|
Tall Storage Module, With 02 Doors And 04 Shelves (Carbon Steel, Mdf And Abs) Module In Carbon Steel, Mdf And Abs, Can Be Dismantled Into 11 Parts: 2 Sides, 1 Bottom, 1 Base, 1 Headboard, 2 Doors , 4 Dividing Shelves. Upper And Lower Closure In Abs In Gray Color, With 4 Mm Wall Structure (In Any Cross Section), Having 6 “Castles” For Fixing To The Rectangular Structure, (Tube 25 X 25 Mm) Used For Joining Between Plastic Base And Rectangular Structure, Special Screws For Plastic. The Module Must Have The 12 Vertices That Make Up Its Shape With A Radius Of At Least 50 Mm, Without Meetings And Edges With Sharp Corners. The Module Is Assembled Using Screws And Rivets. The Feet Of The Module Are Made Of Injected Plastic In The Same Gray Color, With A Round Shape And A Diameter Of 50 Mm, A Height Of 25 Mm, A Shoe Wall With A Thickness Of 3.5 Mm, The Final Edge In Contact With The Chamfered Floor With An Inclination Of 45° And Height Of 2 Mm, With 5/16 Central Screw That Allows Its Adjustment. Cylindrical Drum Type Lock With Folding Key. Cabinet Body Made Of Steel Sheet Sae 1010/1020 Thick, 0.75 Mm. Right And Left Sides Of The Cabinet, With Racks Printed Directly On The Side, With A Minimum Adjustment Of 100 Mm Between Points, Allowing The User To Place The Shelves At Various Heights. Base Structured Using Sae 1020 Carbon Steel Tube 25 1 Inch, Diameter At Wall 1, These Four Tubes Will Be Welded Perpendicularly To The Rectangular Frame To Form The Four Feet Of The Cabinet. Insert Internal Bushings With A 5/16 Inch Diameter Nut That Will Receive The Bulged Shoes Into Their Ends. Two Doors Confec. In 18 Mm Mdf, Covered On Both Sides In Low-Pressure Melamine Laminate In White Color - Tr., Childrens Set Consisting Of 06 Tables, 06 Chairs And 01 Central Table. Childrens School Table: With Simplified Assembly And Allows It To Be Used As A Childrens Toy. It Comprises A Structural Body, A Book Portal And A Substantially Trapezoidal Top. The Body Is One-Piece Polyhedral Shaped And Molded In The Injection Process With Thermoplastic Called Polypropylene Copolymer In A Single Piece, Being Composed Of A Wide Front Foot With A “U” Shaped Cross-Section, Facing Inwards, And Two Rear Feet Also Shaped Like “U”. U, Forward-Facing And Gently Arched, Upper Beams And Lower Beams Connect The Front Feet To The Rear Feet. The Top Has A Substantially Trapezoidal Shape And Is Molded Using An Injection Process With Material Called Abs, But With A Smaller Rounded Base And Chamfers At The Ends Of The Larger Bases. A Transverse Groove, Positioned Next To The Smaller Base Of The Top, Is Intended For Holding Objects. The Book Holder Has The Shape Of A Triangular Plate And Is Molded Using An Injection Process With A Material Called Polypropylene Copolymer, With A Rounded Front Apex, Being Fitted To Rails Located On The Inner Surfaces Of The Upper Crossbars Of The Body And Being Fixed By Means Of Protruding Pins. That Protrude From The Plate And Penetrate Into Holes In The Upper Crossmembers. The Dimensions Of The Table Are Around 620 Mm On The Larger Base, 235 On The Smaller Base And 465 Mm Laterally And An Average Thickness Of 3.5 M
|
