|
Barricade Locationbarricade Location: Assembled In Aluminum With Minimum Dimensions Of 1.10 M High By 1 M Long, With Non-Slip Base Measuring 1 M X 1 M, Step-Type Support 40 Cm High And Capable Of Supporting Up To 150 Kg ., Location Of Closing In Railinglocation Of Closing In Grating: 1.20 In Height And 2.50 In Length Railings Made From Tubular Profiles In Galvanized Steel, Carbon Steel Or Duraluminium, 1 ¼ With 1/8 Inch Wall. Each Grid Must Have 02 (Two) Feet At An Angle To The Side, Therefore, Internal Crossbars Made Of Vertical, Solid Carbon Steel Bars With A Minimum Size Of 3/8. The Center Of Gravity Must Be Equalized At The Lower Bar, With Connection Between The Grids Must Be With A 3/8 Inch Carbon Steel Handle And Tube Adapted For Coupling., Location Closure In Metallic Plateslocation Closure In Metallic Plates: With Plates Made Of Steel Coated In Metalon, In Linear Meter Of Dimension 2.25 Widths Stainless Steel Finish With Passage Record., Rental Closing In Telalocation Closing In Mesh: In High Belgo Type Mesh, Measuring 2 M In Flat Carpet, 100% Polypropylene, Four Millimeters Thick, In Graphite Color (Or Another Color As Requested), Applied On The Floor, Fixed Using Double Sided Tapes Suitable For Carpets, Perfectly Stretched., Tensioned Fabric For Closing And Decoration - Tensioned Lycrafabric For Closing And Lycra Decoration: Specialized Labor For Assembly And Disassembly, Maintenance Team During The Rental Period; Fabric Sewn For The Purposes Of Closing, Isolating Areas, Separating Environments, Lowering Ceilings, Entrance Tunnels And Finishing Structures According To The Request For Each Event. The Fabric Must Cover The Entire Indicated Area To Be Isolated, From The Floor To The Ceiling. It Should Be Structured In Battens, If Necessary. Cutting Points Should Be Provided Where Necessary. The Quantity To Be Requested For Each Event Will Be Equivalent To The Area To Be Covered/Closed Expressed In Square Meters. For Fixing And Tensioning The Fabrics, Nylon Cords Of Medium Thickness Or Transparent Nylon Thread Appropriate To The Load Demand Must Be Used. Fabric Specification: Lycra Type Mesh Or Similar, With A Composition Of 90% Polyester And 10% Elastane, With An Original Width (Before Sewing) Of 1.60 M And A Yield Of 2.40 M/Kg, Increasing In Length Of At Least 20% Of The Roller Between The Resting State And The Tensioned State. Colors: White, Black, Blue, Red, Yellow, Orange, Green, Purple, And Or According To Request For Each Event. All Material To Be Used Must Be Presented In An Excellent State Of Cleanliness And Conservation, And Must Not Present Tears, Holes, Fraying, Wear, Imperfections, Etc. Assembly, Support And Safety Accessories: The Contractor Must Provide All Accessories At No Additional Cost. Assembly, Support And Safety For Decorations, Such As Bases, Shoes, Counterweights, Battens, Marbles, Wires, Straps, Sewing Material, Bushings, Screws, Washers, Ropes, Shims Or Others That Are Necessary For The Execution Of Projects., Locacao De Pal
|
