Fixings, Has An Exhaust Ventilation System, With At Least One Input And One Output For Rack 19 - 110/220V Power Supply, Have Front Door With Lock And Key With Secret, Have Acrylic Or Glass Display, Have All Sae 1020 Steel Plates., Labor Installation Of 8U Rack, 1200V Ups Must Have Nominal Peak Power Of 1200Va / 600W, Must Have A Nominal Input Voltage Of 220V, Must Have Voltage Variation Of 165-265V, Must Have Frequency Of 60Hz, Must Have Circuit Breaker At 10Th Input, Must Have 1.2M Power Cable With Three-Pole Plug In Accordance With Norm Nbr 14136, Must Have Factor Output Power Of 0.5, Must Have Nominal Output Voltage Of 220V, Must It Must Have Voltage Regulation At The Output In Mains Mode: 220V~ ±10% And Battery Mode: 220V~ ±5%, It Must Have A Transfer Time Of <10Ms At The Output, It Must Have A Frequency At The Output In Battery Mode Of 50/60Hz ±1Hz , It Must Have A Waveform, Semi-Sinusoidal (Rectangular), It Must Have 6 Sockets At The Output. 10A In Accordance With The Nbr 14136 Standard, It Must Have Protection Against Under/Overvoltage And Starts To Operate In Battery Mode, It Must Have Protection Against Discharging Batteries Up To 21V, It Must Have Protection Against Overload At The Output. Network Mode: Resettable Fuse And Battery Mode : Limiter, Infrastructure Installation Labor To Protect The Cabling, 08/11/2024, Camera Cabling Kit Full Description On The Tr., Full Hd Dome Camera Must Have 1/2.8 2 Megapixel Cmos Sensor, Must Have Effective Pixels Of 1920 (H) X 1080 (V), Must Have Horizontal Lines Of 1920 (H), Must Have Full Hd Resolution Of 1080P And Analog 600Tvl, Must Have 2.8Mm Lens, Must Have Horizontal Viewing Angle Of 109 Degrees, Must Have Vertical Viewing Angle Of 61 Degrees, Must Have Ir Range Of 20M, Must Have Smart Ir, Must Have Leds, From 1 Unit, Must Have Led Ir Wavelength 850Nm, Must Have Video Format In Ntsc, Must Have Videos With Protocols Hdcvi / Ahd-H / Hdtvi (V2.0) / Analog (Cvbs), Must Have Menu Osd / Vhd Control For Protocol Change, Must Have E65 Db Da Signal-To-Noise Ratio, Must Have Sensitivity Of 0.04 Lux / F1.85 (Agc On), 0 Lux Go On, Must Have Shutter Speed From 1/30 To 1/100000S, Must Have Internal Synchronism, Must Have Electronic Iris, Must Have Automatic Day & Night Setting, Color And, 32-Channel Digital Recorder Full Description In Terms Of Reference., Battery Sealed 7Ah, Full Description In Terms Of Reference., Central Alarm Kit, Description Complete In The Terms Of Reference, Panic Button System The System Aims To Offer An Efficient And Safe Solution For Triggering Emergency Alerts Through Panic Buttons, Allowing A Quick And Coordinated Response By The Monitoring Center. The Contractor Must Provide And Install 02 (Two) Panic Buttons In Strategic Locations, According To The Risk Analysis. Integration Of Panic Buttons With A Secure Communication Network. It Must Be Easy To Access And Identify. It Must Allow Simple And Quick Activation. A Minimum Of 2 Drive Controls Per Unit Must Be Provided. It Must Be Connected To The Monitoring Centers Communication Network. The Panic Button
|
