Bids Are Invited For Registration Of Prices For Future And Possible Acquisition Of School Uniforms For Stude ... in Brazil

Work Detail

Short-Sleeved T-Shirt Made Of Pa Knit (52% Polyester And 48% Cotton) With A Weight Of 165 G/M², In Red With Black Cutouts On The Sides. The Short-Sleeved School Shirt Must Have A Straight Collar. The Shoulders, Sides And Sleeves Must Be Sewn Using An Overlock Machine. The Hem Of The T-Shirt Must Be Sewn On A Ready-Made Machine With 2 Wide Needles Measuring 2.0 Cm. To Make This Piece, 100% Polyester Thread, No. 120, In The Color Of The Fabric, Must Be Used. The Thermo-Adhesive Label Of The Coat Of Arms Of The Municipality Of São Carlos, Which Must Be Fixed In A Heat Press (Temperature And Time According To The Needs Of The Machine) And Embroidered Around Its Contour In White So That The Label Can Be Fixed Without Compromising Its Quality . On The Back Of The T-Shirt, It Must Contain A Silkscreen With The Following Writing Education In Arial Black Font. Below It Must Contain The Writing Municipality Of São Carlos - Sc In Arial Silk Font In Black, With The Following Measurements 23.0 Cm Wide By 10. 0 Cm In Height., Long-Sleeved T-Shirt Made Of Pa Mesh (52% Polyester And 48% Cotton) With A Weight Of 165 G/M², In The Color Of The Fabric. Thermo-Adhesive Label Of The Coat Of Arms Of The Municipality Of São Carlos, Which Must Be Fixed In A Heat Press (Temperature And Time According To Each Machine) And Embroidered Around Its Contour In White So That The Label Can Be Fixed Without Compromising Its Quality. On The Back Of The Shirt, School Bermuda Shorts Made Of 85% Polyester 15% Polyamide Helanca Mesh In Black, With A Weight Of 190 G/M², With Side Pockets In The Same Fabric, Folded On A Straight Machine With 1 Needle. Bermuda Shorts Must Have A Heat-Adhesive Label Depicting The Coat Of Arms Of The Municipality Of São Carlos On The Left Leg. Sewn On The External Sides Of The Legs 02 (Two) Gallons 1 Cm Wide In Red, In Helanca Composed Of 100% Polyester With A Weight Of 120 G/M², As Per The Illustrative Drawing. A 4.0 Cm Wide Elastic Band Must Be Sewn Onto The Waist, Nailed On An Overlock Machine And Folded On A Four-Needle Chain Stitch Ratchet Machine For All Sizes. The Hems Of The Hem Must Be Sewn With 2.0 Cm Ready Sewn On A Galloon Machine With Two Wide Needles. The Seams Between The Legs, Sides And Hooks Of The Piece Must Be Sewn Using An Overlock Machine. To Make This Piece, 100% Polyester Thread Must Be Used, Which Must Be Fixed In A Heat Press (Temperature And Time According To The Machines Needs) And Embroidered Around Its Contour In White So That The Label Can Be Fixed And Not Compromise Your Quality., School Pants Made In Helanca Mesh 85% Polyester 15% Polyamide In Black, Folded On A Straight Machine 1 Needle. The Pants Must Have A Thermo-Adhesive Label Showing The Coat Of Arms Of The Municipality Of São Carlos On The Left Side. Sewn On The Outer Sides Of The Legs 02 (Two) Gallons 1 Cm Wide In Red In Helanca Made Of 100% Polyester With A Weight Of 120 G/M², School Jacket Made In Helanca Mesh 85% Polyester 15% Polyamide In Black. Cutout On The Front And Back Of The Jacket In Red, Helanca Composition 85% Polyester 15% Polyamide, With A Weight Of 190 G/M². Knife Pockets, The Jacket Should Also Have A Straight Collar, Hem And Cuffs. The Jacket Must Have A Front Opening With A Detachable Invertible Nylon Zipper, In Black, In Accordance With The Color Of The Body Fabric, With A Stitched Closure From The Hem To The Foot Of The Collar And

Contact Information

Other Detail