|
Supply Installation And Commissioning Of Lab. Equipment For Mechanical Engg Dept , Separating & Throttling Calorimeter With Mini Boiler Features: • Determining The Vapour Content Using O A Separating Calorimeter With Cyclone Water Separator O A Throttling Calorimeter With Vapour Depressurization • Using An H-S Diagram Specifications: Supplied Vapour • Temperature: 240°C • Pressure: 10Bar Safety Valve: 10Bar Measuring Ranges • Temperature: 0…400°C • Pressure (Inlet): 0…16Bar • Pressure (Outlet): -150…100Mbar 230V, 50Hz, 1 Phase 230V, 60Hz, 1 Phase 120V, 60Hz, 1 Phase Dimensions And Weight: • L X W X H: 800X 800 X 1700 Mm • Weight (Approx.): 110 Kg , Steam Turbine Power Plant Setup Features • Steam Power Plant And Its Components • Start-Up, Operation And Shut Down Of A Steam Power Plant • Closed Steam-Water Circuit With Feed Water Treatment • Among Others, Determining: O Boiler Efficiency O Mechanical/Thermal Efficiency Of The Turbine O Condenser Efficiency O Specific Fuel Consumption Of The Plant Specification Steam Generator • Steam Output: 200Kg/H At 11Bar • Fuel Consumption: 12L/H • Heat-Up Time: 8Min • Pressure: 13Bar Super Heater • Power: 7Kw Single-Stage Axial Turbine With Curtis Wheel And Hydraulic Speed Regulator • Power: Max. 1,5Kw At 3000Min-1 Water-Cooled Condenser • Cooling Capacity: 98Kw • Transfer Surface: 2,5M2 Measuring Ranges • Temperature: 9X 0…400°C, 2X 0…100°C • Flow Rate: 0…167L/Min (Cooling Water) • Pressure: 3X 0…16Bar, 1X ±1Bar • Torque: 0…20Nm • Speed: 0…4000Min-1 400V, 50Hz, 3 Phases 400V, 60Hz, 3 Phases, 230V, 60Hz, 3 Phases Dimensions And Weight • L X W X H: 3500X 2500 X 2250 Mm Weight (Approx.): 2250 Kg , Rotary Air Compressor Test Bench Features: • To Study All Components/Accessories Used In Rotary Air Compressor. • To Study & Determine Isentropic Work, Actual Work Volumetric • Efficiency, Isentropic Efficiency & Free Air Delivery At Different Delivery Pressure. • To Plot Volumetric Efficiency/Isentropic Efficiency Against Delivery Pressure & Comment On The Nature Of The Plot. Observations Can Be Taken By Air Compressed In Storage& Free Condition. • Instrumentation: Sensors With Digital Displays • Software For Data Acquisition Via Usb Specifications: • Vane Compressor – Rotary Compressor, Driven By 3 Hp Motor. • Calibrated Orifice Meter With Water Manometer To Measure Air Intake. • Energy Meter To Measure Input Of The Meter. • Pressure Gauge To Measure Discharge Pressure. • Control Valve At Delivery Side. • Stop Clock. Dimensions And Weight: • L X W X H: 1500X 1500 X 1250 Mm Weight (Approx.): 320Kg , Marcet Boiler Test Apparatus Features: • Recording The Vapour Pressure Curve Of Water • Presentation Of The Relationship Between Pressure And Temperature In A Closed System • Temperature And Pressure Measurement Specification: Bourdon Tube Pressure Gauge: -1…24Bar Temperature Limiter: 200°C Safety Valve: 20Bar Heater: 2Kw Boiler, Stainless Steel: 2L Measuring Ranges • Temperature: 0…200°C • Pressure: 0…20Bar 230V, 50Hz, 1 Phase 230V, 60Hz, 1 Phase 120V, 60Hz, 1 Phase Dimensions And Weight: • L X W X H: 800X 600 X 600 Mm Weight (Approx.): 45 Kg , Rope Brake Dynamometer Power 0.5 Kw Voltage 220 V Phase Single Phase Frequency 50 Hz Material Stainless Steel Wheel Size 45 Cm , Cam Analysis Apparatus Capacity 7. 5 Hp Phase 3 Phase Speed 1500 Rpm Frequency 50 Hz Material Stainless Steel 304 Color Blue , Slip Gauge Set Steel Sets With High Wear Resistance. 