|
Tender For Special Repair Of Otm Bldg No T-139 Of Inf Bn-Iii At Shahjahanpur Cantt Under Ge (East) Bareilly; 1 Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm(without taking off shutters from the frames) complete all as specified and directed. 2 S&F 35mm thick 1st class hardwood(shisham) in plain, framed, panelled shutters (any numver of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified and directed. 3 S&F 35mm thick 1st class hardwood(shisham) Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. 4 S & F framed work as in chowkats or frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fixing complete all as specified and directed. 5 S&F 0.63 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks, water troughs, ducts,urinal trough and funnels etc, cut to size,edge beaded if directed, holes punched , including round headed screw, clout nails or rivets and fixed to wood or steel members, etc, with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angle, stopped ends, outlet, etc,complete all as specified and directed. 6 Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed. 7 Repair/rectification to window of size n.exc 1.50 sqm including welding, hinges, tack weld to wiremesh and fixing of peg stay and repair to handle & tower bolts with minor assesories like handles, nut bolts, hinges, tower bolts etc & making goodcomplete all as specified and directed 8 S&F steel window with pressed steel frame of size 95mmx45mm(using 1.25mm thick PBI sheet) side hung shutter including box type hinges with steel handle and steel peg stay complete with glazed openable shutter with glazing bar (open out side) and wire gaugeed openable shutter without glazing bar (open inside), devetailed or welded complete all as specified and directed and as per Drg no TD/088 Dated 07 Jan 2002.. (i) Two shutter i.e. wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit. (ii) rate for filling of PCC 1:3:6 type C1(using 20 mm graded stone aggregate) frame deemed to be included in quoted rate. (iii)MS grill,wire gauge and glassshall be measured and paid seperately. 9 S&F steel ventilator with top hung shutter includingincluding hinges ISI marked steelpeg stay complete all as specified and directed 10 M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work ofwater tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed. 11 S&F 4mm thick sheet glass, ordinary quality and glazing with oil puttyin square n exc 0.5 Sqm in each pane complete all as specified and directed. 12 S& Fgalvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed. 13 S&F for 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. 14 S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. 15 S&F 300mm long mild steel sliding door bolts, bolt or clip type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed. 16 M&L for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed. 17 S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specifed and directed. 18 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed. 19 S&F, 200 mm long aluminium anodised barrelbarrel tower bolts of extruded section and fixed as specified and as directed. 20 S&F 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type B-21 complete all as specified and directed. 21 S&F 125 mmaluminium handles cast type, anodised complete all as specified and as directed. 22 M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width or girth of any description complete all as specified and directed. 23 M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Twocoats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 24 Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth all as specified and as directed. 25 S&F 140 mmfloor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed. 26 S&F curtain rod 25mm dia , mild steel, chormium plated/pvc coated with fixing bracket, stops,rollers etc for hangging curtain rod complete all as specified and directed. 27 Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed. 28 M & L Glazed ceramic coloured tilesin vertical surface 450mmx300mmx7mmthick set and jointed in neat cement slurry and pointed in white cementor colour cement over and including 10 mm thick in CM 1:4 screed bed complete all as specified and as directed. 29 M&L providing non- skid glazed ceramic tiles coloured7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to matchcoloured tiles over and including 15 mm thick cement screed bed in CM 1:6complete all as specified and as directed. 30 M&L for vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles not less than 0.36 sqm in floor etc set and jointed in neat cement slurryover and over and including15 mm thick screed bed ofcement mortar in 1:6 and pointed in white or coloured cement to match coloured tilescomplete all as specified 31 M&L providing vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles not less than 0.36 sqmin dado/skirtingetc set and jointed in neat cement slurry over and including10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tilescomplete all as specified 32 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed. 33 M&L brushing neat cement slurry with 3.0Kg of cement per sqm and complete all as specified and as directed. 