Tenders Are Invited For Electrical Wiring And Fitting Work – New Thiene Waterworks, Trade 3: Emsr Technology in Germany

Work Detail

Electrical Wiring And Fitting Work – New Thiene Waterworks, Trade 3: Emsr Technology. This Lot Includes The E/Msr Technology For The Two-Stage Filter System With Pre-Aeration, Post-Acidification, Pure Water Chambers And Pumping Station As Well As The Settling System With Scraper And Pumping Station. This Includes: - Medium Voltage Switchgear, Divided Into Three Subsystems, Installed In The Energy Center - Dry-Type Transformers (2 Pieces, 10/0.4 Kv, 1,600 Kva, Installed In A Waterworks) - Low-Voltage Main Distribution With Longitudinal Separation, Installed In A Waterworks - Low-Voltage Distributions For Approx. 120 Drives ( Approx. 40 Units And Approx. 80 Fittings) And Over 200 Measurements Divided Into: Two Main Distributions For System Technology, One Main Distribution For Building Installation And General, As Well As Approx. 15 Sub-Distributions For System Technology And Building Installation - Frequency Converters For Drives With A Nominal Power Of <1Kw Up To 710Kw, All Frequency Converters Are Connected Via Low Voltage - Automation Technology With S7-1500, Connection To Control Technology Via Profinet - Cabling (Inside And Outside, Medium, Low Voltage And Fiber Optic) - Installation Systems, Lighting, Building Installation And Potential Equalization - Emergency Power System (Installed Outside The Buildings) - Pv System (On The Roofs) Furthermore, An Existing Switchgear For A Ground-Mounted Pv System Must Be Moved From The Existing Waterworks To The Energy Center. The Connection To The Medium Voltage Takes Place Via An Additional Transformer (1 Piece, 10/0.4 Kv, 1,600 Kva, Installed In The Energy Center). The Programming Of The System For Fully Automatic Operation And The Corresponding Visualization Is Carried Out By The Client. Security Technology And Fire Detectors Are Manufactured On Site And Must Be Wired. The Planning Of The Switchgear And Creation Of The Circuit Diagrams Is Carried Out By The Client. The Underground Cable Conduits And Associated Shafts Are Intended For The Civil Engineering And Outdoor Facilities Lot.

Contact Information

Other Detail