47 & Nabl Calibration Slip Gauge Set Steel Sets With High Wear Resistance. High Level Accuracy And Reliability Of Measuring Results Are Guaranteed By Precise Calibration. Provided With Nabl Traceability If Required. Sets Of M46, M87, M112. Metric/Imperial. , Bevel Protector Blade Length 150Mm W/60, 40Degree Edges, Required Stand And Type , Sine Bar Range 200Mm For Checking Concentricity, Run Out Of Sharpness Taken & Degree Checking , Digital Outside Micrometer Specification Range 0-25Mm , Digital Vernier Caliper Specification Range 0-150Mm/6” , Radius Gauge Radius Gauge 1-7Mm , Surface Plate Granite “A” Grade 24 X 36 Inch In A Class Granite , Mechanical Comparator Analog Type With Dial Gauge & Stand Mechanical Comparator Analog Type With Dial Gauge & Stand Available In Two Models Measuring Base Size Of: 125Mm X 125Mm And 60Mm Ø. Material: Hardened Tempered & Precision Ground Alloy Steel. Vertical Range: 130 Mm & 130 Mm. Horizontal Displacement : 40 Mm. Throat Depth : 130 Mm & 45 Mm Pillar Diameter: 31 Mm. Net Weight: 11.500Kgs & 2.500 Kgs. Mitu Toyo 7011S-10 Magnetic Stand & Dial Gauge 20465, 0.01Mm X 10Mm Dial Indicator 0-100 *** Back , Thickness Gauge Measuring Range: 0 – 30 Mm Jaw: 50 Mm Resolution: 0.1 Mm , Gear Tooth Micrometer Least Count: 0.01” Or 0.02Mm , Optical Flat With Monochromatic Check Light To Check Surface Flatness • Dia / Thickness: 45 Mm / 12 Mm • Flatness: 0.002 Mm (0.2 ?) • Monochromatic Light Source: 35 Watts Sodium Lamp • Application: Micrometer Calibration / Mechanical Flatness Inspection , Bench Micrometer For Screw Thread Measurement • 0 – 25 Mm Digital Bench Micrometer • Accuracy: ±0.001 Mm • Material: Stainless Steel , Standard Wire Gauges Imperial Standard Wire Gauge Used With Wire And Sheet Metal As Per Bs: 3737:1964 , Straight Edges • Length: 150 Mm • Section: 60Ovee , Snap Gauge • Measuring Range: 0 – 50 Mm • Material : Carbide • Shape: ‘C’ Shape • Accuracy: 0.001 Mm • Size: 2 Inch , Plug Gauge • 20 Mm [H7] • Go / No Go Plan Plug Gauge • +0.01Mm / +.005 Mm Go Tolerance • +0.019 Mm / +0.023 Mm No Go Tolerance , Ring Gauge • 20 Mm [H7] • Go / No Go Plan Ring Gauge • +.001 Mm / +0.005 Mm Go Tolerance • +0.019 Mm / +0.023 Mm No Go Tolerance , Pneumatic Cum Electropneumatic System Trainer The Complete Trainer Mounted On Table Top Anodized Sturdy Light Weight With Aluminium Profile Grooved Plate Experiment Board With Flow And Pressure Regulator Unit With Pressure Gauge (10 Bar),1/4” Bsp(F)Manifold 4 Way ¼” Bsp (F) With On/Off 4 Nos. Ball Valve. One Way Flow Control Adjustable Valve ¼”Bsp (F) Air Compressor: Working Pressure 7 Bar;230V/50Hz,1Ph With Shutoff Valve, Safety Valve And Storage Tank 30-50Ltr Control Elements: 3/2 Way Directly Actuated Valve With Push Button, 3/2 Way Single Solenoid 24Vdc, 5/2 Way Pilot Operated Spring Return Valve ¼”Bsp(F), 5/2 Double Solenoid Valve 24Vdc Actuating Devices: Single Acting Cylinder Bore 25Mm, Stroke 100Mm, Double Acting Cylinder Bore 25Mm, Stroke 100Mm, Bidirectional Air Motor (Vane Type) , Sensor/Transducer Trainer Kit Sensor/Transducer Trainer Kit Designed With Abs Injection Moulded Sturdy Electronic Desk Withinput Power Supply Of 230V,50 Hz Built In Output Power Supply: +/- 12V, 500Ma, Variable 5V To 14 V @3Amp Provided With Following Sensors: A) Pressure: Piezo Resistive Transducer For Pressure Measurement( 0 To 15Psi) With Pressure Generating Hand Pump,Signal Conditioner And Proper Patching Cords. B) Force/Weight Measurement: Strain Gauge Type (0 To 10 Kg) With Signal Conditioner And Output For Multimeter Display C) Displacement Sensing: Sliding Pot (0-50 Mm), Rotary Pot(0 To 1800) And Lvdt Transducer(0 To 20Mm) With Signal Conditioner And Proper Output To Read With Digital Multimeter. D) Level Measurement: Float Type(0 To 100Mm) With Signal Conditioner And Output E) Speed Sensor: 12 V Dc Motor (0-1500Rpm) With Optical Sensor3 ½ Digit Digital Display
|