34 M&L for machine cut mirror polish kota stone slab flooring20-25mm thich over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including rubbing and polishing complete all as specified and directed. 35 M&L for machine cut mirror polish kota stone slab 20-25mm thick with rounded edges as in risers of steps, skirting, dado etc including rubbing and polishing complete all as specified and directed. 36 Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc all as specified and directed. 37 M&L rendering 15mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cementall as specified and directed. 38 M&L rendering 12mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even andfair without using extra cementcomplete all as specified and directed. 39 M&L rendering 10 mm thick in cement plaster 1:4 on concrete surfaces of ceilling and finishing the surface even and smooth withour using extra cement complete all as specified and directed. 40 M&L for preparation of new plastered surfaces of walls and applying three coats of white wash using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. (Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.) 41 M&L for preparation of Old plastered surfaces of walls and applying three coats of white wash using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.( Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer). 42 M&L for 2 mm thickWall putty on old/newly plastered walls complete all as specified and directed 43 M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. (B : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer). 44 M&L for preparation of Oldplastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed. (Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.) 45 M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specfied and directed. 46 M&L for preparing old plastered surfaces of walls and applying two coat of cement base paintcomplete all as specfied and directed. 47 M&L for preparing newly plastered surfaces of ceiling and applying three coat of white washcomplete all as specfied and directed. 48 M&L preparing Old plastered or unplastered surfaces of ceiling and applying two coat of white wash on old decorated surfacecomplete all as specfied and direcetd. 49 Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. 50 M&L for Sand filling under floors/ paver block or in foundationincluding watering and consolidation complete all as specified and directed. 51 M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 50 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and directed. 52 M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Pathfinishing cement concrete even and smooth without using extra cement all as specified and directed. 53 M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panelfinished even & smooth with using extra cement as in flooring complete all as specified and as directed. 54 Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed. 55 Demolition of cement concrete (unreinforced) inroofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work all as specified and directed. 56 M&L plain PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in rooffor maint the uniform slope etc any thickness complete all as specified and directed. 57 M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane mineral type top (weight not less than 4 kg/sqm, 3mm thick consisting 100 mmmicron HMHDE FILM )over and including 10 mm thick rendering in CM 1:4 includingintegral waterproofing compound 3%by weight of cement or as per manufacturer instruction and complete all as specified and directed 58 Demolition of cement concrete (un reinforced) of any descriptionand in any position not other specifically provided for all as specified and direcetd. 59 M&L for preparation of sunken floorremoving of all existing treatment, brick bats and cleaning applying of 10 mm thick plaster CM 1:3 mixed with WPC as per manufacures instuctions i.e 3% by weight of cement and applying high preformance plyuerethane liquid membrane roof casting cold applied in two coat @ 1.5kg/sqm applied with spray/brush ane elongation of 300% to 700% and applying prime coat @ 0.15kg/sqm and a geotextile of 40 GSM miced in the reatio as per manufacturers specification, and PU caoat in two layers, final PU coat is sprinkled with a micro layer of sand complete all as specified and directed complete all as specified and directed 60 M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as infoundation filling and mass concrete complete all as specified and directed. 61 M&L PCC 25mm thick 1:2:4 of type B0( using 12.5mm graded stone aggregate) as in base of floors cover fillet/beads ofwith wpc @ 5% by weight of cement complete all as specified and directed. 62 S&in replacement vitreous china squatting pan Orissa pattern size 580mmx 440mm white with integral foot rests excluding flushing cictern and flush pipeall as specified and directed. 