|
Collective Set (1 Table + 04 Chairs) - Collective Set For Children Between 0.93 And 1.16M In Height, Composed Of A Table And Four Chairs: Table With Mdp Or Mdf Top, Covered On The Top Side In Melamine Laminate, And On The Lower Face In Low Pressure Melamine Laminate (Bp), Mounted On A Tubular Steel Structure. Chair Stackable With Seat And Back In Injected Polypropylene Or Molded Anatomical Plywood, Mounted On A Tubular Steel Structure. Width: 800 Mm; Depth: 800 Mm; Height: 460 Mm; Thickness: 25.8 Mm; Tolerance: Up To + 2 Mm For Width And Depth And +/- 1 Mm For Thickness. Top In Mdp Or Mdf, 25Mm Thick, Covered On The Top Surface In High Pressure Melamine Laminate, 0.8Mm Thick, Textured Finish, In Gray Color, Rounded Corners. Coating On The Lower Face In Low Pressure Melamine Laminate - Bp, In White. Tops Headed With Extruded Thermoplastic Maple Tape, Made Of Pvc (Polyvinyl Chloride); Pp (Polypropylene) Or Pe (Polyethylene), With Primer On The Bonding Face, Textured Surface Finish, In Orange Color, Glued With Hot Melting Adhesive”. Table Structure Composed Of: Feet Made Of Carbon Steel Tube, Cold Rolled, With Seam, Circular Section Diameter Of 38Mm (1 1/2), In Plate 16 (1.5Mm); Crossbars In Carbon Steel Tube, Rectangular Section Of 20 X 40Mm, 5Mm). Fixing The Top To The Structure..., Set For Children With A Height Between 1.19 And 1.42M, Consisting Of A Table And A Chair.Individual Table With Mdp Or Mdf Top, Covered On The Upper Side With Melamine Laminate And On Lower Face Made Of Balancing Plate, Mounted On A Tubular Steel Structure, Containing Injected Plastic Book Holders. Individual Stackable Chair With Seat And Back In Injected Polypropylene Or Molded Anatomical Plywood, Mounted On A Tubular Steel Structure. Width: 600 Mm; Depth: 450 Mm; Height: 594 Mm; Thickness: 19.4 Mm; Tolerance: Up To + 2 Mm For Width And Depth, +/- 1 Mm For Thickness And +/- 6 Mm For Height., Trapezoid Set In High Impact Plastic Resin. Set Composed Of 06 Tables, 06 Chairs And 1 Central Table Child Size Table In Trapezoid Shape, Allowing The Formation Of Circles With 6 Tables 06 Chairs And A Central Table, For Collective And Non-Individual Use, Table Top Made Of Abs Thermoplastic Resin Measuring 660Mm X 240Mm X 440Mm With 390Mm Depth Equipped With Transverse And Longitudinal Ribs To Reinforce Traction At The Bottom. Table Top Structure Formed By 03 Rectangular Industrial Steel Tubes Measuring 30Mm X 20Mm And An Oblong Tube Measuring 30Mm X 16Mm. Height 59Cm. An Oblong Tube Bar Measuring 30Mm X 16Mm Fixed On The Front Between One Of The Side Columns. Table Structure Formed By Two Parallel Side Columns Made Of Industrial Steel Tube In Oblongular Shape Measuring 20Mm X 48Mm Joining The Base Structure Of The Top To The Feet. Base Of The Feet In Oblong Tubes Measuring 20Mm X 48Mm With A Thickness Of 1.5Mm In The Shape Of An Arc With A Radius Measuring A Maximum Of 800.0Mm. Non-Slip Calendered Shoes Enclosing The Ends Of The Tubes That Make Up The Feet, Performing The Function Of Paint Protection, Increasing Durability, Follow The Shape Of The Arched Feet, Measuring Approximately 162Mm X 53Mm And 100Mm , Made From Polypropylene Virgin, May Be Injected
|
