|
Supply And Installation Of Construction Plate With Galvanized Sheet And Wooden Structure. Af_03/2022_Ps, Conventional Lease Of Work, Using Template Of Pointed Running Boards Every 2.00M - 2 Uses. Af_03/2024, Mechanically Excavated Pile, Without Stabilizing Fluid, 30Cm In Diameter, Manually Cast Concrete, Assembly Of Transverse Reinforcement Of Circular Section Piles, Diameter = 5.0 Mm. Af_09/2021_Ps, Assembly Of Pile Reinforcement, Diameter = 10, 10/23/2024, Manual Excavation For Crowning Block Or Footing (Without Excavation For Placement Of Formwork). Af_01/2024, Block Frame Using 8 Mm Ca-50 Steel - Assembly. Af_01/2024, Block Frame, Insulated Footing, Baldrame Beam And Running Footing Using 12.5 Mm Ca-50 Steel - Assembly. Af_01/2024, Concreting Of Crowning Block Or Baldrame Beam, Fck 30 Mpa, Using Jerica - Laying, Thickening And Finishing. Af_01/2024, Manufacture Of Formwork For Pillars And Similar Structures, In Resin Plywood Sheet, E=17Mm. Af_09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 5.0 Mm Ca-60 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 10 Ca-50 Steel, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 12.5 Mm Ca-50 Steel - Assembly. Af_06/2022, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 16 Ca-50 Steel, Pumpable Machined Concrete, Resistance Class C30, With Brita 0 And 1, Slump = 100 +/- 20 Mm, Excludes Service Pumping (Nbr 8953), Launching Using A Pump, Densifying And Finishing Concrete Structures. Af_02/2022, Manufacture Of Formwork For Beams, Using Resin Plywood Sheet E=17Mm. Af 09/2020, Pillar Or Beam Frame Of Conventional Reinforced Concrete Structure Using 8 Ca-50 Steel, E = 17 Mm. Af_09/2020, Steel Mesh Composed Of Purlins For Roofs Of Up To 2 Pitches For Fibercement, Metallic, Plastic Or Thermoacoustic Corrugated Tile, Vertical Transport Included. Af_07/2019, Bracing With Steel Angles, Equal Tabs, With Welded Connections, Included Labor, Transport And Lifting Using Manual Hoist, For Buildings Of Up To 2 Floors - Supply And Installation. Af_01/2020_Pa, Roofing With Steel/Aluminum Tile E=0.5Mm, With Up To 2 Waters, Including Lifting. Af 07/2019, Manual Excavation Of Trench With A Depth Of Less Than Or Equal To 1.30M. Af_02/2021., Manual Trench Backfilling, With Percussion Soil Compactor. Af_08/2023, Inspection Box For Grounding, Circular, Made Of Polyethylene, Internal Diameter = 0.3 M. Af_12/2020, Copper Cable, Rigid, Class 2, Pvc/A Insulation, Flame Retardant Bwf-B, 1 Conductor, 450/750 V, Nominal Section 35 Mm2, 1 Threadable Rigid Pvc Conduit, Without Sleeve, Bare Copper Cable 50 Mm2 Medium-Hard, Steel Grounding Rod 3.00 M Long And Dn = 5/8, Coated With Low Copper Layer, With Clamp Type Connector., Rigid Threadable Conduit, Pvc, Dn 50 Mm (1 1/2), For Buried Electricity Distribution Network - Supply And Installation. Af_12/2021, Dn 32 Mm (1), For Terminal Circuits, Installed On Slab - Supply And Installation. Af_03/2023, Electrolytic Galvanized Steel Conduit, Semi-Heavy, Diameter 1 1/2, 1.20 Mm Wall, Corrugated Flexible Conduit, Dn 25 Mm (3/4), Wall Installed - Supply And Installation. Af_03/2023, Insulated Flexible Copper Cable
|