63 S&F in replacement vitreous china wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. 64 S&F in replacement plastic water closet seat cover black closed pattern with flat bottom and coverand mild steel chromium plated or aluminium hinging device all as specified and directed. 65 S&Fin replacement, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 66 S & F in replacement 10 ltrs capasityPVC valveless syphonic action typeflushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high densityor PVC 32 mm dia for low level cistern complete all as specified and as directed. 67 S&F in replacement vitreous china wash basin white, oval type size 550 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe or as on RCC shelves top completeall as specified and directed 68 S&F in replacement only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed. 69 S&Fin replacement 15mm bore pillar tap cast copper allloy with capstan headChromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed. 70 S&F in replacement bib taps 15mm bore chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd. 71 S&F in replacement angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrulefor 15 mm bore of pipe complete all as specified and as directed. 72 S&F in replacement Vitreous China Urinal, Half Stall type(back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe 73 S&F vitreous china urinal partition white of size 310X700mm complete all as specified and direcetd. 74 S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and direcetd. 75 S&F 450mmx 600mm bevelled edges mirror consisting of 5.5mm thick commercial plywood and fixed to plug with chromium plated brass screwed and cup washer all as specified and direceted. 76 S&Fin replacement PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified. 77 S&Fin replacement PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified. 78 S&Fin replacement 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified and direceted. 79 S&Fin replacement swivel shower rose dia 120 mm of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed. 80 Dismantling ofexisting water tanks capacityexc 500 ltr n exc 1000Ltsand removing to store complete all as specified and directed. 81 S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoistedand fixed in position triple layer in white colour all as pacific SSR Part- I,including metalic cover (GI basin as cover) complete all as specified and directed. 82 S&F20 mm bore gun metal ,globe or gate valves, with iron wheel head , screwed both ends for iron pipe complete all as specified and directed. 83 S&F 20 mm bore Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferruleall as specified and directed. 84 Taking up or down existing steel tubing 15mm bore and connections including cleaning for refixing or removal from site complete all as specified and directed for complete all as specified and directed. 85 Taking up or down existing steel tubing 20 mm bore and connections including cleaning for refixing or removal from site complete all as specified and directed for completeall as specified and directed. 86 S&F 15mm bore Unplasticiscd CPVC pipes of pressure rating 10 kgf/cm2 laid in trenches/ wall water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed. 87 S&F 20mm bore Unplasticiscd CPVC pipes of pressure rating 10 kgf/cm2 laid in trenches/ wall water tubing medium grade galvanised with all fittings and fixed complete to walls and ceilling or laid in floor complete all as specified and directed. 88 Taking up or down existingpipe any classany size , (including all fitting) including disconnecting pipes 75/110 mm bore and fittings completeall as specified and directed. 89 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed. 90 S&F 75 mm bore PVC (SWR) pipes ofsingle socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. 91 S&F 75 mm bore. PVC (SWR) bends complete all as specified and directed. 92 S&F110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed. 93 S&Ft110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallcomplete all as specified and directed. 94 S&F 110 mm PVC (SWR) bend any radius completeall as specified and directed. 95 S&F 110mm bore.PVC(SWR) junction single (single T) equal or unequal with access doorcomplete all as specified and directed. 96 S&F stack clamps out of 20mmx3mm flat iron for PVC 75 mm dia pipe with wall,for fixing includingsecuring ends of stays to ball or roof completeall as specified and directed. 97 S&F stack clamps out of 20mmx3mm flat iron for PVC 100 mm dia pipe with wall,for fixing includingsecuring ends of stays to ball or roof complete all as specified and directed. 98 Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles etc complete all as specified and directed. 