Tenders Are Invited For Transport Agency Services – Transport, Including Loading And Unloading Work, Storage ... in Germany

Work Detail

Transport Agency Services – Transport, Including Loading And Unloading Work, Storage As Well As The Concept, Production And Provision Of Packaging For Listed Objects At The Headquarters Of The German Bundesbank. The Secured And Packaged Components Are Transported From The Staging Area To A Depot For Transport By The Contractor. An Inventory Is Carried Out Hand-In-Hand By A Contractor Alongside The Packing Work. Deutsche Bundesbank Operational Staff Are Still Present. The Direction Of Work (In The Building) Is From East To West. Escape And Rescue Routes Must Be Kept Clear. In Total, The Net Floor Area (Nrf) Of The Dismantling Area Is Approximately 2,000 Square Meters. Overview Components That Are To Be Secured During Construction And/Or Are Worthy Of Preservation Are Largely Made Of Natural Stone, Valuable Wood, Varnished Wood Or Wood-Based Materials And/Or Plastics Or Aluminum And Are, In Terms Of Construction Time, A Good 50 Years Old (1960/70S). In A Previous Fire Protection Renovation Project In 2014, Components Were Partially Revised Or Replaced. On The 12Th Floor There Is The Following For Dismantling: Natural Stone Wall Cladding Made Of Possibly. Thassos Marble, Aluminum Column Cladding, Wall Coverings And Interior Doors With Top Panels Made Of Makassar Ebony Including Signage (Room Identification In Acrylic Glass), Baseboards And End Strips, A Few Fixtures From Offices. For The Enclosure (Dismantling At A Later Date): Steel Spiral Staircase 4M In Diameter Including Railing In Acrylic Glass Between The 12Th And 13Th Floors. On The 13Th Floor There Is The Following For Dismantling: Large-Format Oak And Bog Oak Wall Coverings Made Of Veneer Wood, Textile Wall Coverings, Single And Double-Leaf Interior Doors Including Signage (Room Identification In Acrylic Glass), Floor-To-Ceiling Large-Format Furniture Doors, Base And End Rails, Ceiling Panels Made Of Wood-Based Materials, Including Painted Ones Surface, Lights & So-Called Climate Lights, Recessed Wall Clocks, Built-In Telephone Booths & Cloakrooms. Construction Process (Process For The Contractor) - Information, Briefing And Instruction By Construction Logistics, Sigeko And Coordination In Accordance With Dguv 101-004, Creation Of Construction Site Id Cards By The Operational Construction Logistics Specialist. - Kickoff For Everyone Involved. - Delivery Of Labeled Storage Racks, Empty Pallet Boxes And All Packaging Material (Fleeces, Boxes, Bags) By The Contractor To The Tent/Canopy (Staging Areas). - In The Staging Areas, Large Components Are Repacked (Supported By Staff From The Shipping Company) By The Specialist Dismantling Trades From The Transport Racks Into The Storage Racks. Repacking Is Necessary Because Due To The Narrow Space Along The Ventilation Center On The 13Th Floor, Large-Format Racks And Boxes Cannot Be Moved Along Here. - Ceiling Panels And Lights As Well As Other Small Parts Can Be Packed Directly On The Floor By The Contractors Of The Specialist Dismantling Trades In Pallet Boxes, Which The Contractors Of The Specialist Dismantling Trades Collect Themselves From The Staging Areas. - The Scanning Protocol For Handover Is Carried Out During Construction

Contact Information