99 M&L brick work with fly ash bricks conforming to IS 12894 -2002 specification straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed 100 M&L brick work with fly ash bricks conforming to IS 12894 -2002 specificationstraight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed. 101 Material and labour for Chipping of unsound/weak concrete materials offrom Column/beams with standard power driven percussion type or pneumatic chiesel of standard make includingtaperingall edges, making square shoulders of cavities etcupto any height including necessary scaffolding and safety measures complete all as specified and as directed. 102 Material and labour for Chipping of unsound/weak concrete materials offrom slabs/chajja with standard power driven percussion type or pneumatic chiesel of standard make includingtaperingall edges, making square shoulders of cavities etc upto any height including necessary scaffolding and safety measures complete all as specified and as directed. 103 Material and labour for removingconcrete all around reinforcementincluding behindofbarsto give an averageclearence of 25mm (but not less than 15mm clear air gap) by manual methods (hammering the rebar using wire brushes, chieselling etc.) length of reinforcement bars cleared of concrete shall be measuredfor payment including upto any height necessary scaffolding and safety measures complete all as specified and as directed. 104 Material and labour for Cleaning of exposed concrete surface of lightly sticking materials including foreign materials, loose concrete/ aggregate etc and disposal of all debris upto distance of 50 Mtr complete all as specified and as directed. 105 Materials and labourforapplyingsingle coat of epoxy bond adhesive on prepared non metallic surface (existing surface) by using brush as per manufacturers instruction / specification upto any height including necessary scaffolding and safety measurescomplete all as specified andas directed. 106 Exposing the corroded reinforcement upto and including 16mm dia of bar completely along its full circumference, cleaned to remove all loose scale and corrosion deposit, applying rust removing chemical followed by removing the rust by emery paper and cleaning the area thoroughly by water and allow it to dry as permanufactures instruction upto any height including necessary scaffolding and safety measures complete all as specified and as directed. 107 Supply and application of Epoxy Zinc rich primer on the prepared Reinforced surface by brush, the primer shall have a minimum specific gravity 1.75, minimum wet film thickness/coat 100 microns & dry film thickness/coat 40 microns. Minimum adhesive bond strength with steel is 1.5 N/mm2 upto any height including necessary scaffolding and safety measures complete all as specified and as directed. 108 Supply and application free flow non-shrink cementitious micro concerete to the affected beam, column etc. above 45 mm but upto 60mm thickness (average)where major spalling has taken place even the core of concrete affected. The Micro concrete shall have a minimum 1 daycompressive strength of 10 MPa and 28 days strength of 50 MPa, Minimum tensile strenght 2 N/mm2 @ 28 days, minimum Flexural strength 5 N/mm2@ 28 days tested as per BS 4551-80, Expansion characterstics Unrestrained expansion as per ASTM C827-1987 1 to 4%. including necessary formwork, upto any height including necessary scaffolding and safety measures complete all as specified and as directed. 109 Supply and application Two component structural grade polymer modified reinstatement mortar where local spalling has taken place or shuttering is not possible. The Mortar can be applied from a minimum of 5mm to 15mm thickness in smaller vertical pockets and upto 100 mm thickness in horizontal applications. The Mortar should have a minimum compressive strength 12 N/mm2 in 1 day and 4 5N/mm2 in 28 days. Minimum Flexural strength should be 8 N/mm2 in 28 days. A modified styrene butadience emulsion for use as a bonding aid and gauging liquid for cementitous systems to be mixed with cement slurry before the application of microconcrete to be used @ 6 lit/bag of cement. The bonding agent should have minimum compressive strength 24 N/mm2 Minimum Tensile strength 3.5 N/mm2, Minimum Flexural Strength 6.5 N/mm2 including necessary scaffolding and safety measures complete all as specified and as directed. 110 Materiall and labour applying concure LP 90 or equivalent over concrete and cement plaster as curing compundas per manufactures instructions including necessary scaffolding and safety measurescomplete all as specified and as directed. 111 Materials and labourfor introducing new reinforcement bars for structural connections in RCC beam, lintels, columns and slabs etc including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm upto 200mm including power drilling, fixing the reinforcement in position using epoxy after dusting ofloose dust by blowing air, sealing the same with epoxy cartridges etc as per manufacturer instruction for upto 12mm dia of bars (including reinforcement of 12 mm dia bars)complete all as specified and as directed. 112 Taking down carefully, old unserviceable aluminium point wiring (light, fan, socket, bell, buzzer or power) complete including unserviceable fittings such as switch, socket, ceiling rose, lamp holder, light fittings, bakelite sheet, terminal box, etc. and making good to disturbed surfaces of wall/floor and ceiling etc. and removal, complete all as specified and as directed ( Note:- Existing LED bulbs/fittings are not to be removed and rates are inclusive of taking down & refixing of existing LED fitting at any location. Disturbed surfaces shall be made good by plastering and applying two coats of white wash or OBD to match the existing surface finishes). 113 Taking down carefully by unscrewing from DB box MCB SP/SPN/TPN of sizes & any capacity complete all as specified and directed 114 Taking down carefully by sub main wiring of any sizecomlete all as specified and directed. 115 Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLSH cable complete with all fittings and accessories but using existing sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLSH cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :-NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc.(a).One light/fan point controlled by one switch 116 (b).One 3-pin socket outlet 5/6 Amp on independent board. 117 (c).One 3 pin socket outlet 5/6 Amp on same board. 118 All per Srl item No. 4 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15/16 Amp on independent board. 119 Material and labour for two single core PVC Insulated unsheathed multi stranded FRLSH copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLSH copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. 120 Material and labour for two single core PVC Insulated unsheathed multi stranded FRLSH copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLSH copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified. 121 S & F inswitch piano flush type polycarbonate SP one way 5 Amps complete all as specified and directed. 122 S &F switch piano flush type polycarbonate SP one way 15 Amps complete all as specified and directed. 123 S&F socket out let 3 pin 5 amp multipurpose flash type complete all as specified and directed 124 S&F socket out let 3 pin 5/15 Amp multipurpose, flush type 240 volt complete all as specified and directed.. 125 S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete all as specified and directed.. 126 S&F for lamp holderinsulatedbody of PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed. 127 M & L for replacement of Step regulator electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as specified and directed.. 128 S&F in replacementMCBs SP 6-32Amps breaking capacity 10 KAB series 240 volts 50 Hz complete all as specified and directed. 129 S&Fin replacementMCB SP&N 10 to 63 Amps breaking capacity 10 KAC series 240 volts 50 Hz complete all as specified and directed. 130 Supply and fix MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar withIP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted. 131 Supply and fixing in replacementLED lights fitting 1x 20W, 220V,AC decorative batten type with driver, holder includingLED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. with suitable size all as specified and as directed. 132 Supply and fixing in replacementLED bldg security light fitting 35 Watt230 V AC outdoor type with high pressure diecastaluminumhosingandheatresistantcomplete with driver, lamp bracket with impactandcorrosionresistantincludingthermalmanagementinmultipleopticscompletewithIP 65/66 protection complete. including Connecting up with 3 core flexible copper cable of suitable size. 133 S&F Sheet metal enclosure TPNdistribution board vertical type double door with insulated bus bar arrangement IP 43 protection4 way 415V complete all as specified and directed . 134 Taking down and refixing afterpaintingof Ceiling fan of any size any capacity such as replacement of bearing, shaft, bushes,capacitor, blade, locking pins, louvers ,nut bolt and washers complete & Spray painting with synthetic enamelled paint of approved colourwith mounting bracket and grouting the foundation bolt in wall and making connection complete all as specified and as directed 135 Supply and laying including taking out from trenches and poles XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified and directed. 136 S&F in replacement MCCB 4 pole 63 Amps 10 KAcomplete all as specified and directed. 137 Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPEcable and getting soft/loose soilcomplete all as specified and directed. 138 Returning , filling in including spreading, leveling, watering and well ramming in laying not exceeding 25 cm thick in soft/loose soil completeall as specified and directed. 139 Removing excavated material (soils) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point completeall as specified and directed. 140 Material and labour for river fine sand, washedand screened dry for cushioning to underground cable in trenches below and around underground cable includingspreading and levelingpunningcomplete all as specified and directed. 141 M&L for laying bricks,sub class B for protection of cable, in trenches, laid in dry flat across the cable with length of whole bricks complete all as specified and directed.
|
